New in version 2.2.
|auto_recovery ||yes|| || |
Enables/Disables auto recovery
|delay_restore ||no|| |
manages delay restore command and config value in seconds
|domain ||yes|| |
|host ||yes|| |
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|password ||no|| |
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable
|peer_gw ||yes|| || |
Enables/Disables peer gateway
|pkl_dest ||no|| |
Destination (remote) IP address used for peer keepalive link
|pkl_src ||no|| |
Source IP address used for peer keepalive link
|pkl_vrf ||no||management|| |
VRF used for peer keepalive link
|port ||no||0 (use common port)|| |
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
|provider ||no|| |
Convenience method that allows all nxos arguments to be passed as a dict object. All constraints (required, choices, etc) must be met either by individual arguments or values in this dict.
|role_priority ||no|| |
Role priority for device. Remember lower is better.
|ssh_keyfile ||no|| |
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable
|state ||yes|| || |
Manages desired state of the resource
|system_priority ||no|| |
System priority device. Remember they must match between peers.
(added in 2.3)
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
|transport ||yes||cli|| |
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
|use_ssl ||no|| || |
Configures the transport to use SSL if set to true only when the
|username ||no|| |
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable
|validate_certs ||no|| || |
- name: configure a simple asn nxos_vpc: domain: 100 role_priority: 1000 system_priority: 2000 pkl_dest: 192.168.100.4 pkl_src: 10.1.100.20 peer_gw: true auto_recovery: true - name: configure nxos_vpc: domain: 100 role_priority: 32667 system_priority: 2000 peer_gw: true pkl_src: 10.1.100.2 pkl_dest: 192.168.100.4 auto_recovery: true
Common return values are documented here Return Values, the following are the fields unique to this module:
commands sent to the device
|always||list||['vpc domain 100', 'peer-keepalive destination 192.168.100.4 source 10.1.100.20 vrf management', 'auto-recovery', 'peer-gateway']|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
For more information about Red Hat’s this support of this module, please refer to this
knowledge base article<https://access.redhat.com/articles/rhel-top-support-policies>
© 2012–2017 Michael DeHaan
© 2017 Red Hat, Inc.
Licensed under the GNU General Public License version 3.