wprintf, fwprintf, swprintf, wprintf_s, fwprintf_s, swprintf_s
 (1)  
int wprintf( const wchar_t *format, ... );
 (since C95) (until C99) 
int wprintf( const wchar_t *restrict format, ... );
 (since C99) 
 (2)  
int fwprintf( FILE *stream, const wchar_t* format, ... );
 (since C95) (until C99) 
int fwprintf( FILE *restrict stream,
const wchar_t *restrict format, ... );
 (since C99) 
 (3)  
int swprintf( wchar_t *buffer, size_t bufsz,
const wchar_t* format, ... );
 (since C95) (until C99) 
int swprintf( wchar_t *restrict buffer, size_t bufsz,
const wchar_t *restrict format, ... );
 (since C99) 
int wprintf_s( const wchar_t *restrict format, ...);
 (4)  (since C11) 
int fwprintf_s( FILE *restrict stream,
const wchar_t *restrict format, ...);
 (5)  (since C11) 
int swprintf_s( wchar_t *restrict buffer, rsize_t bufsz,
const wchar_t* restrict format, ...);
 (6)  (since C11) 
int snwprintf_s( wchar_t * restrict s, rsize_t n,
const wchar_t * restrict format, ...);
 (7)  (since C11) 
Loads the data from the given locations, converts them to wide string equivalents and writes the results to a variety of sinks.
1) Writes the results to
stdout
.
2) Writes the results to a file stream stream
.
3) If bufsz
is greater than zero, writes the results to a wide string buffer
. At most bufsz1
wide characters are written followed by null wide character. If bufsz
is zero, nothing is written (and buffer
may be a null pointer), however the return value (number of wide characters that would be written) is still calculated and returned.
46) Same as
(13), except that the following errors are detected at runtime and call the currently installed
constraint handler function:
 the conversion specifier
%n
is present in format
 any of the arguments corresponding to
%s
is a null pointer

format
or buffer
is a null pointer

bufsz
is zero or greater than RSIZE_MAX/sizeof(wchar_t)
 encoding errors occur in any of string and character conversion specifiers
 (only for
swprintf_s
) the number of wide characters to be written, including the null, would exceed bufsz
.
7) Same as (6), except it will truncate the result to fit within the array pointed to by s. As all boundschecked functions, wprintf_s
, wfprintf_s
, and wsprintf_s
are only guaranteed to be available if __STDC_LIB_EXT1__
is defined by the implementation and if the user defines __STDC_WANT_LIB_EXT1__
to the integer constant 1
before including <stdio.h>
.
Parameters
stream    output file stream to write to 
buffer    pointer to a wide character string to write to 
bufsz    up to bufsz1 wide characters may be written, plus the null terminator 
format    pointer to a nullterminated wide string specifying how to interpret the data. The format string consists of ordinary wide characters (except % ), which are copied unchanged into the output stream, and conversion specifications. Each conversion specification has the following format:
 introductory
% character
 (optional) one or more flags that modify the behavior of the conversion:

 : the result of the conversion is leftjustified within the field (by default it is rightjustified)

+ : the sign of signed conversions is always prepended to the result of the conversion (by default the result is preceded by minus only when it is negative)
 space: if the result of a signed conversion does not start with a sign character, or is empty, space is prepended to the result. It is ignored if
+ flag is present.

# : alternative form of the conversion is performed. See the table below for exact effects otherwise the behavior is undefined.

0 : for integer and floating point number conversions, leading zeros are used to pad the field instead of space characters. For integer numbers it is ignored if the precision is explicitly specified. For other conversions using this flag results in undefined behavior. It is ignored if  flag is present.
 (optional) integer value or
* that specifies minimum field width. The result is padded with space characters (by default), if required, on the left when rightjustified, or on the right if leftjustified. In the case when * is used, the width is specified by an additional argument of type int . If the value of the argument is negative, it results with the  flag specified and positive field width. (Note: This is the minimum width: The value is never truncated.)
 (optional)
. followed by integer number or * , or neither that specifies precision of the conversion. In the case when * is used, the precision is specified by an additional argument of type int . If the value of this argument is negative, it is ignored. If neither a number nor * is used, the precision is taken as zero. See the table below for exact effects of precision.
 (optional) length modifier that specifies the size of the argument
 conversion format specifier
The following format specifiers are available:
Conversion specifier  Explanation  Argument type 
length modifier  hh (C99).
 h  (none)  l  ll (C99).
 j (C99).
 z (C99).
 t (C99).
 L 
%  writes literal % . The full conversion specification must be %% .  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 
c  writes a single character. The argument is first converted to wchar_t as if by calling btowc . If the l modifier is used, the wint_t argument is first converted to wchar_t .
 N/A  N/A  int  wint_t  N/A  N/A  N/A  N/A  N/A 
s  writes a character string The argument must be a pointer to the initial element of a character array containing a multibyte character sequence beginning in the initial shift state, which is converted to wide character array as if by a call to mbrtowc with zeroinitialized conversion state. Precision specifies the maximum number of wide characters to be written. If Precision is not specified, writes every wide characters up to and not including the first null terminator. If the l specifier is used, the argument must be a pointer to the initial element of an array of wchar_t .
 N/A  N/A  char*  wchar_t*  N/A  N/A  N/A  N/A  N/A 
d i  converts a signed integer into decimal representation []dddd. Precision specifies the minimum number of digits to appear. The default precision is 1 . If both the converted value and the precision are 0 the conversion results in no characters.
 signed char  short  int  long  long long     N/A 
o  converts a unsigned integer into octal representation oooo. Precision specifies the minimum number of digits to appear. The default precision is 1 . If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation precision is increased if necessary, to write one leading zero. In that case if both the converted value and the precision are 0 , single 0 is written.
 unsigned char  unsigned short  unsigned int  unsigned long  unsigned long long     N/A 
x X  converts an unsigned integer into hexadecimal representation hhhh. For the x conversion letters abcdef are used. For the X conversion letters ABCDEF are used. Precision specifies the minimum number of digits to appear. The default precision is 1 . If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation 0x or 0X is prefixed to results if the converted value is nonzero.
 N/A 
u  converts an unsigned integer into decimal representation dddd. Precision specifies the minimum number of digits to appear. The default precision is 1 . If both the converted value and the precision are 0 the conversion results in no characters.
 N/A 
f F  converts floatingpoint number to the decimal notation in the style []ddd.ddd. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6 . In the alternative implementation decimal point character is written even if no digits follow it. For infinity and notanumber conversion style see notes.
 N/A  N/A  double 
double (C99)
 N/A  N/A  N/A  N/A  long double 
e E  converts floatingpoint number to the decimal exponent notation. For the e conversion style []d.ddde ±dd is used. For the E conversion style []d.dddE ±dd is used. The exponent contains at least two digits, more digits are used only if necessary. If the value is 0 , the exponent is also 0 . Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6 . In the alternative implementation decimal point character is written even if no digits follow it. For infinity and notanumber conversion style see notes.
 N/A  N/A  N/A  N/A  N/A  N/A 
a A (C99).
 converts floatingpoint number to the hexadecimal exponent notation. For the a conversion style []0x h.hhhp ±d is used. For the A conversion style []0X h.hhhP ±d is used. The first hexadecimal digit is 0 if the argument is not a normalized floating point value. If the value is 0 , the exponent is also 0 . Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is sufficient for exact representation of the value. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and notanumber conversion style see notes.
 N/A  N/A  N/A  N/A  N/A  N/A 
g G  converts floatingpoint number to decimal or decimal exponent notation depending on the value and the precision. For the g conversion style conversion with style e or f will be performed. For the G conversion style conversion with style E or F will be performed. Let P equal the precision if nonzero, 6 if the precision is not specified, or 1 if the precision is 0 . Then, if a conversion with style E would have an exponent of X :
 if P > X ≥ −4, the conversion is with style
f or F and precision P − 1 − X.
 otherwise, the conversion is with style
e or E and precision P − 1.
Unless alternative representation is requested the trailing zeros are removed, also the decimal point character is removed if no fractional part is left. For infinity and notanumber conversion style see notes.
 N/A  N/A  N/A  N/A  N/A  N/A 
n  returns the number of characters written so far by this call to the function. The result is written to the value pointed to by the argument. The specification may not contain any flag, field width, or precision.
 signed char*  short*  int*  long*  long long*     N/A 
p  writes an implementation defined character sequence defining a pointer.  N/A  N/A  void*  N/A  N/A  N/A  N/A  N/A  N/A 
The floating point conversion functions convert infinity to inf or infinity . Which one is used is implementation defined.
Notanumber is converted to nan or nan(char_sequence) . Which one is used is implementation defined.
The conversions F , E , G , A output INF , INFINITY , NAN instead.
Even though %c expects int argument, it is safe to pass a char because of the integer promotion that takes place when a variadic function is called.
The correct conversion specifications for the fixedwidth character types (int8_t , etc) are defined in the header <inttypes.h> (although PRIdMAX , PRIuMAX , etc is synonymous with %jd , %ju , etc).
The memorywriting conversion specifier %n is a common target of security exploits where format strings depend on user input and is not supported by the boundschecked printf_s family of functions.
There is a sequence point after the action of each conversion specifier; this permits storing multiple %n results in the same variable or, as an edge case, printing a string modified by an earlier %n within the same call.
If a conversion specification is invalid, the behavior is undefined.

...    arguments specifying data to print 
Return value
1,2) Number of wide characters written if successful or negative value if an error occurred.
3) Number of wide characters written (not counting the terminating null wide character) if successful or negative value if an encoding error occurred or if the number of characters to be generated was equal or greater than size
(including when size
is zero).
4,5) Number of wide characters written if successful or negative value if an error occurred.
6) Number of wide characters (not counting the terminating null) that were written to buffer
. Returns a negative value on encoding errors and on overflow. Returns zero on all other errors.
7) Number of wide characters (not counting the terminating null) that would have been written to buffer
had bufsz
been sufficiently large, or a negative value if an error occurs. (meaning, write was successful and complete only if the return is nonnegative and less than bufsz
)
Notes
While narrow strings provide snprintf
, which makes it possible to determine the required output buffer size, there is no equivalent for wide strings (until C11's snwprintf_s), and in order to determine the buffer size, the program may need to call swprintf
, check the result value, and reallocate a larger buffer, trying again until successful.
snwprintf_s
, unlike swprintf_s
, will truncate the result to fit within the array pointed to by buffer
, even though truncation is treated as an error by most boundschecked functions.
Example
#include <locale.h>
#include <wchar.h>
int main(void)
{
char narrow_str[] = "z\u00df\u6c34\U0001f34c";
// or "zß水🍌"
// or "\x7a\xc3\x9f\xe6\xb0\xb4\xf0\x9f\x8d\x8c";
wchar_t warr[29]; // the expected string is 28 characters plus 1 null terminator
setlocale(LC_ALL, "en_US.utf8");
swprintf(warr, sizeof warr/sizeof *warr,
L"Converted from UTF8: '%s'", narrow_str);
wprintf(L"%ls\n", warr);
}
Output:
Converted from UTF8: 'zß水🍌'
References
 C11 standard (ISO/IEC 9899:2011):
 7.29.2.1 The fwprintf function (p: 403410)
 7.29.2.3 The swprintf function (p: 416)
 7.29.2.11 The wprintf function (p: 421)
 K.3.9.1.1 The fwprintf_s function (p: 628)
 K.3.9.1.4 The swprintf_s function (p: 630631)
 K.3.9.1.13 The wprintf_s function (p: 637638)
 C99 standard (ISO/IEC 9899:1999):
 7.24.2.1 The fwprintf function (p: 349356)
 7.24.2.3 The swprintf function (p: 362)
 7.24.2.11 The wprintf function (p: 366)
See also
(C99)(C11)(C11)(C11)(C11)  prints formatted output to stdout , a file stream or a buffer (function) 
(C95)(C95)(C95)(C11)(C11)(C11)(C11)  prints formatted wide character output to stdout , a file stream or a buffer using variable argument list (function) 
(C95)  writes a wide string to a file stream (function) 
C++ documentation for wprintf, fwprintf, swprintf 