The 64-bit unsigned integer type.

However, please note that examples are shared between primitive integer types. So it's normal if you see usage of types like `u8`

in there.

`impl u64`

[src]
`const fn min_value() -> u64`

[src]
Returns the smallest value that can be represented by this integer type.

assert_eq!(u8::min_value(), 0);

`const fn max_value() -> u64`

[src]
Returns the largest value that can be represented by this integer type.

assert_eq!(u8::max_value(), 255);

`fn from_str_radix(src: &str, radix: u32) -> Result<u64, ParseIntError>`

[src]
Converts a string slice in a given base to an integer.

Leading and trailing whitespace represent an error.

Basic usage:

assert_eq!(u32::from_str_radix("A", 16), Ok(10));

`fn count_ones(self) -> u32`

[src]
Returns the number of ones in the binary representation of `self`

.

Basic usage:

let n = 0b01001100u8; assert_eq!(n.count_ones(), 3);

`fn count_zeros(self) -> u32`

[src]
Returns the number of zeros in the binary representation of `self`

.

Basic usage:

let n = 0b01001100u8; assert_eq!(n.count_zeros(), 5);

`fn leading_zeros(self) -> u32`

[src]
Returns the number of leading zeros in the binary representation of `self`

.

Basic usage:

let n = 0b0101000u16; assert_eq!(n.leading_zeros(), 10);

`fn trailing_zeros(self) -> u32`

[src]
Returns the number of trailing zeros in the binary representation of `self`

.

Basic usage:

let n = 0b0101000u16; assert_eq!(n.trailing_zeros(), 3);

`fn rotate_left(self, n: u32) -> u64`

[src]
Shifts the bits to the left by a specified amount, `n`

, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as `<<`

!

Basic usage:

let n = 0x0123456789ABCDEFu64; let m = 0x3456789ABCDEF012u64; assert_eq!(n.rotate_left(12), m);

`fn rotate_right(self, n: u32) -> u64`

[src]
Shifts the bits to the right by a specified amount, `n`

, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as `>>`

!

Basic usage:

let n = 0x0123456789ABCDEFu64; let m = 0xDEF0123456789ABCu64; assert_eq!(n.rotate_right(12), m);

`fn swap_bytes(self) -> u64`

[src]
Reverses the byte order of the integer.

Basic usage:

let n = 0x0123456789ABCDEFu64; let m = 0xEFCDAB8967452301u64; assert_eq!(n.swap_bytes(), m);

`fn from_be(x: u64) -> u64`

[src]
Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Basic usage:

let n = 0x0123456789ABCDEFu64; if cfg!(target_endian = "big") { assert_eq!(u64::from_be(n), n) } else { assert_eq!(u64::from_be(n), n.swap_bytes()) }

`fn from_le(x: u64) -> u64`

[src]
Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Basic usage:

let n = 0x0123456789ABCDEFu64; if cfg!(target_endian = "little") { assert_eq!(u64::from_le(n), n) } else { assert_eq!(u64::from_le(n), n.swap_bytes()) }

`fn to_be(self) -> u64`

[src]
Converts `self`

to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Basic usage:

let n = 0x0123456789ABCDEFu64; if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }

`fn to_le(self) -> u64`

[src]
Converts `self`

to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Basic usage:

let n = 0x0123456789ABCDEFu64; if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }

`fn checked_add(self, other: u64) -> Option<u64>`

[src]
Checked integer addition. Computes `self + other`

, returning `None`

if overflow occurred.

Basic usage:

assert_eq!(5u16.checked_add(65530), Some(65535)); assert_eq!(6u16.checked_add(65530), None);

`fn checked_sub(self, other: u64) -> Option<u64>`

[src]
Checked integer subtraction. Computes `self - other`

, returning `None`

if underflow occurred.

Basic usage:

assert_eq!(1u8.checked_sub(1), Some(0)); assert_eq!(0u8.checked_sub(1), None);

`fn checked_mul(self, other: u64) -> Option<u64>`

[src]
Checked integer multiplication. Computes `self * other`

, returning `None`

if underflow or overflow occurred.

Basic usage:

assert_eq!(5u8.checked_mul(51), Some(255)); assert_eq!(5u8.checked_mul(52), None);

`fn checked_div(self, other: u64) -> Option<u64>`

[src]
Checked integer division. Computes `self / other`

, returning `None`

if `other == 0`

or the operation results in underflow or overflow.

Basic usage:

assert_eq!(128u8.checked_div(2), Some(64)); assert_eq!(1u8.checked_div(0), None);

`fn checked_rem(self, other: u64) -> Option<u64>`

1.7.0

[src]
Checked integer remainder. Computes `self % other`

, returning `None`

if `other == 0`

or the operation results in underflow or overflow.

Basic usage:

assert_eq!(5u32.checked_rem(2), Some(1)); assert_eq!(5u32.checked_rem(0), None);

`fn checked_neg(self) -> Option<u64>`

1.7.0

[src]
Checked negation. Computes `-self`

, returning `None`

unless `self == 0`

.

Note that negating any positive integer will overflow.

Basic usage:

assert_eq!(0u32.checked_neg(), Some(0)); assert_eq!(1u32.checked_neg(), None);

`fn checked_shl(self, rhs: u32) -> Option<u64>`

1.7.0

[src]
Checked shift left. Computes `self << rhs`

, returning `None`

if `rhs`

is larger than or equal to the number of bits in `self`

.

Basic usage:

assert_eq!(0x10u32.checked_shl(4), Some(0x100)); assert_eq!(0x10u32.checked_shl(33), None);

`fn checked_shr(self, rhs: u32) -> Option<u64>`

1.7.0

[src]
Checked shift right. Computes `self >> rhs`

, returning `None`

if `rhs`

is larger than or equal to the number of bits in `self`

.

Basic usage:

assert_eq!(0x10u32.checked_shr(4), Some(0x1)); assert_eq!(0x10u32.checked_shr(33), None);

`fn saturating_add(self, other: u64) -> u64`

[src]
Saturating integer addition. Computes `self + other`

, saturating at the numeric bounds instead of overflowing.

Basic usage:

assert_eq!(100u8.saturating_add(1), 101); assert_eq!(200u8.saturating_add(127), 255);

`fn saturating_sub(self, other: u64) -> u64`

[src]
Saturating integer subtraction. Computes `self - other`

, saturating at the numeric bounds instead of overflowing.

Basic usage:

assert_eq!(100u8.saturating_sub(27), 73); assert_eq!(13u8.saturating_sub(127), 0);

`fn saturating_mul(self, other: u64) -> u64`

1.7.0

[src]
Saturating integer multiplication. Computes `self * other`

, saturating at the numeric bounds instead of overflowing.

Basic usage:

use std::u32; assert_eq!(100u32.saturating_mul(127), 12700); assert_eq!((1u32 << 23).saturating_mul(1 << 23), u32::MAX);

`fn wrapping_add(self, rhs: u64) -> u64`

[src]
Wrapping (modular) addition. Computes `self + other`

, wrapping around at the boundary of the type.

Basic usage:

assert_eq!(200u8.wrapping_add(55), 255); assert_eq!(200u8.wrapping_add(155), 99);

`fn wrapping_sub(self, rhs: u64) -> u64`

[src]
Wrapping (modular) subtraction. Computes `self - other`

, wrapping around at the boundary of the type.

Basic usage:

assert_eq!(100u8.wrapping_sub(100), 0); assert_eq!(100u8.wrapping_sub(155), 201);

`fn wrapping_mul(self, rhs: u64) -> u64`

[src]
Wrapping (modular) multiplication. Computes `self * other`

, wrapping around at the boundary of the type.

Basic usage:

assert_eq!(10u8.wrapping_mul(12), 120); assert_eq!(25u8.wrapping_mul(12), 44);

`fn wrapping_div(self, rhs: u64) -> u64`

1.2.0

[src]
Wrapping (modular) division. Computes `self / other`

. Wrapped division on unsigned types is just normal division. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Basic usage:

assert_eq!(100u8.wrapping_div(10), 10);

`fn wrapping_rem(self, rhs: u64) -> u64`

1.2.0

[src]
Wrapping (modular) remainder. Computes `self % other`

. Wrapped remainder calculation on unsigned types is just the regular remainder calculation. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Basic usage:

assert_eq!(100u8.wrapping_rem(10), 0);

`fn wrapping_neg(self) -> u64`

1.2.0

[src]
Wrapping (modular) negation. Computes `-self`

, wrapping around at the boundary of the type.

Since unsigned types do not have negative equivalents all applications of this function will wrap (except for `-0`

). For values smaller than the corresponding signed type's maximum the result is the same as casting the corresponding signed value. Any larger values are equivalent to `MAX + 1 - (val - MAX - 1)`

where `MAX`

is the corresponding signed type's maximum.

Basic usage:

assert_eq!(100u8.wrapping_neg(), 156); assert_eq!(0u8.wrapping_neg(), 0); assert_eq!(180u8.wrapping_neg(), 76); assert_eq!(180u8.wrapping_neg(), (127 + 1) - (180u8 - (127 + 1)));

`fn wrapping_shl(self, rhs: u32) -> u64`

1.2.0

[src]
Panic-free bitwise shift-left; yields `self << mask(rhs)`

, where `mask`

removes any high-order bits of `rhs`

that would cause the shift to exceed the bitwidth of the type.

Note that this is *not* the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a `rotate_left`

function, which may be what you want instead.

Basic usage:

assert_eq!(1u8.wrapping_shl(7), 128); assert_eq!(1u8.wrapping_shl(8), 1);

`fn wrapping_shr(self, rhs: u32) -> u64`

1.2.0

[src]
Panic-free bitwise shift-right; yields `self >> mask(rhs)`

, where `mask`

removes any high-order bits of `rhs`

that would cause the shift to exceed the bitwidth of the type.

Note that this is *not* the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a `rotate_right`

function, which may be what you want instead.

Basic usage:

assert_eq!(128u8.wrapping_shr(7), 1); assert_eq!(128u8.wrapping_shr(8), 128);

`fn overflowing_add(self, rhs: u64) -> (u64, bool)`

1.7.0

[src]
Calculates `self`

+ `rhs`

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Basic usage

use std::u32; assert_eq!(5u32.overflowing_add(2), (7, false)); assert_eq!(u32::MAX.overflowing_add(1), (0, true));

`fn overflowing_sub(self, rhs: u64) -> (u64, bool)`

1.7.0

[src]
Calculates `self`

- `rhs`

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Basic usage

use std::u32; assert_eq!(5u32.overflowing_sub(2), (3, false)); assert_eq!(0u32.overflowing_sub(1), (u32::MAX, true));

`fn overflowing_mul(self, rhs: u64) -> (u64, bool)`

1.7.0

[src]
Calculates the multiplication of `self`

and `rhs`

.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Basic usage

assert_eq!(5u32.overflowing_mul(2), (10, false)); assert_eq!(1_000_000_000u32.overflowing_mul(10), (1410065408, true));

`fn overflowing_div(self, rhs: u64) -> (u64, bool)`

1.7.0

[src]
Calculates the divisor when `self`

is divided by `rhs`

.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always `false`

.

This function will panic if `rhs`

is 0.

Basic usage

assert_eq!(5u32.overflowing_div(2), (2, false));

`fn overflowing_rem(self, rhs: u64) -> (u64, bool)`

1.7.0

[src]
Calculates the remainder when `self`

is divided by `rhs`

.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always `false`

.

This function will panic if `rhs`

is 0.

Basic usage

assert_eq!(5u32.overflowing_rem(2), (1, false));

`fn overflowing_neg(self) -> (u64, bool)`

1.7.0

[src]
Negates self in an overflowing fashion.

Returns `!self + 1`

using wrapping operations to return the value that represents the negation of this unsigned value. Note that for positive unsigned values overflow always occurs, but negating 0 does not overflow.

Basic usage

assert_eq!(0u32.overflowing_neg(), (0, false)); assert_eq!(2u32.overflowing_neg(), (-2i32 as u32, true));

`fn overflowing_shl(self, rhs: u32) -> (u64, bool)`

1.7.0

[src]
Shifts self left by `rhs`

bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Basic usage

assert_eq!(0x10u32.overflowing_shl(4), (0x100, false)); assert_eq!(0x10u32.overflowing_shl(36), (0x100, true));

`fn overflowing_shr(self, rhs: u32) -> (u64, bool)`

1.7.0

[src]
Shifts self right by `rhs`

bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Basic usage

assert_eq!(0x10u32.overflowing_shr(4), (0x1, false)); assert_eq!(0x10u32.overflowing_shr(36), (0x1, true));

`fn pow(self, exp: u32) -> u64`

[src]
Raises self to the power of `exp`

, using exponentiation by squaring.

Basic usage:

assert_eq!(2u32.pow(4), 16);

`fn is_power_of_two(self) -> bool`

[src]
Returns `true`

if and only if `self == 2^k`

for some `k`

.

Basic usage:

assert!(16u8.is_power_of_two()); assert!(!10u8.is_power_of_two());

`fn next_power_of_two(self) -> u64`

[src]
Returns the smallest power of two greater than or equal to `self`

.

When return value overflows (i.e. `self > (1 << (N-1))`

for type `uN`

), it panics in debug mode and return value is wrapped to 0 in release mode (the only situation in which method can return 0).

Basic usage:

assert_eq!(2u8.next_power_of_two(), 2); assert_eq!(3u8.next_power_of_two(), 4);

`fn checked_next_power_of_two(self) -> Option<u64>`

[src]
Returns the smallest power of two greater than or equal to `n`

. If the next power of two is greater than the type's maximum value, `None`

is returned, otherwise the power of two is wrapped in `Some`

.

Basic usage:

assert_eq!(2u8.checked_next_power_of_two(), Some(2)); assert_eq!(3u8.checked_next_power_of_two(), Some(4)); assert_eq!(200u8.checked_next_power_of_two(), None);

`impl Default for u64`

[src]
`fn default() -> u64`

[src]
Returns the default value of `0`

`impl PartialOrd<u64> for u64`

[src]
`fn partial_cmp(&self, other: &u64) -> Option<Ordering>`

[src]
This method returns an ordering between `self`

and `other`

values if one exists. Read more

`fn lt(&self, other: &u64) -> bool`

[src]
This method tests less than (for `self`

and `other`

) and is used by the `<`

operator. Read more

`fn le(&self, other: &u64) -> bool`

[src]
This method tests less than or equal to (for `self`

and `other`

) and is used by the `<=`

operator. Read more

`fn ge(&self, other: &u64) -> bool`

[src]
This method tests greater than or equal to (for `self`

and `other`

) and is used by the `>=`

operator. Read more

`fn gt(&self, other: &u64) -> bool`

[src]
This method tests greater than (for `self`

and `other`

) and is used by the `>`

operator. Read more

`impl BitXorAssign<u64> for u64`

1.8.0

[src]
`fn bitxor_assign(&mut self, other: u64)`

[src]
Performs the `^=`

operation.

`impl<'a> BitXorAssign<&'a u64> for u64`

1.22.0

[src]
`fn bitxor_assign(&mut self, other: &'a u64)`

[src]
Performs the `^=`

operation.

`impl BitAndAssign<u64> for u64`

1.8.0

[src]
`fn bitand_assign(&mut self, other: u64)`

[src]
Performs the `&=`

operation.

`impl<'a> BitAndAssign<&'a u64> for u64`

1.22.0

[src]
`fn bitand_assign(&mut self, other: &'a u64)`

[src]
Performs the `&=`

operation.

`impl Eq for u64`

[src]
`impl Zeroable for u64`

[src]
`fn is_zero(&self) -> bool`

[src]
ðŸ”¬ This is a nightly-only experimental API. (nonzero #27730)needs an RFC to flesh out the design

`impl<'a> BitOr<&'a u64> for u64`

[src]
`type Output = <u64 as BitOr<u64>>::Output`

The resulting type after applying the `|`

operator.

`fn bitor(self, other: &'a u64) -> <u64 as BitOr<u64>>::Output`

[src]
Performs the `|`

operation.

`impl<'a, 'b> BitOr<&'a u64> for &'b u64`

[src]
`type Output = <u64 as BitOr<u64>>::Output`

The resulting type after applying the `|`

operator.

`fn bitor(self, other: &'a u64) -> <u64 as BitOr<u64>>::Output`

[src]
Performs the `|`

operation.

`impl<'a> BitOr<u64> for &'a u64`

[src]
`type Output = <u64 as BitOr<u64>>::Output`

The resulting type after applying the `|`

operator.

`fn bitor(self, other: u64) -> <u64 as BitOr<u64>>::Output`

[src]
Performs the `|`

operation.

`impl BitOr<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `|`

operator.

`fn bitor(self, rhs: u64) -> u64`

[src]
Performs the `|`

operation.

`impl From<u32> for u64`

1.5.0

[src]
`fn from(small: u32) -> u64`

[src]
Performs the conversion.

`impl From<u16> for u64`

1.5.0

[src]
`fn from(small: u16) -> u64`

[src]
Performs the conversion.

`impl From<u8> for u64`

1.5.0

[src]
`fn from(small: u8) -> u64`

[src]
Performs the conversion.

`impl RemAssign<u64> for u64`

1.8.0

[src]
`fn rem_assign(&mut self, other: u64)`

[src]
Performs the `%=`

operation.

`impl<'a> RemAssign<&'a u64> for u64`

1.22.0

[src]
`fn rem_assign(&mut self, other: &'a u64)`

[src]
Performs the `%=`

operation.

`impl<'a> MulAssign<&'a u64> for u64`

1.22.0

[src]
`fn mul_assign(&mut self, other: &'a u64)`

[src]
Performs the `*=`

operation.

`impl MulAssign<u64> for u64`

1.8.0

[src]
`fn mul_assign(&mut self, other: u64)`

[src]
Performs the `*=`

operation.

`impl AddAssign<u64> for u64`

1.8.0

[src]
`fn add_assign(&mut self, other: u64)`

[src]
Performs the `+=`

operation.

`impl<'a> AddAssign<&'a u64> for u64`

1.22.0

[src]
`fn add_assign(&mut self, other: &'a u64)`

[src]
Performs the `+=`

operation.

`impl Hash for u64`

[src]
`fn hash<H>(&self, state: &mut H) where`

Â Â Â Â H: Hasher,Â

[src]
Feeds this value into the given [`Hasher`

]. Read more

`fn hash_slice<H>(data: &[u64], state: &mut H) where`

Â Â Â Â H: Hasher,Â

[src]
Feeds a slice of this type into the given [`Hasher`

]. Read more

`impl<'a> ShrAssign<&'a i8> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a i8)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a i128> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a i128)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<u8> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: u8)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<i128> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: i128)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<i16> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: i16)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a i16> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a i16)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<u16> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: u16)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a i64> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a i64)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a i32> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a i32)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a u128> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a u128)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<u32> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: u32)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a usize> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a usize)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<u64> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: u64)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a isize> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a isize)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a u32> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a u32)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a u8> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a u8)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<usize> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: usize)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<i64> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: i64)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a u16> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a u16)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<isize> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: isize)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<i8> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: i8)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<i32> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: i32)`

[src]
Performs the `>>=`

operation.

`impl ShrAssign<u128> for u64`

1.8.0

[src]
`fn shr_assign(&mut self, other: u128)`

[src]
Performs the `>>=`

operation.

`impl<'a> ShrAssign<&'a u64> for u64`

1.22.0

[src]
`fn shr_assign(&mut self, other: &'a u64)`

[src]
Performs the `>>=`

operation.

`impl Step for u64`

[src]
`fn steps_between(start: &u64, end: &u64) -> Option<usize>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (step_trait #42168)likely to be replaced by finer-grained traits

Returns the number of steps between two step objects. The count is inclusive of `start`

and exclusive of `end`

. Read more

`fn add_usize(&self, n: usize) -> Option<u64>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (step_trait #42168)likely to be replaced by finer-grained traits

Add an usize, returning None on overflow

`fn replace_one(&mut self) -> u64`

[src]
ðŸ”¬ This is a nightly-only experimental API. (step_trait #42168)likely to be replaced by finer-grained traits

Replaces this step with `1`

, returning itself

`fn replace_zero(&mut self) -> u64`

[src]
Replaces this step with `0`

, returning itself

`fn add_one(&self) -> u64`

[src]
Adds one to this step, returning the result

`fn sub_one(&self) -> u64`

[src]
Subtracts one to this step, returning the result

`impl<'a, 'b> Sub<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Sub<u64>>::Output`

The resulting type after applying the `-`

operator.

`fn sub(self, other: &'a u64) -> <u64 as Sub<u64>>::Output`

[src]
Performs the `-`

operation.

`impl Sub<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `-`

operator.

`fn sub(self, other: u64) -> u64`

[src]
Performs the `-`

operation.

`impl<'a> Sub<&'a u64> for u64`

[src]
`type Output = <u64 as Sub<u64>>::Output`

The resulting type after applying the `-`

operator.

`fn sub(self, other: &'a u64) -> <u64 as Sub<u64>>::Output`

[src]
Performs the `-`

operation.

`impl<'a> Sub<u64> for &'a u64`

[src]
`type Output = <u64 as Sub<u64>>::Output`

The resulting type after applying the `-`

operator.

`fn sub(self, other: u64) -> <u64 as Sub<u64>>::Output`

[src]
Performs the `-`

operation.

`impl Shr<i64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i64) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<u64> for &'a u64`

[src]
`type Output = <u64 as Shr<u64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u64) -> <u64 as Shr<u64>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<u8> for &'a u64`

[src]
`type Output = <u64 as Shr<u8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u8) -> <u64 as Shr<u8>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u64) -> u64`

[src]
Performs the `>>`

operation.

`impl Shr<u128> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u128) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a u128> for &'b u64`

[src]
`type Output = <u64 as Shr<u128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u128) -> <u64 as Shr<u128>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a i128> for &'b u64`

[src]
`type Output = <u64 as Shr<i128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i128) -> <u64 as Shr<i128>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a u64> for u64`

[src]
`type Output = <u64 as Shr<u64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u64) -> <u64 as Shr<u64>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<u16> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u16) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a u16> for u64`

[src]
`type Output = <u64 as Shr<u16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u16) -> <u64 as Shr<u16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a i64> for u64`

[src]
`type Output = <u64 as Shr<i64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i64) -> <u64 as Shr<i64>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<i16> for &'a u64`

[src]
`type Output = <u64 as Shr<i16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i16) -> <u64 as Shr<i16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a usize> for &'b u64`

[src]
`type Output = <u64 as Shr<usize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a usize) -> <u64 as Shr<usize>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<u16> for &'a u64`

[src]
`type Output = <u64 as Shr<u16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u16) -> <u64 as Shr<u16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a u8> for &'b u64`

[src]
`type Output = <u64 as Shr<u8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u8) -> <u64 as Shr<u8>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<i64> for &'a u64`

[src]
`type Output = <u64 as Shr<i64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i64) -> <u64 as Shr<i64>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<i8> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i8) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<i128> for &'a u64`

[src]
`type Output = <u64 as Shr<i128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i128) -> <u64 as Shr<i128>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<i128> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i128) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<i32> for &'a u64`

[src]
`type Output = <u64 as Shr<i32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i32) -> <u64 as Shr<i32>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<i16> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i16) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Shr<u64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u64) -> <u64 as Shr<u64>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a u128> for u64`

[src]
`type Output = <u64 as Shr<u128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u128) -> <u64 as Shr<u128>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a isize> for &'b u64`

[src]
`type Output = <u64 as Shr<isize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a isize) -> <u64 as Shr<isize>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a i16> for u64`

[src]
`type Output = <u64 as Shr<i16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i16) -> <u64 as Shr<i16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a u8> for u64`

[src]
`type Output = <u64 as Shr<u8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u8) -> <u64 as Shr<u8>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a usize> for u64`

[src]
`type Output = <u64 as Shr<usize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a usize) -> <u64 as Shr<usize>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<i32> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i32) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a u16> for &'b u64`

[src]
`type Output = <u64 as Shr<u16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u16) -> <u64 as Shr<u16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a u32> for u64`

[src]
`type Output = <u64 as Shr<u32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u32) -> <u64 as Shr<u32>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a isize> for u64`

[src]
`type Output = <u64 as Shr<isize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a isize) -> <u64 as Shr<isize>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a i16> for &'b u64`

[src]
`type Output = <u64 as Shr<i16>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i16) -> <u64 as Shr<i16>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a i128> for u64`

[src]
`type Output = <u64 as Shr<i128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i128) -> <u64 as Shr<i128>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<usize> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: usize) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a u32> for &'b u64`

[src]
`type Output = <u64 as Shr<u32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a u32) -> <u64 as Shr<u32>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<i8> for &'a u64`

[src]
`type Output = <u64 as Shr<i8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: i8) -> <u64 as Shr<i8>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a i32> for u64`

[src]
`type Output = <u64 as Shr<i32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i32) -> <u64 as Shr<i32>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<usize> for &'a u64`

[src]
`type Output = <u64 as Shr<usize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: usize) -> <u64 as Shr<usize>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<u128> for &'a u64`

[src]
`type Output = <u64 as Shr<u128>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u128) -> <u64 as Shr<u128>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a i8> for &'b u64`

[src]
`type Output = <u64 as Shr<i8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i8) -> <u64 as Shr<i8>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<isize> for &'a u64`

[src]
`type Output = <u64 as Shr<isize>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: isize) -> <u64 as Shr<isize>>::Output`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<u32> for &'a u64`

[src]
`type Output = <u64 as Shr<u32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u32) -> <u64 as Shr<u32>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<u8> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u8) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a i32> for &'b u64`

[src]
`type Output = <u64 as Shr<i32>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i32) -> <u64 as Shr<i32>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<u32> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: u32) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a, 'b> Shr<&'a i64> for &'b u64`

[src]
`type Output = <u64 as Shr<i64>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i64) -> <u64 as Shr<i64>>::Output`

[src]
Performs the `>>`

operation.

`impl Shr<isize> for u64`

[src]
`type Output = u64`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: isize) -> u64`

[src]
Performs the `>>`

operation.

`impl<'a> Shr<&'a i8> for u64`

[src]
`type Output = <u64 as Shr<i8>>::Output`

The resulting type after applying the `>>`

operator.

`fn shr(self, other: &'a i8) -> <u64 as Shr<i8>>::Output`

[src]
Performs the `>>`

operation.

`impl LowerHex for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter.

`impl Display for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter. Read more

`impl<'a, 'b> Rem<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Rem<u64>>::Output`

The resulting type after applying the `%`

operator.

`fn rem(self, other: &'a u64) -> <u64 as Rem<u64>>::Output`

[src]
Performs the `%`

operation.

`impl Rem<u64> for u64`

[src]
This operation satisfies `n % d == n - (n / d) * d`

. The result has the same sign as the left operand.

`type Output = u64`

The resulting type after applying the `%`

operator.

`fn rem(self, other: u64) -> u64`

[src]
Performs the `%`

operation.

`impl<'a> Rem<&'a u64> for u64`

[src]
`type Output = <u64 as Rem<u64>>::Output`

The resulting type after applying the `%`

operator.

`fn rem(self, other: &'a u64) -> <u64 as Rem<u64>>::Output`

[src]
Performs the `%`

operation.

`impl<'a> Rem<u64> for &'a u64`

[src]
`type Output = <u64 as Rem<u64>>::Output`

The resulting type after applying the `%`

operator.

`fn rem(self, other: u64) -> <u64 as Rem<u64>>::Output`

[src]
Performs the `%`

operation.

`impl Shl<u8> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u8) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a u8> for u64`

[src]
`type Output = <u64 as Shl<u8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u8) -> <u64 as Shl<u8>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a i32> for u64`

[src]
`type Output = <u64 as Shl<i32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i32) -> <u64 as Shl<i32>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a i64> for u64`

[src]
`type Output = <u64 as Shl<i64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i64) -> <u64 as Shl<i64>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a u16> for &'b u64`

[src]
`type Output = <u64 as Shl<u16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u16) -> <u64 as Shl<u16>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a i8> for &'b u64`

[src]
`type Output = <u64 as Shl<i8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i8) -> <u64 as Shl<i8>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a i16> for u64`

[src]
`type Output = <u64 as Shl<i16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i16) -> <u64 as Shl<i16>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<u16> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u16) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<u64> for &'a u64`

[src]
`type Output = <u64 as Shl<u64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u64) -> <u64 as Shl<u64>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<u128> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u128) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a usize> for &'b u64`

[src]
`type Output = <u64 as Shl<usize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a usize) -> <u64 as Shl<usize>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<i16> for &'a u64`

[src]
`type Output = <u64 as Shl<i16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i16) -> <u64 as Shl<i16>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a isize> for u64`

[src]
`type Output = <u64 as Shl<isize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a isize) -> <u64 as Shl<isize>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a i16> for &'b u64`

[src]
`type Output = <u64 as Shl<i16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i16) -> <u64 as Shl<i16>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<u128> for &'a u64`

[src]
`type Output = <u64 as Shl<u128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u128) -> <u64 as Shl<u128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a u128> for &'b u64`

[src]
`type Output = <u64 as Shl<u128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u128) -> <u64 as Shl<u128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<isize> for &'a u64`

[src]
`type Output = <u64 as Shl<isize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: isize) -> <u64 as Shl<isize>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<i16> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i16) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a i128> for &'b u64`

[src]
`type Output = <u64 as Shl<i128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i128) -> <u64 as Shl<i128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a i32> for &'b u64`

[src]
`type Output = <u64 as Shl<i32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i32) -> <u64 as Shl<i32>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<u16> for &'a u64`

[src]
`type Output = <u64 as Shl<u16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u16) -> <u64 as Shl<u16>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a i8> for u64`

[src]
`type Output = <u64 as Shl<i8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i8) -> <u64 as Shl<i8>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<isize> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: isize) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Shl<u64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u64) -> <u64 as Shl<u64>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a u8> for &'b u64`

[src]
`type Output = <u64 as Shl<u8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u8) -> <u64 as Shl<u8>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<i32> for &'a u64`

[src]
`type Output = <u64 as Shl<i32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i32) -> <u64 as Shl<i32>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<i128> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i128) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<usize> for &'a u64`

[src]
`type Output = <u64 as Shl<usize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: usize) -> <u64 as Shl<usize>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<usize> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: usize) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a u32> for u64`

[src]
`type Output = <u64 as Shl<u32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u32) -> <u64 as Shl<u32>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<u32> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u32) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<u32> for &'a u64`

[src]
`type Output = <u64 as Shl<u32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u32) -> <u64 as Shl<u32>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a u16> for u64`

[src]
`type Output = <u64 as Shl<u16>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u16) -> <u64 as Shl<u16>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a i128> for u64`

[src]
`type Output = <u64 as Shl<i128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i128) -> <u64 as Shl<i128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a u128> for u64`

[src]
`type Output = <u64 as Shl<u128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u128) -> <u64 as Shl<u128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<i128> for &'a u64`

[src]
`type Output = <u64 as Shl<i128>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i128) -> <u64 as Shl<i128>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a isize> for &'b u64`

[src]
`type Output = <u64 as Shl<isize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a isize) -> <u64 as Shl<isize>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a i64> for &'b u64`

[src]
`type Output = <u64 as Shl<i64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a i64) -> <u64 as Shl<i64>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<i32> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i32) -> u64`

[src]
Performs the `<<`

operation.

`impl Shl<i8> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i8) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<i64> for &'a u64`

[src]
`type Output = <u64 as Shl<i64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i64) -> <u64 as Shl<i64>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a usize> for u64`

[src]
`type Output = <u64 as Shl<usize>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a usize) -> <u64 as Shl<usize>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<i8> for &'a u64`

[src]
`type Output = <u64 as Shl<i8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i8) -> <u64 as Shl<i8>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u64) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<&'a u64> for u64`

[src]
`type Output = <u64 as Shl<u64>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u64) -> <u64 as Shl<u64>>::Output`

[src]
Performs the `<<`

operation.

`impl Shl<i64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: i64) -> u64`

[src]
Performs the `<<`

operation.

`impl<'a> Shl<u8> for &'a u64`

[src]
`type Output = <u64 as Shl<u8>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: u8) -> <u64 as Shl<u8>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> Shl<&'a u32> for &'b u64`

[src]
`type Output = <u64 as Shl<u32>>::Output`

The resulting type after applying the `<<`

operator.

`fn shl(self, other: &'a u32) -> <u64 as Shl<u32>>::Output`

[src]
Performs the `<<`

operation.

`impl<'a, 'b> BitAnd<&'a u64> for &'b u64`

[src]
`type Output = <u64 as BitAnd<u64>>::Output`

The resulting type after applying the `&`

operator.

`fn bitand(self, other: &'a u64) -> <u64 as BitAnd<u64>>::Output`

[src]
Performs the `&`

operation.

`impl BitAnd<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `&`

operator.

`fn bitand(self, rhs: u64) -> u64`

[src]
Performs the `&`

operation.

`impl<'a> BitAnd<u64> for &'a u64`

[src]
`type Output = <u64 as BitAnd<u64>>::Output`

The resulting type after applying the `&`

operator.

`fn bitand(self, other: u64) -> <u64 as BitAnd<u64>>::Output`

[src]
Performs the `&`

operation.

`impl<'a> BitAnd<&'a u64> for u64`

[src]
`type Output = <u64 as BitAnd<u64>>::Output`

The resulting type after applying the `&`

operator.

`fn bitand(self, other: &'a u64) -> <u64 as BitAnd<u64>>::Output`

[src]
Performs the `&`

operation.

`impl Ord for u64`

[src]
`fn cmp(&self, other: &u64) -> Ordering`

[src]
This method returns an `Ordering`

between `self`

and `other`

. Read more

`fn max(self, other: Self) -> Self`

1.21.0

[src]
Compares and returns the maximum of two values. Read more

`fn min(self, other: Self) -> Self`

1.21.0

[src]
Compares and returns the minimum of two values. Read more

`impl<'a> ShlAssign<&'a u64> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a u64)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<i32> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: i32)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<i128> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: i128)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a i32> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a i32)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a u32> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a u32)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<i16> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: i16)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a i8> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a i8)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a u16> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a u16)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<u64> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: u64)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a i16> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a i16)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<i64> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: i64)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<u128> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: u128)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a isize> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a isize)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a usize> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a usize)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a u8> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a u8)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a i64> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a i64)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<u16> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: u16)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<u8> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: u8)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<isize> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: isize)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a i128> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a i128)`

[src]
Performs the `<<=`

operation.

`impl<'a> ShlAssign<&'a u128> for u64`

1.22.0

[src]
`fn shl_assign(&mut self, other: &'a u128)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<usize> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: usize)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<u32> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: u32)`

[src]
Performs the `<<=`

operation.

`impl ShlAssign<i8> for u64`

1.8.0

[src]
`fn shl_assign(&mut self, other: i8)`

[src]
Performs the `<<=`

operation.

`impl<'a> Div<u64> for &'a u64`

[src]
`type Output = <u64 as Div<u64>>::Output`

The resulting type after applying the `/`

operator.

`fn div(self, other: u64) -> <u64 as Div<u64>>::Output`

[src]
Performs the `/`

operation.

`impl<'a> Div<&'a u64> for u64`

[src]
`type Output = <u64 as Div<u64>>::Output`

The resulting type after applying the `/`

operator.

`fn div(self, other: &'a u64) -> <u64 as Div<u64>>::Output`

[src]
Performs the `/`

operation.

`impl<'a, 'b> Div<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Div<u64>>::Output`

The resulting type after applying the `/`

operator.

`fn div(self, other: &'a u64) -> <u64 as Div<u64>>::Output`

[src]
Performs the `/`

operation.

`impl Div<u64> for u64`

[src]
This operation rounds towards zero, truncating any fractional part of the exact result.

`type Output = u64`

The resulting type after applying the `/`

operator.

`fn div(self, other: u64) -> u64`

[src]
Performs the `/`

operation.

`impl<'a> BitOrAssign<&'a u64> for u64`

1.22.0

[src]
`fn bitor_assign(&mut self, other: &'a u64)`

[src]
Performs the `|=`

operation.

`impl BitOrAssign<u64> for u64`

1.8.0

[src]
`fn bitor_assign(&mut self, other: u64)`

[src]
Performs the `|=`

operation.

`impl PartialEq<u64> for u64`

[src]
`fn eq(&self, other: &u64) -> bool`

[src]
This method tests for `self`

and `other`

values to be equal, and is used by `==`

. Read more

`fn ne(&self, other: &u64) -> bool`

[src]
This method tests for `!=`

.

`impl<'a> Add<u64> for &'a u64`

[src]
`type Output = <u64 as Add<u64>>::Output`

The resulting type after applying the `+`

operator.

`fn add(self, other: u64) -> <u64 as Add<u64>>::Output`

[src]
Performs the `+`

operation.

`impl<'a> Add<&'a u64> for u64`

[src]
`type Output = <u64 as Add<u64>>::Output`

The resulting type after applying the `+`

operator.

`fn add(self, other: &'a u64) -> <u64 as Add<u64>>::Output`

[src]
Performs the `+`

operation.

`impl<'a, 'b> Add<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Add<u64>>::Output`

The resulting type after applying the `+`

operator.

`fn add(self, other: &'a u64) -> <u64 as Add<u64>>::Output`

[src]
Performs the `+`

operation.

`impl Add<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `+`

operator.

`fn add(self, other: u64) -> u64`

[src]
Performs the `+`

operation.

`impl Sum<u64> for u64`

1.12.0

[src]
`fn sum<I>(iter: I) -> u64 where`

Â Â Â Â I: Iterator<Item = u64>,Â

[src]
Method which takes an iterator and generates `Self`

from the elements by "summing up" the items. Read more

`impl<'a> Sum<&'a u64> for u64`

1.12.0

[src]
`fn sum<I>(iter: I) -> u64 where`

Â Â Â Â I: Iterator<Item = &'a u64>,Â

[src]
`Self`

from the elements by "summing up" the items. Read more

`impl UpperHex for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter.

`impl Octal for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter.

`impl DivAssign<u64> for u64`

1.8.0

[src]
`fn div_assign(&mut self, other: u64)`

[src]
Performs the `/=`

operation.

`impl<'a> DivAssign<&'a u64> for u64`

1.22.0

[src]
`fn div_assign(&mut self, other: &'a u64)`

[src]
Performs the `/=`

operation.

`impl SubAssign<u64> for u64`

1.8.0

[src]
`fn sub_assign(&mut self, other: u64)`

[src]
Performs the `-=`

operation.

`impl<'a> SubAssign<&'a u64> for u64`

1.22.0

[src]
`fn sub_assign(&mut self, other: &'a u64)`

[src]
Performs the `-=`

operation.

`impl<'a> BitXor<&'a u64> for u64`

[src]
`type Output = <u64 as BitXor<u64>>::Output`

The resulting type after applying the `^`

operator.

`fn bitxor(self, other: &'a u64) -> <u64 as BitXor<u64>>::Output`

[src]
Performs the `^`

operation.

`impl BitXor<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `^`

operator.

`fn bitxor(self, other: u64) -> u64`

[src]
Performs the `^`

operation.

`impl<'a> BitXor<u64> for &'a u64`

[src]
`type Output = <u64 as BitXor<u64>>::Output`

The resulting type after applying the `^`

operator.

`fn bitxor(self, other: u64) -> <u64 as BitXor<u64>>::Output`

[src]
Performs the `^`

operation.

`impl<'a, 'b> BitXor<&'a u64> for &'b u64`

[src]
`type Output = <u64 as BitXor<u64>>::Output`

The resulting type after applying the `^`

operator.

`fn bitxor(self, other: &'a u64) -> <u64 as BitXor<u64>>::Output`

[src]
Performs the `^`

operation.

`impl Not for u64`

[src]
`type Output = u64`

The resulting type after applying the `!`

operator.

`fn not(self) -> u64`

[src]
Performs the unary `!`

operation.

`impl<'a> Not for &'a u64`

[src]
`type Output = <u64 as Not>::Output`

The resulting type after applying the `!`

operator.

`fn not(self) -> <u64 as Not>::Output`

[src]
Performs the unary `!`

operation.

`impl<'a> Mul<&'a u64> for u64`

[src]
`type Output = <u64 as Mul<u64>>::Output`

The resulting type after applying the `*`

operator.

`fn mul(self, other: &'a u64) -> <u64 as Mul<u64>>::Output`

[src]
Performs the `*`

operation.

`impl Mul<u64> for u64`

[src]
`type Output = u64`

The resulting type after applying the `*`

operator.

`fn mul(self, other: u64) -> u64`

[src]
Performs the `*`

operation.

`impl<'a> Mul<u64> for &'a u64`

[src]
`type Output = <u64 as Mul<u64>>::Output`

The resulting type after applying the `*`

operator.

`fn mul(self, other: u64) -> <u64 as Mul<u64>>::Output`

[src]
Performs the `*`

operation.

`impl<'a, 'b> Mul<&'a u64> for &'b u64`

[src]
`type Output = <u64 as Mul<u64>>::Output`

The resulting type after applying the `*`

operator.

`fn mul(self, other: &'a u64) -> <u64 as Mul<u64>>::Output`

[src]
Performs the `*`

operation.

`impl<'a> Product<&'a u64> for u64`

1.12.0

[src]
`fn product<I>(iter: I) -> u64 where`

Â Â Â Â I: Iterator<Item = &'a u64>,Â

[src]
Method which takes an iterator and generates `Self`

from the elements by multiplying the items. Read more

`impl Product<u64> for u64`

1.12.0

[src]
`fn product<I>(iter: I) -> u64 where`

Â Â Â Â I: Iterator<Item = u64>,Â

[src]
`Self`

from the elements by multiplying the items. Read more

`impl TryFrom<u128> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: u128) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<i8> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: i8) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<i128> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: i128) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<i64> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: i64) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<isize> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: isize) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<i32> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: i32) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<i16> for u64`

[src]
`type Error = TryFromIntError`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(u: i16) -> Result<u64, TryFromIntError>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl TryFrom<usize> for u64`

[src]
`type Error = Infallible`

ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

`fn try_from(value: usize) -> Result<u64, <u64 as TryFrom<usize>>::Error>`

[src]
ðŸ”¬ This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

`impl Binary for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter.

`impl FromStr for u64`

[src]
`type Err = ParseIntError`

The associated error which can be returned from parsing.

`fn from_str(src: &str) -> Result<u64, ParseIntError>`

[src]
Parses a string `s`

to return a value of this type. Read more

`impl Debug for u64`

[src]
`fn fmt(&self, f: &mut Formatter) -> Result<(), Error>`

[src]
Formats the value using the given formatter. Read more

Â© 2010 The Rust Project Developers

Licensed under the Apache License, Version 2.0 or the MIT license, at your option.

https://doc.rust-lang.org/std/primitive.u64.html