skimage, images are simply numpy arrays, which support a variety of data types , i.e. “dtypes”. To avoid distorting image intensities (see Rescaling intensity values), we assume that images use the following dtype ranges:
|uint8||0 to 255|
|uint16||0 to 65535|
|uint32||0 to 232|
|float||-1 to 1 or 0 to 1|
|int8||-128 to 127|
|int16||-32768 to 32767|
|int32||-231 to 231 - 1|
Note that float images should be restricted to the range -1 to 1 even though the data type itself can exceed this range; all integer dtypes, on the other hand, have pixel intensities that can span the entire data type range. With a few exceptions, 64-bit (u)int images are not supported.
skimage are designed so that they accept any of these dtypes, but, for efficiency, may return an image of a different dtype (see Output types). If you need a particular dtype,
skimage provides utility functions that convert dtypes and properly rescale image intensities (see Input types). You should never use
astype on an image, because it violates these assumptions about the dtype range:
>>> from skimage import img_as_float >>> image = np.arange(0, 50, 10, dtype=np.uint8) >>> print(image.astype(np.float)) # These float values are out of range. [ 0. 10. 20. 30. 40.] >>> print(img_as_float(image)) [ 0. 0.03921569 0.07843137 0.11764706 0.15686275]
Although we aim to preserve the data range and type of input images, functions may support only a subset of these data-types. In such a case, the input will be converted to the required type (if possible), and a warning message printed to the log if a memory copy is needed. Type requirements should be noted in the docstrings.
The following utility functions in the main package are available to developers and users:
|img_as_float||Convert to 64-bit floating point.|
|img_as_ubyte||Convert to 8-bit uint.|
|img_as_uint||Convert to 16-bit uint.|
|img_as_int||Convert to 16-bit int.|
These functions convert images to the desired dtype and properly rescale their values. If conversion reduces the precision of the image, then a warning is issued:
>>> from skimage import img_as_ubyte >>> image = np.array([0, 0.5, 1], dtype=float) >>> img_as_ubyte(image) WARNING:dtype_converter:Possible precision loss when converting from float64 to uint8 array([ 0, 128, 255], dtype=uint8)
Warnings can be locally ignored with a context manager:
>>> import warnings >>> image = np.array([0, 0.5, 1], dtype=float) >>> with warnings.catch_warnings(): ... warnings.simplefilter("ignore") ... img_as_ubyte(image) array([ 0, 128, 255], dtype=uint8)
Additionally, some functions take a
preserve_range argument where a range conversion is convenient but not necessary. For example, interpolation in
transform.warp requires an image of type float, which should have a range in [0, 1]. So, by default, input images will be rescaled to this range. However, in some cases, the image values represent physical measurements, such as temperature or rainfall values, that the user does not want rescaled. With
preserve_range=True, the original range of the data will be preserved, even though the output is a float image. Users must then ensure this non-standard image is properly processed by downstream functions, which may expect an image in [0, 1].
>>> from skimage import data >>> from skimage.transform import rescale >>> image = data.coins() >>> image.dtype, image.min(), image.max(), image.shape (dtype('uint8'), 1, 252, (303, 384)) >>> rescaled = rescale(image, 0.5) >>> (rescaled.dtype, np.round(rescaled.min(), 4), ... np.round(rescaled.max(), 4), rescaled.shape) (dtype('float64'), 0.0147, 0.9456, (152, 192)) >>> rescaled = rescale(image, 0.5, preserve_range=True) >>> (rescaled.dtype, np.round(rescaled.min()), ... np.round(rescaled.max()), rescaled.shape (dtype('float64'), 4.0, 241.0, (152, 192))
The output type of a function is determined by the function author and is documented for the benefit of the user. While this requires the user to explicitly convert the output to whichever format is needed, it ensures that no unnecessary data copies take place.
A user that requires a specific type of output (e.g., for display purposes), may write:
>>> from skimage import img_as_uint >>> out = img_as_uint(sobel(image)) >>> plt.imshow(out)
It is possible that you may need to use an image created using
skimage with OpenCV or vice versa. OpenCV image data can be accessed (without copying) in NumPy (and, thus, in scikit-image). OpenCV uses BGR (instead of scikit-image’s RGB) for color images, and its dtype is uint8 by default (See Image data types and what they mean). BGR stands for Blue Green Red.
The color images in
skimage and OpenCV have 3 dimensions: width, height and color. RGB and BGR use the same color space, except the order of colors is reversed.
Note that in
scikit-image we usually refer to
columns instead of width and height (see Coordinate conventions).
The following instruction effectively reverses the order of the colors, leaving the rows and columns unaffected.
>>> image = image[:, :, ::-1]
If cv_image is an array of unsigned bytes,
skimage will understand it by default. If you prefer working with floating point images,
img_as_float() can be used to convert the image:
>>> from skimage import img_as_float >>> image = img_as_float(any_opencv_image)
The reverse can be achieved with
>>> from skimage import img_as_ubyte >>> cv_image = img_as_ubyte(any_skimage_image)
This dtype behavior allows you to string together any
skimage function without worrying about the image dtype. On the other hand, if you want to use a custom function that requires a particular dtype, you should call one of the dtype conversion functions (here,
>>> from skimage import img_as_float >>> image = img_as_float(func1(func2(image))) >>> processed_image = custom_func(image)
Better yet, you can convert the image internally and use a simplified processing pipeline:
>>> def custom_func(image): ... image = img_as_float(image) ... # do something ... >>> processed_image = custom_func(func1(func2(image)))
When possible, functions should avoid blindly stretching image intensities (e.g. rescaling a float image so that the min and max intensities are 0 and 1), since this can heavily distort an image. For example, if you’re looking for bright markers in dark images, there may be an image where no markers are present; stretching its input intensity to span the full range would make background noise look like markers.
Sometimes, however, you have images that should span the entire intensity range but do not. For example, some cameras store images with 10-, 12-, or 14-bit depth per pixel. If these images are stored in an array with dtype uint16, then the image won’t extend over the full intensity range, and thus, would appear dimmer than it should. To correct for this, you can use the
rescale_intensity function to rescale the image so that it uses the full dtype range:
>>> from skimage import exposure >>> image = exposure.rescale_intensity(img10bit, in_range=(0, 2**10 - 1))
in_range argument is set to the maximum range for a 10-bit image. By default,
rescale_intensity stretches the values of
in_range to match the range of the dtype.
rescale_intensity also accepts strings as inputs to
out_range, so the example above could also be written as:
>>> image = exposure.rescale_intensity(img10bit, in_range='uint10')
People very often represent images in signed dtypes, even though they only manipulate the positive values of the image (e.g., using only 0-127 in an int8 image). For this reason, conversion functions only spread the positive values of a signed dtype over the entire range of an unsigned dtype. In other words, negative values are clipped to 0 when converting from signed to unsigned dtypes. (Negative values are preserved when converting between signed dtypes.) To prevent this clipping behavior, you should rescale your image beforehand:
>>> image = exposure.rescale_intensity(img_int32, out_range=(0, 2**31 - 1)) >>> img_uint8 = img_as_ubyte(image)
This behavior is symmetric: The values in an unsigned dtype are spread over just the positive range of a signed dtype.
© 2011 the scikit-image team
Licensed under the BSD 3-clause License.