Note
This plugin is part of the arista.eos collection (version 2.2.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_bgp_address_family.
New in version 1.4.0: of arista.eos
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config dictionary | Configurations for BGP address family. | |||||
| address_family list / elements=dictionary | Enable address family and enter its config mode | |||||
| afi string |
| address family. | ||||
| bgp_params dictionary | BGP parameters. | |||||
| additional_paths string |
| BGP additional-paths commands | ||||
| next_hop_address_family string |
| Next-hop address-family configuration | ||||
| next_hop_unchanged boolean |
| Preserve original nexthop while advertising routes to eBGP peers. | ||||
| redistribute_internal boolean |
| Redistribute internal BGP routes. | ||||
| route string | Configure route-map for route installation. | |||||
| graceful_restart boolean |
| Enable graceful restart mode. | ||||
| neighbor list / elements=dictionary | Configure routing for a network. | |||||
| activate boolean |
| Activate neighbor in the address family. | ||||
| additional_paths string |
| BGP additional-paths commands. | ||||
| default_originate dictionary | Originate default route to this neighbor. | |||||
| always boolean |
| Always originate default route to this neighbor. | ||||
| route_map string | Route map reference. | |||||
| encapsulation dictionary | Default transport encapsulation for neighbor. Applicable for evpn address-family. | |||||
| source_interface string | Source interface to update BGP next hop address. Applicable for mpls transport. | |||||
| transport string |
| MPLS/VXLAN transport. | ||||
| graceful_restart boolean |
| Enable graceful restart mode. | ||||
| next_hop_address_family string |
| Next-hop address-family configuration | ||||
| next_hop_unchanged boolean |
| Preserve original nexthop while advertising routes to eBGP peers. | ||||
| peer string | Neighbor address/ peer-group name. | |||||
| prefix_list dictionary | Prefix list reference. | |||||
| direction string |
| Configure an inbound/outbound prefix-list. | ||||
| name string | prefix list name. | |||||
| route_map dictionary | Route map reference. | |||||
| direction string |
| Configure an inbound/outbound route-map. | ||||
| name string | Route map name. | |||||
| weight integer | Weight to assign. | |||||
| network list / elements=dictionary | configure routing for network. | |||||
| address string | network address. | |||||
| route_map string | Route map reference. | |||||
| redistribute list / elements=dictionary | Redistribute routes in to BGP. | |||||
| isis_level string |
| Applicable for isis routes. Specify isis route level. | ||||
| ospf_route string |
| ospf route options. | ||||
| protocol string |
| Routes to be redistributed. | ||||
| route_map string | Route map reference. | |||||
| route_target dictionary | Route target | |||||
| mode string |
| route import or route export. | ||||
| target string | route target | |||||
| safi string |
| Address family type for ipv4. | ||||
| vrf string | name of the VRF in which BGP will be configured. | |||||
| as_number string | Autonomous system number. | |||||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | |||||
| state string |
| The state the configuration should be left in. | ||||
Note
network_cli. See the EOS Platform Options.# Using merged
# Before state
# veos(config)#show running-config | section bgp
# veos(config)#
- name: Merge provided configuration with device configuration
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: merged
# After state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
# Module Execution:
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {},
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ],
# Using replaced:
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
#
- name: Replace
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
state: replaced
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "activate": true,
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv6",
# "redistribute ospf3 match external",
# "no redistribute isis level-2",
# "no route-target export 33:11",
# "exit",
# "exit",
# "address-family ipv6",
# "redistribute isis level-2",
# "no neighbor peer2 activate",
# "no bgp additional-paths receive",
# "exit"
# ],
# Using overridden (overriding af at global context):
# Before state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "no redistribute ospf3 match external",
# "no network 1.1.1.0/24",
# "no network 1.5.1.0/24 route-map MAP01",
# "neighbor peer2 default-originate always",
# "no neighbor 1.1.1.1 activate",
# "bgp additional-paths receive",
# "exit",
# "no address-family ipv6"
# ],
# using Overridden (overridding af in vrf context):
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
vrf: vrft
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# },
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv4",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "exit",
# " vrf vrft",
# "no address-family ipv6"
# ],
# Using Deleted:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: Delete
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
- afi: "ipv6"
state: deleted
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# Using parsed:
# parsed_bgp_address_family.cfg :
# router bgp 10
# neighbor n2 peer-group
# neighbor n2 next-hop-unchanged
# neighbor n2 maximum-routes 12000
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# redistribute ospf3 match external
# !
# address-family ipv6
# no bgp additional-paths receive
# neighbor n2 next-hop-unchanged
# redistribute isis level-2
# !
# vrf bgp_10
# ip access-group acl01
# ucmp fec threshold trigger 33 clear 22 warning-only
# !
# address-family ipv4
# route-target import 20:11
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# !
# address-family ipv6
# redistribute ospf3 match external
- name: parse configs
arista.eos.eos_bgp_address_family:
running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
state: parsed
# Module Execution:
# "parsed": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "next_hop_unchanged": true,
# "peer": "n2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv4",
# "route_target": {
# "mode": "import",
# "target": "20:11"
# },
# "vrf": "bgp_10"
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# }
# }
# Using gathered:
# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: gather configs
arista.eos.eos_bgp_address_family:
state: gathered
# Module Execution:
# "gathered": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# using rendered:
- name: Render
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: rendered
# Module Execution:
# "rendered": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ]
#
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_bgp_address_family_module.html