W3cubDocs

/Ansible

arista.eos.eos_interfaces – Interfaces resource module

Note

This plugin is part of the arista.eos collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_interfaces.

New in version 1.0.0: of arista.eos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages the interface attributes of Arista EOS interfaces.

Note

This module has a corresponding action plugin.

Parameters

Parameter		Choices/Defaults	Comments
config list / elements=dictionary			The provided configuration
	description string		Interface description
	duplex string		Interface link status. Applicable for Ethernet interfaces only. Values other than `auto` must also set speed. Ignored when speed is set above `1000`.
	enabled boolean	Choices: no yes ←	Administrative state of the interface. Set the value to `true` to administratively enable the interface or `false` to disable it.
	mode string	Choices: layer2 layer3	Manage Layer2 or Layer3 state of the interface. Applicable for Ethernet and port channel interfaces only.
	mtu integer		MTU for a specific interface. Must be an even number between 576 and 9216. Applicable for Ethernet interfaces only.
	name string / required		Full name of the interface, e.g. GigabitEthernet1.
	speed string		Interface link speed. Applicable for Ethernet interfaces only.
running_config string			This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config \| section ^interface. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string		Choices: merged ← replaced overridden deleted parsed rendered gathered	The state of the configuration after module completion.

Notes

Note

Tested against Arista EOS 4.20.10M
This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Merge provided configuration with device configuration
  arista.eos.eos_interfaces:
    config:
    - name: Ethernet1
      enabled: true
      mode: layer3
    - name: Ethernet2
      description: Configured by Ansible
      enabled: false
    state: merged

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
#    no switchport
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

# Using replaced

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Replaces device configuration of listed interfaces with provided configuration
  arista.eos.eos_interfaces:
    config:
    - name: Ethernet1
      enabled: true
    - name: Ethernet2
      description: Configured by Ansible
      enabled: false
    state: replaced

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

# Using overridden

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Overrides all device configuration with provided configuration
  arista.eos.eos_interfaces:
    config:
    - name: Ethernet1
      enabled: true
    - name: Ethernet2
      description: Configured by Ansible
      enabled: false
    state: overridden

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    ip address dhcp
# !

# Using deleted

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
#    no switchport
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Delete or return interface parameters to default settings
  arista.eos.eos_interfaces:
    config:
    - name: Ethernet1
    state: deleted

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

# Using rendered

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_interfaces:
    config:
    - name: Ethernet1
      enabled: true
      mode: layer3
    - name: Ethernet2
      description: Configured by Ansible
      enabled: false
    state: merged

# Output:
# ------------

# - "interface Ethernet1"
# - "description "Interface 1""
# - "no swithcport"
# - "interface Ethernet2"
# - "description "Configured by Ansible""
# - "shutdown"
# - "interface Management1"
# - "description "Management interface""
# - "ip address dhcp"

# Using parsed
# parsed.cfg

# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !

- name: Use parsed to convert native configs to structured data
  arista.eos.interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Output
# parsed:
#     - name: Ethernet1
#       enabled: True
#       mode: layer2
#     - name: Ethernet2
#       description: 'Configured by Ansible'
#       enabled: False
#       mode: layer2

# Using gathered:

# Existing config on the device
# -----------------------------
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !

- name: Gather interfaces facts from the device
  arista.eos.interfaces:
    state: gathered

# output
# gathered:
#      - name: Ethernet1
#        enabled: True
#        mode: layer2
#      - name: Ethernet2
#        description: 'Configured by Ansible'
#        enabled: False
#        mode: layer2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before dictionary	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['interface Ethernet2', 'shutdown', 'speed 10full']

Authors

Nathaniel Case (@qalthos)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_interfaces_module.html