W3cubDocs

/Ansible

arista.eos.eos_lacp_interfaces – LACP interfaces resource module

Note

This plugin is part of the arista.eos collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_lacp_interfaces.

New in version 1.0.0: of arista.eos

Synopsis

  • This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Arista EOS devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of LACP interfaces options.
name
string
Full name of the interface (i.e. Ethernet1).
port_priority
integer
LACP port priority for the interface. Range 1-65535.
rate
string
    Choices:
  • fast
  • normal
Rate at which PDUs are sent by LACP. At fast rate LACP is transmitted once every 1 second. At normal rate LACP is transmitted every 30 seconds after the link is bundled.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the EOS device by executing the command show running-config | section ^interfaces.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • parsed
  • rendered
  • gathered
The state of the configuration after module completion.

Notes

Note

  • Tested against Arista EOS 4.20.10M
  • This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Merge provided configuration with device configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    - name: Ethernet2
      rate: normal
    state: merged

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
#    lacp rate fast
# interface Ethernet2


# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Replace existing LACP configuration of specified interfaces with provided
    configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    state: replaced

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp rate fast
# interface Ethernet2
#    lacp rate fast


# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Override the LACP configuration of all the interfaces with provided configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    state: overridden

#
# -----------
# After state
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp rate fast
# interface Ethernet2


# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Delete LACP attributes of given interfaces (or all interfaces if none specified).
  arista.eos.eos_lacp_interfaces:
    state: deleted

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
# interface Ethernet2

# using rendered:

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    - name: Ethernet2
      rate: normal
    state: rendered

#
# -----------
# Output
# -----------
# rendered:
#   - "interface Ethernet1"
#   - "lacp rate fast"

# Using parsed:

# parsed.cfg:
#    "interface Ethernet1"
#    "lacp rate fast"
#    "interface Ethernet2"

- name: Use parsed to convert native configs to structured data
  arista.eos.eos_lacp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Output:
# parsed:
#   - name: Ethernet1
#     rate: fast
#   - name: Ethernet2
#     rate: normal

# Using gathered:
# native config:
#  veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Gather LACP facts from the device
  arista.eos.eos_lacp_interfaces:
    state: gathered

# Output:
# gathered:
#   - name: Ethernet1
#   - name: Ethernet2
#     rate: fast

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['interface Ethernet1', 'lacp rate fast']


Authors

  • Nathaniel Case (@Qalthos)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_lacp_interfaces_module.html