Note
This plugin is part of the arista.eos collection (version 2.2.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_static_routes.
New in version 1.0.0: of arista.eos
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config list / elements=dictionary | A list of configurations for static routes. | |||||
| address_families list / elements=dictionary | A dictionary specifying the address family to which the static route(s) belong. | |||||
| afi string / required |
| Specifies the top level address family indicator. | ||||
| routes list / elements=dictionary | A dictionary that specifies the static route configurations. | |||||
| dest string / required | Destination IPv4 subnet (CIDR or address-mask notation). The address format is <v4/v6 address>/<mask> or <v4/v6 address> <mask>. The mask is number in range 0-32 for IPv4 and in range 0-128 for IPv6. | |||||
| next_hops list / elements=dictionary | Details of route to be taken. | |||||
| admin_distance integer | Preference or administrative distance of route (range 1-255). | |||||
| description string | Name of the static route. | |||||
| forward_router_address string | Forwarding router's address on destination interface. | |||||
| interface string | Outgoing interface to take. For anything except 'null0', then next hop IP address should also be configured. IP address of the next hop router or null0 Null0 interface or ethernet e_num Ethernet interface or loopback l_num Loopback interface or management m_num Management interface or port-channel p_num vlan v_num vxlan vx_num Nexthop-Group Specify nexthop group name Tunnel Tunnel interface vtep Configure VXLAN Tunnel End Points | |||||
| mpls_label integer | MPLS label | |||||
| nexthop_grp string | Nexthop group | |||||
| tag integer | Route tag value (ranges from 0 to 4294967295). | |||||
| track string | Track value (range 1 - 512). Track must already be configured on the device before adding the route. | |||||
| vrf string | VRF of the destination. | |||||
| vrf string | The VRF to which the static route(s) belong. | |||||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | grep routes. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | |||||
| state string |
| The state the configuration should be left in. | ||||
Note
network_cli. See the EOS Platform Options.# Using deleted
# Before State:
# ------------
# veos(config)#show running-config | grep route
# ip route vrf testvrf 22.65.1.0/24 Null0 90 name testroute
# ipv6 route 5222:5::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Ethernet1 55
# ipv6 route vrf testvrf 2222:6::/64 Null0 90 name testroute1
# veos(config)#
- name: Delete afi
arista.eos.eos_static_routes:
config:
- vrf: testvrf
address_families:
- afi: ipv4
state: deleted
# "after": [
# {
# "address_families": [
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5222:5::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2222:6::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# },
# {
# "admin_distance": 55,
# "interface": "Ethernet1"
# },
# {
# "admin_distance": 90,
# "description": "testroute1",
# "interface": "Null0"
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ],
# "before": [
# {
# "address_families": [
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5222:5::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "22.65.1.0/24",
# "next_hops": [
# {
# "admin_distance": 90,
# "description": "testroute",
# "interface": "Null0"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2222:6::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# },
# {
# "admin_distance": 55,
# "interface": "Ethernet1"
# },
# {
# "admin_distance": 90,
# "description": "testroute1",
# "interface": "Null0"
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ],
# "changed": true,
# "commands": [
# "no ip route vrf testvrf 22.65.1.0/24 Null0 90 name testroute"
# ],
# After State
# ___________
# veos(config)#show running-config | grep route
# ipv6 route 5222:5::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Ethernet1 55
# ipv6 route vrf testvrf 2222:6::/64 Null0 90 name testroute1
#
# Using merged
# Before : [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "165.10.1.0/24",
# "next_hops": [
# {
# "admin_distance": 100,
# "interface": "Ethernet1"
# }
# ]
# },
# {
# "dest": "172.17.252.0/24",
# "next_hops": [
# {
# "nexthop_grp": "testgroup"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5001::/64",
# "next_hops": [
# {
# "admin_distance": 50,
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "130.1.122.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1",
# "tag": 50
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ]
#
# Before State
# -------------
# veos(config)#show running-config | grep "route"
# ip route 165.10.1.0/24 Ethernet1 100
# ip route 172.17.252.0/24 Nexthop-Group testgroup
# ip route vrf testvrf 130.1.122.0/24 Ethernet1 tag 50
# ipv6 route 5001::/64 Ethernet1 50
# veos(config)#
- name: Merge new static route configuration
arista.eos.eos_static_routes:
config:
- vrf: testvrf
address_families:
- afi: ipv6
routes:
- dest: 2211::0/64
next_hop:
- forward_router_address: 100:1::2
interface: Ethernet1
state: merged
# After State
# -----------
#After [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "165.10.1.0/24",
# "next_hops": [
# {
# "admin_distance": 100,
# "interface": "Ethernet1"
# }
# ]
# },
# {
# "dest": "172.17.252.0/24",
# "next_hops": [
# {
# "nexthop_grp": "testgroup"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5001::/64",
# "next_hops": [
# {
# "admin_distance": 50,
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "130.1.122.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1",
# "tag": 50
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2211::0/64",
# "next_hops": [
# {
# "aforward_router_address": 100:1::2
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ]
#
# veos(config)#show running-config | grep "route"
# ip route 165.10.1.0/24 Ethernet1 100
# ip route 172.17.252.0/24 Nexthop-Group testgroup
# ip route vrf testvrf 130.1.122.0/24 Ethernet1 tag 50
# ipv6 route 2211::/64 Ethernet1 100:1::2
# ipv6 route 5001::/64 Ethernet1 50
# veos(config)#
# Using overridden
# Before State
# -------------
# "before": [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "165.10.1.0/24",
# "next_hops": [
# {
# "admin_distance": 100,
# "interface": "Ethernet1"
# }
# ]
# },
# {
# "dest": "172.17.252.0/24",
# "next_hops": [
# {
# "nexthop_grp": "testgroup"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5001::/64",
# "next_hops": [
# {
# "admin_distance": 50,
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "130.1.122.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1",
# "tag": 50
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ]
# veos(config)#show running-config | grep "route"
# ip route 165.10.1.0/24 Ethernet1 100
# ip route 172.17.252.0/24 Nexthop-Group testgroup
# ip route vrf testvrf 130.1.122.0/24 Ethernet1 tag 50
# ipv6 route 5001::/64 Ethernet1 50
# veos(config)#
- name: Overridden static route configuration
arista.eos.eos_static_routes:
config:
- address_families:
- afi: ipv4
routes:
- dest: 10.2.2.0/24
next_hop:
- interface: Ethernet1
state: replaced
# After State
# -----------
# "after": [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "10.2.2.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ]
# }
# ]
# veos(config)#show running-config | grep "route"
# ip route 10.2.2.0/24 Ethernet1
# veos(config)#
# Using replaced
# Before State
# -------------
# ip route 10.2.2.0/24 Ethernet1
# ip route 10.2.2.0/24 64.1.1.1 label 17 33
# ip route 33.33.33.0/24 Nexthop-Group testgrp
# ip route vrf testvrf 22.65.1.0/24 Null0 90 name testroute
# ipv6 route 5222:5::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Ethernet1 55
# ipv6 route vrf testvrf 2222:6::/64 Null0 90 name testroute1
# [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "10.2.2.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1"
# },
# {
# "admin_distance": 33,
# "interface": "64.1.1.1",
# "mpls_label": 17
# }
# ]
# },
# {
# "dest": "33.33.33.0/24",
# "next_hops": [
# {
# "nexthop_grp": "testgrp"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5222:5::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "22.65.1.0/24",
# "next_hops": [
# {
# "admin_distance": 90,
# "description": "testroute",
# "interface": "Null0"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2222:6::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# },
# {
# "admin_distance": 90,
# "description": "testroute1",
# "interface": "Null0"
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ]
- name: Replace nexthop
arista.eos.eos_static_routes:
config:
- vrf: testvrf
address_families:
- afi: ipv6
routes:
- dest: 2222:6::/64
next_hops:
- admin_distance: 55
interface: Ethernet1
state: replaced
# After State
# -----------
# veos(config)#show running-config | grep route
# ip route 10.2.2.0/24 Ethernet1
# ip route 10.2.2.0/24 64.1.1.1 label 17 33
# ip route 33.33.33.0/24 Nexthop-Group testgrp
# ip route vrf testvrf 22.65.1.0/24 Null0 90 name testroute
# ipv6 route 5222:5::/64 Management1 4312:100::1
# ipv6 route vrf testvrf 2222:6::/64 Ethernet1 55
# "after": [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "10.2.2.0/24",
# "next_hops": [
# {
# "interface": "Ethernet1"
# },
# {
# "admin_distance": 33,
# "interface": "64.1.1.1",
# "mpls_label": 17
# }
# ]
# },
# {
# "dest": "33.33.33.0/24",
# "next_hops": [
# {
# "nexthop_grp": "testgrp"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "5222:5::/64",
# "next_hops": [
# {
# "forward_router_address": "4312:100::1",
# "interface": "Management1"
# }
# ]
# }
# ]
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "22.65.1.0/24",
# "next_hops": [
# {
# "admin_distance": 90,
# "description": "testroute",
# "interface": "Null0"
# }
# ]
# }
# ]
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2222:6::/64",
# "next_hops": [
# {
# "admin_distance": 55,
# "interface": "Ethernet1"
# }
# ]
# }
# ]
# }
# ],
# "vrf": "testvrf"
# }
# ]
# Before State
# -------------
# veos(config)#show running-config | grep "route"
# ip route 165.10.1.0/24 Ethernet1 10.1.1.2 100
# ipv6 route 5001::/64 Ethernet1
# veos(config)#
- name: Gather the exisitng condiguration
arista.eos.eos_static_routes:
state: gathered
# returns :
# arista.eos.eos_static_routes:
# config:
# - address_families:
# - afi: ipv4
# routes:
# - dest: 165.10.1.0/24
# next_hop:
# - forward_router_address: 10.1.1.2
# interface: "Ethernet1"
# admin_distance: 100
# - afi: ipv6
# routes:
# - dest: 5001::/64
# next_hop:
# - interface: "Ethernet1"
# Using rendered
# arista.eos.eos_static_routes:
# config:
# - address_families:
# - afi: ipv4
# routes:
# - dest: 165.10.1.0/24
# next_hop:
# - forward_router_address: 10.1.1.2
# interface: "Ethernet1"
# admin_distance: 100
# - afi: ipv6
# routes:
# - dest: 5001::/64
# next_hop:
# - interface: "Ethernet1"
# returns:
# ip route 165.10.1.0/24 Ethernet1 10.1.1.2 100
# ipv6 route 5001::/64 Ethernet1
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list / elements=string | when changed | The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list / elements=string | always | The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list / elements=string | always | The set of commands pushed to the remote device. Sample: ['ip route vrf vrf1 192.2.2.0/24 125.2.3.1 93'] |
| gathered list / elements=string | When state is gathered
| The configuration as structured data transformed for the running configuration fetched from remote host Sample: The configuration returned will always be in the same format of the parameters above. |
| parsed list / elements=string | When state is parsed
| The configuration as structured data transformed for the value of running_config optionSample: The configuration returned will always be in the same format of the parameters above. |
| rendered list / elements=string | When state is rendered
| The set of CLI commands generated from the value in config optionSample: "address_families": [ { "afi": "ipv4", "routes": [ { "dest": "192.2.2.0/24", "next_hops": [ { "admin_distance": 93, "description": null, "forward_router_address": null, "interface": "125.2.3.1", "mpls_label": null, "nexthop_grp": null, "tag": null, "track": null, "vrf": null } ] } ] } ], "vrf": "vrf1" } ], "running_config": null, "state": "rendered" } |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_static_routes_module.html