W3cubDocs

/Ansible

cisco.aci.aci_config_rollback – Provides rollback and rollback preview functionality (config:ImportP)

Note

This plugin is part of the cisco.aci collection (version 2.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_config_rollback.

Synopsis

  • Provides rollback and rollback preview functionality for Cisco ACI fabrics.
  • Config Rollbacks are done using snapshots aci_snapshot with the configImportP class.

Parameters

Parameter Choices/Defaults Comments
annotation
string
User-defined string for annotating an object.
If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead.
certificate_name
string
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.
If a private_key filename was provided, this defaults to the private_key basename, without extension.
If PEM-formatted content was provided for private_key, this defaults to the username value.
If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.

aliases: cert_name
compare_export_policy
string
The export policy that the compare_snapshot is associated to.
compare_snapshot
string
The name of the snapshot to compare with snapshot.
description
string
The description for the Import Policy.

aliases: descr
export_policy
string
The export policy that the snapshot is associated to.
fail_on_decrypt
boolean
    Choices:
  • no
  • yes
Determines if the APIC should fail the rollback if unable to decrypt secured data.
The APIC defaults to yes when unset.
host
string / required
IP Address or hostname of APIC resolvable by Ansible control host.
If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.

aliases: hostname
import_mode
string
    Choices:
  • atomic
  • best-effort
Determines how the import should be handled by the APIC.
The APIC defaults to atomic when unset.
import_policy
string
The name of the Import Policy to use for config rollback.
import_type
string
    Choices:
  • merge
  • replace
Determines how the current and snapshot configuration should be compared for replacement.
The APIC defaults to replace when unset.
output_level
string
    Choices:
  • debug
  • info
  • normal
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead.
output_path
string
Path to a file that will be used to dump the ACI JSON configuration objects generated by the module.
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
owner_key
string
User-defined string for the ownerKey attribute of an ACI object.
This attribute represents a key for enabling clients to own their data for entity correlation.
If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.
owner_tag
string
User-defined string for the ownerTag attribute of an ACI object.
This attribute represents a tag for enabling clients to add their own data.
For example, to indicate who created this object.
If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.
password
string
The password to use for authentication.
This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.
If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Port number to be used for REST connection.
The default value depends on parameter use_ssl.
If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
private_key
string
Either a PEM-formatted private key file or the private key content used for signature-based authentication.
This value also influences the default certificate_name that is used.
This option is mutual exclusive with password. If password is provided too, it will be ignored.
If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.

aliases: cert_key
snapshot
string / required
The name of the snapshot to rollback to, or the base snapshot to use for comparison.
The aci_snapshot module can be used to query the list of available snapshots.
state
string
    Choices:
  • preview
  • rollback
Use preview for previewing the diff between two snapshots.
Use rollback for reverting the configuration to a previous snapshot.
timeout
integer
Default:
30
The socket level timeout in seconds.
If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead.
use_ssl
boolean
    Choices:
  • no
  • yes
If no, an HTTP connection will be used instead of the default HTTPS connection.
If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead.
username
string
Default:
"admin"
The username to use for authentication.
If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.
If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead.

See Also

See also

cisco.aci.aci_config_snapshot

The official documentation on the cisco.aci.aci_config_snapshot module.

APIC Management Information Model reference

More information about the internal APIC class config:ImportP.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

---
- name: Create a Snapshot
  cisco.aci.aci_config_snapshot:
    host: apic
    username: admin
    password: SomeSecretPassword
    export_policy: config_backup
    state: present
  delegate_to: localhost

- name: Query Existing Snapshots
  cisco.aci.aci_config_snapshot:
    host: apic
    username: admin
    password: SomeSecretPassword
    export_policy: config_backup
    state: query
  delegate_to: localhost

- name: Compare Snapshot Files
  cisco.aci.aci_config_rollback:
    host: apic
    username: admin
    password: SomeSecretPassword
    export_policy: config_backup
    snapshot: run-2017-08-28T06-24-01
    compare_export_policy: config_backup
    compare_snapshot: run-2017-08-27T23-43-56
    state: preview
  delegate_to: localhost

- name: Rollback Configuration
  cisco.aci.aci_config_rollback:
    host: apic
    username: admin
    password: SomeSecretPassword
    import_policy: rollback_config
    export_policy: config_backup
    snapshot: run-2017-08-28T06-24-01
    state: rollback
  delegate_to: localhost

- name: Rollback Configuration
  cisco.aci.aci_config_rollback:
    host: apic
    username: admin
    password: SomeSecretPassword
    import_policy: rollback_config
    export_policy: config_backup
    snapshot: run-2017-08-28T06-24-01
    description: Rollback 8-27 changes
    import_mode: atomic
    import_type: replace
    fail_on_decrypt: yes
    state: rollback
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
error
dictionary
failure
The error information as returned from the APIC

Sample:
{'code': '122', 'text': 'unknown managed object class foo'}
filter_string
string
failure or debug
The filter string used for the request

Sample:
?rsp-prop-include=config-only
method
string
failure or debug
The HTTP method used for the request to the APIC

Sample:
POST
preview
string
when state is preview
A preview between two snapshots

raw
string
parse error
The raw output returned by the APIC REST API (xml or json)

Sample:
<?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response
string
failure or debug
The HTTP response from the APIC

Sample:
OK (30 bytes)
status
integer
failure or debug
The HTTP status from the APIC

Sample:
200
url
string
failure or debug
The HTTP url used for the request to the APIC

Sample:
https://10.11.12.13/api/mo/uni/tn-production.json


Authors

  • Jacob McGill (@jmcgill298)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/aci/aci_config_rollback_module.html