W3cubDocs

/Ansible

cisco.ios.ios_logging_global – Logging resource module

Note

This plugin is part of the cisco.ios collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_logging_global.

New in version 2.2.0: of cisco.ios

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages the logging attributes of Cisco IOS network devices

Note

This module has a corresponding action plugin.

Parameters

Parameter						Choices/Defaults	Comments
config dictionary							A dictionary of logging options
	buffered dictionary						Set buffered logging parameters
		discriminator string					Establish MD-Buffer association
		filtered boolean				Choices: no yes	Enable filtered logging
		severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings	Logging severity level
		size integer					Logging buffer size
		xml boolean				Choices: no yes	Enable logging in XML to XML logging buffer
	buginf boolean					Choices: no yes	Enable buginf logging for debugging
	cns_events string					Choices: alerts critical debugging emergencies errors informational notifications warnings	Set CNS Event logging level
	console dictionary						Set console logging parameters
		discriminator string					Establish MD-Buffer association
		filtered boolean				Choices: no yes	Enable filtered logging
		severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings guaranteed	Logging severity level
		xml boolean				Choices: no yes	Enable logging in XML to XML logging buffer
	count boolean					Choices: no yes	Count every log message and timestamp last occurrence
	delimiter dictionary						Append delimiter to syslog messages
		tcp boolean				Choices: no yes	Append delimiter to syslog messages over TCP
	discriminator list / elements=string						Create or modify a message discriminator
	dmvpn dictionary						DMVPN Configuration
		rate_limit integer					rate in messages/minute, default is 600 messages/minute (1-10000)
	esm dictionary						Set ESM filter restrictions
		config boolean				Choices: no yes	Permit/Deny configuration changes from ESM filters
	exception integer						Limit size of exception flush output (4096-2147483647)
	facility string					Choices: auth cron daemon kern local0 local1 local2 local3 local4 local5 local6 local7 lpr mail news sys10 sys11 sys12 sys13 sys14 sys9 syslog user uucp	Facility parameter for syslog messages
	filter list / elements=dictionary						Specify logging filter
		args string					Arguments passed to filter module.
		order integer					Order of filter execution
		url string					Filter Uniform Resource Locator
	history dictionary						Configure syslog history table
		severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings	Logging severity level
		size integer					Logging buffer size
	hosts list / elements=dictionary						Set syslog server IP address and parameters
		discriminator string					Establish MD-Buffer association
		filtered boolean				Choices: no yes	Enable filtered logging
		hostname string					IP address of the syslog server
		ipv6 string					Configure IPv6 syslog server
		sequence_num_session boolean				Choices: no yes	Include session sequence number tag in syslog message
		session_id dictionary					Specify syslog message session ID tagging
			tag string			Choices: hostname ipv4 ipv6	Include hostname in session ID tag
			text string				Include custom string in session ID tag
		stream integer					This server should only receive messages from a numbered stream
		transport dictionary					Specify the transport protocol (default=UDP)
			tcp dictionary				Transport Control Protocol
				audit boolean		Choices: no yes	Set this host for IOS firewall audit logging
				discriminator string			Establish MD-Buffer association
				filtered boolean		Choices: no yes	Enable filtered logging
				port integer			Specify the TCP port number (default=601) (1 - 65535)
				sequence_num_session boolean		Choices: no yes	Include session sequence number tag in syslog message
				session_id dictionary			Specify syslog message session ID tagging
					tag string	Choices: hostname ipv4 ipv6	Include hostname in session ID tag
					text string		Include custom string in session ID tag
				stream integer			This server should only receive messages from a numbered stream
				xml boolean		Choices: no yes	Enable logging in XML to XML logging buffer
			udp dictionary				User Datagram Protocol
				discriminator string			Establish MD-Buffer association
				filtered boolean		Choices: no yes	Enable filtered logging
				port integer			Specify the UDP port number (default=514) (1 - 65535)
				sequence_num_session boolean		Choices: no yes	Include session sequence number tag in syslog message
				session_id dictionary			Specify syslog message session ID tagging
					tag string	Choices: hostname ipv4 ipv6	Include hostname in session ID tag
					text string		Include custom string in session ID tag
				stream integer			This server should only receive messages from a numbered stream
				xml boolean		Choices: no yes	Enable logging in XML to XML logging buffer
		vrf string					Set VRF option
		xml boolean				Choices: no yes	Enable logging in XML to XML logging buffer
	logging_on string					Choices: enable disable	Enable logging to all enabled destinations
	message_counter list / elements=string					Choices: log debug syslog	Configure log message to include certain counter value
	monitor dictionary						Set terminal line (monitor) logging parameters
		discriminator string					Establish MD-Buffer association
		filtered boolean				Choices: no yes	Enable filtered logging
		severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings	Logging severity level
		xml boolean				Choices: no yes	Enable logging in XML to XML logging buffer
	origin_id dictionary						Add origin ID to syslog messages
		tag string				Choices: hostname ip ipv6	Include hostname in session ID tag
		text string					Include custom string in session ID tag
	persistent dictionary						Set persistent logging parameters
		batch integer					Set batch size for writing to persistent storage (4096-2142715904)
		filesize integer					Set size of individual log files (4096-2142715904)
		immediate boolean				Choices: no yes	Write log entry to storage immediately (no buffering).
		notify boolean				Choices: no yes	Notify when show logging [persistent] is activated.
		protected boolean				Choices: no yes	Eliminates manipulation on logging-persistent files.
		size integer					Set disk space for writing log messages (4096-2142715904)
		threshold integer					Set threshold for logging persistent
		url string					URL to store logging messages
	policy_firewall dictionary						Firewall configuration
		rate_limit integer					(0-3600) value in seconds, default is 30 Sec.
	queue_limit dictionary						Set logger message queue size
		esm integer					(100-2147483647) set new queue size
		size integer					(100-2147483647) set new queue size
		trap integer					(100-2147483647) set new queue size
	rate_limit dictionary						Set messages per second limit
		all boolean				Choices: no yes	(1-10000) message per second
		console boolean				Choices: no yes	(1-10000) message per second
		except_severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings	Messages of this severity or higher
		size integer / required					(1-10000) message per second
	reload dictionary						Set reload logging level
		message_limit integer					Number of messages (1-4294967295)
		severity string				Choices: alerts critical debugging emergencies errors informational notifications warnings	Logging severity level
	server_arp boolean					Choices: no yes	Enable sending ARP requests for syslog servers when first configured
	snmp_trap list / elements=string					Choices: alerts critical debugging emergencies errors informational notifications warnings	Set syslog level for sending snmp trap
	source_interface list / elements=dictionary						Specify interface for source address in logging transactions
		interface string					Interface name with number
		vrf string					VPN Routing/Forwarding instance name
	trap string					Choices: alerts critical debugging emergencies errors informational notifications warnings	Set syslog server logging level
	userinfo boolean					Choices: no yes	Enable logging of user info on privileged mode enabling
running_config string							This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command show running-config \| include logging. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string						Choices: merged ← replaced overridden deleted gathered parsed rendered	The state the configuration should be left in With state replaced, for the listed logging configurations, that are in running-config and can have multiple set of commands but not in the task are negated. With state overridden, all configurations that are in running-config but not in the task are negated. Please refer to examples for more details.

Notes

Note

Tested against Cisco IOSv Version 15.6
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html
The Configuration defaults of the Cisco IOS network devices are supposed to hinder idempotent behavior of plays

Examples

# Using state: merged

# Before state:
# -------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap

- name: Apply the provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: notifications
        size: 5099
        xml: True
      console:
        severity: critical
        xml: True
      facility: local5
      hosts:
        - hostname: 172.16.1.12
        - hostname: 172.16.1.11
          xml: True
        - hostname: 172.16.1.10
          filtered: True
          stream: 10
        - hostname: 172.16.1.13
          transport:
            tcp:
              port: 514
      monitor:
        severity: warnings
      message_counter: log
      snmp_trap:
        - errors
      trap: errors
      userinfo: True
      policy_firewall:
        rate_limit: 10
      logging_on: True
      exception: 4099
      dmvpn:
        rate_limit: 10
      cns_events: warnings
    state: merged

# Commands Fired:
# ---------------

# "commands": [
#       "logging buffered xml 5099 notifications",
#       "logging cns-events warnings",
#       "logging console xml critical",
#       "logging dmvpn rate-limit 10",
#       "logging exception 4099",
#       "logging facility local5",
#       "logging monitor warnings",
#       "logging on",
#       "logging policy-firewall rate-limit 10",
#       "logging trap errors",
#       "logging userinfo",
#       "logging host 172.16.1.12",
#       "logging host 172.16.1.10 filtered stream 10",
#       "logging host 172.16.1.13 transport tcp port 514",
#       "logging message-counter log",
#       "logging snmp-trap errors",
#       "logging host 172.16.1.11 xml"
#     ],


# After state:
# ------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging snmp-trap warnings
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

# Using state: deleted

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

- name: Remove all existing configuration
  cisco.ios.ios_logging_global:
    state: deleted

# Commands Fired:
# ---------------

# "commands": [
#       "no logging message-counter log",
#       "no logging snmp-trap errors",
#       "no logging host 172.16.1.13",
#       "no logging host 172.16.1.11",
#       "no logging host 172.16.1.12",
#       "no logging host 172.16.1.10",
#       "no logging exception 4099",
#       "no logging userinfo",
#       "no logging buffered xml 5099 notifications",
#       "no logging console xml critical",
#       "no logging monitor warnings",
#       "no logging cns-events warnings",
#       "no logging policy-firewall rate-limit 10",
#       "no logging dmvpn rate-limit 10",
#       "no logging trap errors",
#       "no logging facility local5"
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap

# Using state: overridden

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered 6000 critical
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local6
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

- name: Override commands with provided configuration
  cisco.ios.ios_logging_global:
    config:
      hosts:
        - hostname: 172.16.1.27
          filtered: True
    state: overridden

# Commands Fired:
# ---------------
# "commands": [
#         "no logging message-counter log",
#         "no logging host 172.16.1.12",
#         "no logging host 172.16.1.10",
#         "no logging host 172.16.1.13",
#         "no logging exception 4099",
#         "no logging userinfo",
#         "no logging console xml critical",
#         "no logging monitor warnings",
#         "no logging cns-events warnings",
#         "no logging policy-firewall rate-limit 10",
#         "no logging dmvpn rate-limit 10",
#         "no logging trap errors",
#         "no logging buffered 6000 critical",
#         "no logging facility local6",
#         "logging host 172.16.1.27 filtered",
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap
# logging host 172.16.1.27 filtered

# Using state: replaced

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

- name: Replace commands with provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: alerts
        size: 6025
      facility: local6
      hosts:
        - hostname: 172.16.1.19
        - hostname: 172.16.1.10
          filtered: true
          stream: 15
    state: replaced

# Commands Fired:
# ---------------

# "commands": [
#         "no logging host 172.16.1.13",
#         "no logging host 172.16.1.11",
#         "no logging host 172.16.1.12",
#         "no logging host 172.16.1.10",
#         "logging host 172.16.1.19",
#         "logging host 172.16.1.10 filtered stream 15",
#         "logging buffered 6025 alerts",
#         "logging facility local6"
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered 6025 alerts
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local6
# logging snmp-trap errors
# logging host 172.16.1.19

# Using state: gathered

# Before state:
# -------------

#router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

- name: Gather listed logging config
  cisco.ios.ios_logging_global:
    state: gathered

# Module Execution Result:
# ------------------------

# "gathered": {
#     "buffered": {
#         "severity": "notifications",
#         "size": 5099,
#         "xml": true
#     },
#     "cns_events": "warnings",
#     "console": {
#         "severity": "critical",
#         "xml": true
#     },
#     "dmvpn": {
#         "rate_limit": 10
#     },
#     "exception": 4099,
#     "facility": "local5",
#     "hosts": [
#         {
#             "hostname": "172.16.1.11",
#             "xml": true
#         },
#         {
#             "hostname": "172.16.1.12"
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.10",
#             "stream": 10
#         },
#         {
#             "hostname": "172.16.1.13",
#             "transport": {
#                 "tcp": {
#                     "port": 514
#                 }
#             }
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.25"
#         }
#     ],
#     "message_counter": [
#         "log"
#     ],
#     "monitor": {
#         "severity": "warnings"
#     },
#     "policy_firewall": {
#         "rate_limit": 10
#     },
#     "snmp_trap": [
#         "errors"
#     ],
#     "trap": "errors",
#     "userinfo": true
# },

# After state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

# Using state: rendered

- name: Render the commands for provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: notifications
        size: 5099
        xml: True
      console:
        severity: critical
        xml: True
      facility: local5
      hosts:
        - hostname: 172.16.1.12
        - hostname: 172.16.1.11
          xml: True
        - hostname: 172.16.1.10
          filtered: True
          stream: 10
        - hostname: 172.16.1.13
          transport:
            tcp:
              port: 514
      monitor:
        severity: warnings
      message_counter: log
      snmp_trap: errors
      trap: errors
      userinfo: True
      policy_firewall:
          rate_limit: 10
      logging_on: True
      exception: 10
      dmvpn:
        rate_limit: 10
      cns_events: warnings
    state: rendered

# Module Execution Result:
# ------------------------

# "rendered": [
#     "logging host 172.16.1.12",
#     "logging host 172.16.1.11 xml",
#     "logging host 172.16.1.10 filtered stream 10",
#     "logging host 172.16.1.13 transport tcp port 514",
#     "logging message-counter log",
#     "logging snmp-trap errors",
#     "logging buffered xml 5099 notifications",
#     "logging console xml critical",
#     "logging facility local5",
#     "logging monitor warnings",
#     "logging trap errors",
#     "logging userinfo",
#     "logging policy-firewall rate-limit 10",
#     "logging on",
#     "logging exception 10",
#     "logging dmvpn rate-limit 10",
#     "logging cns-events warnings"
#     ]

# Using state: parsed

# File: parsed.cfg
# ----------------

# logging on
# logging count
# logging userinfo
# logging trap errors
# logging reload alerts
# logging host 172.16.1.1
# logging exception 4099
# logging history alerts
# logging facility local5
# logging snmp-trap errors
# logging monitor warnings
# logging origin-id hostname
# logging host 172.16.1.11 xml
# logging cns-events warnings
# logging dmvpn rate-limit 10
# logging message-counter log
# logging console xml critical
# logging message-counter debug
# logging persistent batch 4444
# logging host 172.16.1.25 filtered
# logging source-interface GBit1/0
# logging source-interface CTunnel2
# logging policy-firewall rate-limit 10
# logging buffered xml 5099 notifications
# logging rate-limit all 2 except warnings
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.13 transport tcp port 514
# logging discriminator msglog01 severity includes 5
# logging filter tftp://172.16.2.18/ESM/elate.tcl args TESTInst2
# logging filter tftp://172.16.2.14/ESM/escalate.tcl args TESTInst

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_logging_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------

# "parsed": {
#     "buffered": {
#         "severity": "notifications",
#         "size": 5099,
#         "xml": true
#     },
#     "cns_events": "warnings",
#     "console": {
#         "severity": "critical",
#         "xml": true
#     },
#     "count": true,
#     "discriminator": [
#         "msglog01 severity includes 5"
#     ],
#     "dmvpn": {
#         "rate_limit": 10
#     },
#     "exception": 4099,
#     "facility": "local5",
#     "filter": [
#         {
#             "args": "TESTInst2",
#             "url": "tftp://172.16.2.18/ESM/elate.tcl"
#         },
#         {
#             "args": "TESTInst",
#             "url": "tftp://172.16.2.14/ESM/escalate.tcl"
#         }
#     ],
#     "history": {
#         "severity": "alerts"
#     },
#     "hosts": [
#         {
#             "hostname": "172.16.1.1"
#         },
#         {
#             "hostname": "172.16.1.11",
#             "xml": true
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.25"
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.10",
#             "stream": 10
#         },
#         {
#             "hostname": "172.16.1.13",
#             "transport": {
#                 "tcp": {
#                     "port": 514
#                 }
#             }
#         }
#     ],
#     "logging_on": "enable",
#     "message_counter": [
#         "log",
#         "debug"
#     ],
#     "monitor": {
#         "severity": "warnings"
#     },
#     "origin_id": {
#         "tag": "hostname"
#     },
#     "persistent": {
#         "batch": 4444
#     },
#     "policy_firewall": {
#         "rate_limit": 10
#     },
#     "rate_limit": {
#         "all": true,
#         "except_severity": "warnings",
#         "size": 2
#     },
#     "reload": {
#         "severity": "alerts"
#     },
#     "snmp_trap": [
#         "errors"
#     ],
#     "source_interface": [
#         {
#             "interface": "GBit1/0"
#         },
#         {
#             "interface": "CTunnel2"
#         }
#     ],
#     "trap": "errors",
#     "userinfo": true
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before dictionary	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['logging on', 'logging userinfo', 'logging trap errors', 'logging host 172.16.1.12', 'logging console xml critical', 'logging message-counter log', 'logging policy-firewall rate-limit 10']

Authors

Sagar Paul (@KB-perByte)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/ios/ios_logging_global_module.html