Note
This plugin is part of the cisco.iosxr collection (version 2.5.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_config.
New in version 1.0.0: of cisco.iosxr
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| admin boolean |
| Enters into administration configuration mode for making config changes to the device. | |
| after list / elements=string | The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set. | ||
| backup boolean |
| This argument will cause the module to create a full backup of the current running-config from the remote device before any changes are made. If the backup_options value is not given, the backup file is written to the backup folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created. | |
| backup_options dictionary | This is a dict object containing configurable options related to backup file path. The value of this option is read only when backup is set to yes, if backup is set to no this option will be silently ignored. | ||
| dir_path path | This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of filename or default filename as described in filename options description. If the path value is not given in that case a backup directory will be created in the current working directory and backup configuration will be copied in filename within backup directory. | ||
| filename string | The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time> | ||
| before list / elements=string | The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system. | ||
| comment string | Default: "configured by iosxr_config" | Allows a commit description to be specified to be included when the configuration is committed. If the configuration is not changed or committed, this argument is ignored. | |
| config string | The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The config argument allows the implementer to pass in the configuration to use as the base config for comparison. The configuration lines for this option should be similar to how it will appear if present in the running-configuration of the device to ensure idempotency and correct diff. | ||
| exclusive boolean |
| Enters into exclusive configuration mode that locks out all users from committing configuration changes until the exclusive session ends. | |
| force boolean |
| The force argument instructs the module to not consider the current devices running-config. When set to true, this will cause the module to push the contents of src into the device without first checking if already configured. Note this argument should be considered deprecated. To achieve the equivalent, set the match=none which is idempotent. This argument will be removed in a future release. | |
| label string | Allows a commit label to be specified to be included when the configuration is committed. A valid label must begin with an alphabet and not exceed 30 characters, only alphabets, digits, hyphens and underscores are allowed. If the configuration is not changed or committed, this argument is ignored. | ||
| lines list / elements=string | The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config as found in the device running-config to ensure idempotency and correct diff. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. aliases: commands | ||
| match string |
| Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device. | |
| parents list / elements=string | The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands. | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli.For more information please see the Network Guide. A dict object containing connection details. | ||
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. | ||
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| transport string |
| Specifies the type of connection based transport. | |
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| replace string |
| Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct. | |
| src path | Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents. The configuration lines in the source file should be similar to how it will appear if present in the running-configuration of the device to ensure idempotency and correct diff. | ||
Note
network_cli. See the IOS-XR Platform Options.netconf connectionend in the replace config file.- name: configure top level configuration
cisco.iosxr.iosxr_config:
lines: hostname {{ inventory_hostname }}
- name: configure interface settings
cisco.iosxr.iosxr_config:
lines:
- description test interface
- ip address 172.31.1.1 255.255.255.0
parents: interface GigabitEthernet0/0/0/0
- name: load a config from disk and replace the current config
cisco.iosxr.iosxr_config:
src: config.cfg
replace: config
backup: yes
- name: for idempotency, use full-form commands
cisco.iosxr.iosxr_config:
lines:
# - shut
- shutdown
# parents: int g0/0/0/1
parents: interface GigabitEthernet0/0/0/1
- name: configurable backup path
cisco.iosxr.iosxr_config:
src: config.cfg
backup: yes
backup_options:
filename: backup.cfg
dir_path: /home/user
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| backup_path string | when backup is yes | The full path to the backup file Sample: /playbooks/ansible/backup/iosxr01_config.2016-07-16@22:28:34 |
| commands list / elements=string | If there are commands to run against the host | The set of commands that will be pushed to the remote device Sample: ['hostname foo', 'router ospf 1', 'router-id 1.1.1.1'] |
| date string | when backup is yes | The date extracted from the backup file name Sample: 2016-07-16 |
| filename string | when backup is yes and filename is not specified in backup options | The name of the backup file Sample: iosxr01_config.2016-07-16@22:28:34 |
| shortname string | when backup is yes and filename is not specified in backup options | The full path to the backup file excluding the timestamp Sample: /playbooks/ansible/backup/iosxr01_config |
| time string | when backup is yes | The time extracted from the backup file name Sample: 22:28:34 |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_config_module.html