Note
This plugin is part of the cisco.iosxr collection (version 2.5.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_interfaces.
New in version 1.0.0: of cisco.iosxr
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| config list / elements=dictionary | A dictionary of interface options | ||
| description string | Interface description. | ||
| duplex string |
| Configures the interface duplex mode. Default is auto-negotiation when not configured. | |
| enabled boolean |
| Administrative state of the interface. Set the value to True to administratively enable the interface or False to disable it. | |
| mtu integer | Sets the MTU value for the interface. Applicable for Ethernet interfaces only. Refer to vendor documentation for valid values. | ||
| name string / required | Full name of the interface to configure in type + path format. e.g. GigabitEthernet0/0/0/0
| ||
| speed integer | Configure the speed for an interface. Default is auto-negotiation when not configured. | ||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | ||
| state string |
| The state of the configuration after module completion | |
Note
network_cli. See the IOS-XR Platform Options.# Using merged
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Replaced by Ansible Team
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
- name: Configure Ethernet interfaces
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
duplex: full
state: merged
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Merged by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Merged by Ansible Network
# mtu 2600
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
# Using replaced
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# description Configured by Ansible
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Test
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
- name: Configure following interfaces and replace their existing config
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
mtu: 2000
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
duplex: auto
state: replaced
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# description Configured by Ansible
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Replaced by Ansible
# mtu 2000
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Replaced by Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 1021
# !
# Using overridden
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured by Ansible
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured by Ansible
# mtu 2600
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
- name: Override interfaces
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
description: Configured by Ansible
enabled: true
duplex: auto
- name: GigabitEthernet0/0/0/3
description: Configured by Ansible Network
enabled: false
speed: 1000
state: overridden
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Overridden by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# speed 1000
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Overridden by Ansible Network
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
# Using deleted
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# description Configured and Overridden by Ansible Network
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# speed 1000
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# description Configured and Overridden by Ansible Network
# mtu 2000
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex full
# shutdown
# dot1q native vlan 1021
# !
- name: Delete IOSXR interfaces as in given arguments
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/2
- name: GigabitEthernet0/0/0/3
state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
# shutdown
# !
# interface GigabitEthernet0/0/0/2
# vrf custB
# ipv4 address 178.18.169.23 255.255.255.0
# dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# dot1q native vlan 1021
# !
# Using parsed
# parsed.cfg
# ------------
#
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
# - name: Convert ACL interfaces config to argspec without connecting to the appliance
# cisco.iosxr.iosxr_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "name": "MgmtEth0/RP0/CPU0/0"
# },
# {
# "access_groups": [
# {
# "acls": [
# {
# "direction": "in",
# "name": "acl_1"
# },
# {
# "direction": "out",
# "name": "acl_2"
# }
# ],
# "afi": "ipv4"
# },
# {
# "acls": [
# {
# "direction": "in",
# "name": "acl6_1"
# },
# {
# "direction": "out",
# "name": "acl6_2"
# }
# ],
# "afi": "ipv6"
# }
# ],
# "name": "GigabitEthernet0/0/0/0"
# },
# {
# "access_groups": [
# {
# "acls": [
# {
# "direction": "out",
# "name": "acl_1"
# }
# ],
# "afi": "ipv4"
# }
# ],
# "name": "GigabitEthernet0/0/0/1"
# }
# ]
# }
# Using rendered
- name: Render platform specific commands from task input using rendered state
cisco.iosxr.iosxr_interfaces:
config:
- name: GigabitEthernet0/0/0/0
description: Configured and Merged by Ansible-Network
mtu: 110
enabled: true
duplex: half
- name: GigabitEthernet0/0/0/1
description: Configured and Merged by Ansible-Network
mtu: 2800
enabled: false
speed: 100
duplex: full
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
# "interface GigabitEthernet0/0/0/0",
# "description Configured and Merged by Ansible-Network",
# "mtu 110",
# "duplex half",
# "no shutdown",
# "interface GigabitEthernet0/0/0/1",
# "description Configured and Merged by Ansible-Network",
# "mtu 2800",
# "speed 100",
# "duplex full",
# "shutdown"
# ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
- name: Gather IOSXR interfaces as in given arguments
cisco.iosxr.iosxr_interfaces:
config:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "description": "test for ansible",
# "enabled": false,
# "name": "Loopback888"
# },
# {
# "description": "Configured and Merged by Ansible-Network",
# "duplex": "half",
# "enabled": true,
# "mtu": 110,
# "name": "GigabitEthernet0/0/0/0"
# },
# {
# "enabled": false,
# "name": "GigabitEthernet0/0/0/3"
# },
# {
# "enabled": false,
# "name": "GigabitEthernet0/0/0/4"
# }
# ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list / elements=string | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list / elements=string | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list / elements=string | always | The set of commands pushed to the remote device Sample: ['interface GigabitEthernet0/0/0/2', 'description: Configured by Ansible', 'shutdown'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_interfaces_module.html