Note
This plugin is part of the cisco.iosxr collection (version 2.5.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_system.
New in version 1.0.0: of cisco.iosxr
Note
This module has a corresponding action plugin.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| domain_name string | Configure the IP domain name on the remote device to the provided value. Value should be in the dotted name form and will be appended to the hostname to create a fully-qualified domain name. | ||
| domain_search list / elements=string | Provides the list of domain suffixes to append to the hostname for the purpose of doing name resolution. This argument accepts a list of names and will be reconciled with the current active configuration on the running node. | ||
| hostname string | Configure the device hostname parameter. This option takes an ASCII string value. | ||
| lookup_enabled boolean |
| Provides administrative control for enabling or disabling DNS lookups. When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed. | |
| lookup_source string | The lookup_source argument provides one or more source interfaces to use for performing DNS lookups. The interface provided in lookup_source must be a valid interface configured on the device. | ||
| name_servers list / elements=string | The name_serves argument accepts a list of DNS name servers by way of either FQDN or IP address to use to perform name resolution lookups. This argument accepts wither a list of DNS servers See examples. | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli.For more information please see the Network Guide. A dict object containing connection details. | ||
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. | ||
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| transport string |
| Specifies the type of connection based transport. | |
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| state string |
| State of the configuration values in the device's current active configuration. When set to present, the values should be configured in the device active configuration and when set to absent the values should not be in the device active configuration | |
| vrf string | Default: "default" | VRF name for domain services | |
Note
network_cli and netconf. See the IOS-XR Platform Options.netconf transport is a success, but with rpc-error. This is due to XR platform issue. Recommended to use ignore_errors option with the task as a workaround.- name: configure hostname and domain-name (default vrf=default)
cisco.iosxr.iosxr_system:
hostname: iosxr01
domain_name: test.example.com
domain_search:
- ansible.com
- redhat.com
- cisco.com
- name: remove configuration
cisco.iosxr.iosxr_system:
hostname: iosxr01
domain_name: test.example.com
domain_search:
- ansible.com
- redhat.com
- cisco.com
state: absent
- name: configure hostname and domain-name with vrf
cisco.iosxr.iosxr_system:
hostname: iosxr01
vrf: nondefault
domain_name: test.example.com
domain_search:
- ansible.com
- redhat.com
- cisco.com
- name: configure DNS lookup sources
cisco.iosxr.iosxr_system:
lookup_source: MgmtEth0/0/CPU0/0
lookup_enabled: true
- name: configure name servers
cisco.iosxr.iosxr_system:
name_servers:
- 8.8.8.8
- 8.8.4.4
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list / elements=string | always | The list of configuration mode commands to send to the device Sample: ['hostname iosxr01', 'ip domain-name test.example.com'] |
| xml list / elements=string | always (empty list when no xml rpc to send) | NetConf rpc xml sent to device with transport netconf
Sample: ['<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0"> <ip-domain xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-ip-domain-cfg"> <vrfs> <vrf> <vrf-name>default</vrf-name> <lists> <list xc:operation="merge"> <order>0</order> <list-name>redhat.com</list-name> </list> </lists> </vrf> </vrfs> </ip-domain> </config>'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_system_module.html