W3cubDocs

/Ansible

cisco.meraki.meraki_management_interface – Configure Meraki management interfaces

Note

This plugin is part of the cisco.meraki collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki.

To use it in a playbook, specify: cisco.meraki.meraki_management_interface.

New in version 1.1.0: of cisco.meraki

Synopsis

  • Allows for configuration of management interfaces on Meraki MX, MS, and MR devices.

Parameters

Parameter Choices/Defaults Comments
auth_key
string / required
Authentication key provided by the dashboard. Required if environmental variable MERAKI_KEY is not set.
host
string
Default:
"api.meraki.com"
Hostname for Meraki dashboard.
Can be used to access regional Meraki environments, such as China.
internal_error_retry_time
integer
Default:
60
Number of seconds to retry if server returns an internal server error.
net_id
string
ID of the network to bind or unbind configuration template to.
net_name
string
Name of the network to bind or unbind configuration template to.
org_id
string
ID of organization associated to a configuration template.
org_name
string
Name of organization containing the configuration template.

aliases: organization
output_format
string
    Choices:
  • snakecase
  • camelcase
Instructs module whether response keys should be snake case (ex. net_id) or camel case (ex. netId).
output_level
string
    Choices:
  • debug
  • normal
Set amount of debug output during module execution.
rate_limit_retry_time
integer
Default:
165
Number of seconds to retry if rate limiter is triggered.
serial
string / required
serial number of the device to configure.
state
string
    Choices:
  • absent
  • query
  • present
Specifies whether configuration template information should be queried, modified, or deleted.
timeout
integer
Default:
30
Time to timeout for HTTP requests.
use_https
boolean
    Choices:
  • no
  • yes
If no, it will use HTTP. Otherwise it will use HTTPS.
Only useful for internal Meraki developers.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
validate_certs
boolean
    Choices:
  • no
  • yes
Whether to validate HTTP certificates.
wan1
dictionary
Management interface details for management interface.

aliases: mgmt1
static_dns
list / elements=string
DNS servers to use.
Allows for a maximum of 2 addresses.
static_gateway_ip
string
IP address for default gateway.
Valid only if using_static_ip is True.
static_ip
string
IP address assigned to Management interface.
Valid only if using_static_ip is True.
static_subnet_mask
string
Netmask for static IP address.
Valid only if using_static_ip is True.
using_static_ip
boolean
    Choices:
  • no
  • yes
Configures the interface to use static IP or DHCP.
vlan
integer
VLAN number to use for the management network.
wan_enabled
string
    Choices:
  • disabled
  • enabled
  • not configured
States whether the management interface is enabled.
Only valid for MX devices.
wan2
dictionary
Management interface details for management interface.

aliases: mgmt2
static_dns
list / elements=string
DNS servers to use.
Allows for a maximum of 2 addresses.
static_gateway_ip
string
IP address for default gateway.
Valid only if using_static_ip is True.
static_ip
string
IP address assigned to Management interface.
Valid only if using_static_ip is True.
static_subnet_mask
string
Netmask for static IP address.
Valid only if using_static_ip is True.
using_static_ip
boolean
    Choices:
  • no
  • yes
Configures the interface to use static IP or DHCP.
vlan
integer
VLAN number to use for the management network.
wan_enabled
string
    Choices:
  • disabled
  • enabled
  • not configured
States whether the management interface is enabled.
Only valid for MX devices.

Notes

Note

  • WAN2 parameter is only valid for MX appliances.
  • wan_enabled should not be provided for non-MX devies.
  • More information about the Meraki API can be found at https://dashboard.meraki.com/api_docs.
  • Some of the options are likely only used for developers within Meraki.
  • As of Ansible 2.9, Meraki modules output keys as snake case. To use camel case, set the ANSIBLE_MERAKI_FORMAT environment variable to camelcase.
  • Ansible’s Meraki modules will stop supporting camel case output in Ansible 2.13. Please update your playbooks.
  • Check Mode downloads the current configuration from the dashboard, then compares changes against this download. Check Mode will report changed if there are differences in the configurations, but does not submit changes to the API for validation of change.

Examples

- name: Set WAN2 as static IP
  meraki_management_interface:
    auth_key: abc123
    state: present
    org_name: YourOrg
    net_id: YourNetId
    serial: AAAA-BBBB-CCCC
    wan2:
      wan_enabled: enabled
      using_static_ip: yes
      static_ip: 192.168.16.195
      static_gateway_ip: 192.168.16.1
      static_subnet_mask: 255.255.255.0
      static_dns:
        - 1.1.1.1
      vlan: 1
  delegate_to: localhost

- name: Query management information
  meraki_management_interface:
    auth_key: abc123
    state: query
    org_name: YourOrg
    net_id: YourNetId
    serial: AAAA-BBBB-CCCC
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
data
complex
success
Information about queried object.

wan1
complex
success
Management configuration for WAN1 interface

static_dns
list / elements=string
only if static IP assignment is used
List of DNS IP addresses

Sample:
['1.1.1.1']
static_gateway_ip
string
only if static IP assignment is used
Assigned static gateway IP

Sample:
192.0.1.1
static_ip
string
only if static IP assignment is used
Assigned static IP

Sample:
192.0.1.2
static_subnet_mask
string
only if static IP assignment is used
Assigned netmask for static IP

Sample:
255.255.255.0
using_static_ip
boolean
success
Boolean value of whether static IP assignment is used on interface

Sample:
True
vlan
integer
success
VLAN tag id of management VLAN

Sample:
2
wan_enabled
string
success
Enabled state of interface

Sample:
enabled
wan2
complex
success
Management configuration for WAN1 interface

static_dns
list / elements=string
only if static IP assignment is used
List of DNS IP addresses

Sample:
['1.1.1.1']
static_gateway_ip
string
only if static IP assignment is used
Assigned static gateway IP

Sample:
192.0.1.1
static_ip
string
only if static IP assignment is used
Assigned static IP

Sample:
192.0.1.2
static_subnet_mask
string
only if static IP assignment is used
Assigned netmask for static IP

Sample:
255.255.255.0
using_static_ip
boolean
success
Boolean value of whether static IP assignment is used on interface

Sample:
True
vlan
integer
success
VLAN tag id of management VLAN

Sample:
2
wan_enabled
string
success
Enabled state of interface

Sample:
enabled


Authors

  • Kevin Breit (@kbreit)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/meraki/meraki_management_interface_module.html