W3cubDocs

/Ansible

cisco.nxos.nxos_bgp_global – BGP Global resource module.

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp_global.

New in version 1.4.0: of cisco.nxos

Synopsis

  • This module manages global BGP configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
A list of BGP process configuration.
affinity_group
dictionary
Configure an affinity group.
group_id
integer
Affinity Group ID.
as_number
string
Autonomous System Number of the router.
bestpath
dictionary
Define the default bestpath selection algorithm.
always_compare_med
boolean
    Choices:
  • no
  • yes
Compare MED on paths from different AS.
as_path
dictionary
AS-Path.
ignore
boolean
    Choices:
  • no
  • yes
Ignore AS-Path during bestpath selection.
multipath_relax
boolean
    Choices:
  • no
  • yes
Relax AS-Path restriction when choosing multipaths.
compare_neighborid
boolean
    Choices:
  • no
  • yes
When more paths are available than max path config, use neighborid as tie-breaker.
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare router-id for identical EBGP paths.
cost_community_ignore
boolean
    Choices:
  • no
  • yes
Ignore cost communities in bestpath selection.
igp_metric_ignore
boolean
    Choices:
  • no
  • yes
Ignore IGP metric for next-hop during bestpath selection.
med
dictionary
MED
confed
boolean
    Choices:
  • no
  • yes
Compare MED only from paths originated from within a confederation.
missing_as_worst
boolean
    Choices:
  • no
  • yes
Treat missing MED as highest MED.
non_deterministic
boolean
    Choices:
  • no
  • yes
Not always pick the best-MED path among paths from same AS.
cluster_id
string
Configure Route Reflector Cluster-ID.
confederation
dictionary
AS confederation parameters.
identifier
string
Set routing domain confederation AS.
peers
list / elements=string
Peer ASs in BGP confederation.
disable_policy_batching
dictionary
Disable batching evaluation of outbound policy for a peer.
ipv4
dictionary
IPv4 address-family settings.
prefix_list
string
Name of prefix-list to apply.
ipv6
dictionary
IPv6 address-family settings.
prefix_list
string
Name of prefix-list to apply.
nexthop
boolean
    Choices:
  • no
  • yes
Batching based on nexthop.
set
boolean
    Choices:
  • no
  • yes
Set policy batching.
dynamic_med_interval
integer
Sets the interval for dampening of med changes.
enforce_first_as
boolean
    Choices:
  • no
  • yes
Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP).
enhanced_error
boolean
    Choices:
  • no
  • yes
Enable BGP Enhanced error handling.
fabric_soo
string
Fabric site of origin.
fast_external_fallover
boolean
    Choices:
  • no
  • yes
Immediately reset the session if the link to a directly connected BGP peer goes down.
flush_routes
boolean
    Choices:
  • no
  • yes
Flush routes in RIB upon controlled restart.
graceful_restart
dictionary
Configure Graceful Restart functionality.
helper
boolean
    Choices:
  • no
  • yes
Configure Graceful Restart Helper mode functionality.
restart_time
integer
Maximum time for restart advertised to peers.
set
boolean
    Choices:
  • no
  • yes
Enable graceful-restart.
stalepath_time
integer
Maximum time to keep a restarting peer's stale routes.
graceful_shutdown
dictionary
Graceful-shutdown for BGP protocol.
activate
dictionary
Send graceful-shutdown community on all routes.
route_map
string
Apply route-map to modify attributes for outbound.
set
boolean
    Choices:
  • no
  • yes
Activiate graceful-shutdown.
aware
boolean
    Choices:
  • no
  • yes
Lower preference of routes carrying graceful-shutdown community.
isolate
dictionary
Isolate this router from BGP perspective.
include_local
boolean
    Choices:
  • no
  • yes
Withdraw both local and remote BGP routes.
set
boolean
    Choices:
  • no
  • yes
Withdraw remote BGP routes to isolate this router.
log_neighbor_changes
boolean
    Choices:
  • no
  • yes
Log a message for neighbor up/down event.
maxas_limit
integer
Allow AS-PATH attribute from EBGP neighbor imposing a limit on number of ASes.
neighbor_down
dictionary
Handle BGP neighbor down event, due to various reasons.
fib_accelerate
boolean
    Choices:
  • no
  • yes
Accelerate the hardware updates for IP/IPv6 adjacencies for neighbor.
neighbors
list / elements=dictionary
Configure BGP neighbors.
bfd
dictionary
Bidirectional Fast Detection for the neighbor.
multihop
dictionary
Multihop session.
interval
dictionary
Configure BFD session interval parameters.
min_rx_interval
integer
Minimum RX interval.
multiplier
integer
Detect Multiplier.
tx_interval
integer
TX interval in milliseconds.
set
boolean
    Choices:
  • no
  • yes
Set BFD multihop.
set
boolean
    Choices:
  • no
  • yes
Set BFD for this neighbor.
singlehop
boolean
    Choices:
  • no
  • yes
Single-hop session.
bmp_activate_server
integer
Specify server ID for activating BMP monitoring for the peer.
capability
dictionary
Capability.
suppress_4_byte_as
boolean
    Choices:
  • no
  • yes
Suppress 4-byte AS Capability.
description
string
Neighbor specific descripion.
disable_connected_check
boolean
    Choices:
  • no
  • yes
Disable check for directly connected peer.
dont_capability_negotiate
boolean
    Choices:
  • no
  • yes
Don't negotiate capability with this neighbor.
dscp
string
Set dscp value for tcp transport.
dynamic_capability
boolean
    Choices:
  • no
  • yes
Dynamic Capability
ebgp_multihop
integer
Specify multihop TTL for remote peer.
graceful_shutdown
dictionary
Graceful-shutdown for this neighbor.
activate
dictionary
Send graceful-shutdown community.
route_map
string
Apply route-map to modify attributes for outbound.
set
boolean
    Choices:
  • no
  • yes
Set activate.
inherit
dictionary
Inherit a template.
peer
string
Peer template to inherit.
peer_session
string
Peer-session template to inherit.
local_as
string
Specify the local-as number for the eBGP neighbor.
log_neighbor_changes
dictionary
Log message for neighbor up/down event.
disable
boolean
    Choices:
  • no
  • yes
Disable logging of neighbor up/down event.
set
boolean
    Choices:
  • no
  • yes
Set log-neighbor-changes.
low_memory
dictionary
Behaviour in low memory situations.
exempt
boolean
    Choices:
  • no
  • yes
Do not shutdown this peer when under memory pressure.
neighbor_address
string / required
IP address/Prefix of the neighbor or interface.
neighbor_affinity_group
dictionary
Configure an affinity group.
group_id
integer
Affinity Group ID.
password
dictionary
Configure a password for neighbor.
encryption
integer
0 specifies an UNENCRYPTED neighbor password.
3 specifies an 3DES ENCRYPTED neighbor password will follow.
7 specifies a Cisco type 7 ENCRYPTED neighbor password will follow.
key
string
Authentication password.
path_attribute
list / elements=dictionary
BGP path attribute optional filtering.
action
string
    Choices:
  • discard
  • treat-as-withdraw
Action.
range
dictionary
Path attribute range.
end
integer
Path attribute range end value.
start
integer
Path attribute range start value.
type
integer
Path attribute type
peer_type
string
    Choices:
  • fabric-border-leaf
  • fabric-external
Neighbor facing
remote_as
string
Specify Autonomous System Number of the neighbor.
remove_private_as
dictionary
Remove private AS number from outbound updates.
all
boolean
    Choices:
  • no
  • yes
All.
replace_as
boolean
    Choices:
  • no
  • yes
Replace.
set
boolean
    Choices:
  • no
  • yes
Remove private AS.
shutdown
boolean
    Choices:
  • no
  • yes
Administratively shutdown this neighbor.
timers
dictionary
Configure keepalive and hold timers.
holdtime
integer
Holdtime (seconds).
keepalive
integer
Keepalive interval (seconds).
transport
dictionary
BGP transport connection.
connection_mode
dictionary
Specify type of connection.
passive
boolean
    Choices:
  • no
  • yes
Allow passive connection setup only.
ttl_security
dictionary
Enable TTL Security Mechanism.
hops
integer
Specify hop count for remote peer.
update_source
string
Specify source of BGP session and updates.
nexthop
dictionary
Nexthop resolution options.
suppress_default_resolution
boolean
    Choices:
  • no
  • yes
Prohibit use of default route for nexthop address resolution.
rd
dictionary
Secondary Route Distinguisher for vxlan multisite border gateway.
dual
boolean
    Choices:
  • no
  • yes
Generate Secondary RD for all VRFs and L2VNIs.
id
integer
Specify 2 byte value for ID.
reconnect_interval
integer
Configure connection reconnect interval.
router_id
string
Specify the IP address to use as router-id.
shutdown
boolean
    Choices:
  • no
  • yes
Administratively shutdown BGP protocol.
suppress_fib_pending
boolean
    Choices:
  • no
  • yes
Advertise only routes that are programmed in hardware to peers.
timers
dictionary
Configure bgp related timers.
bestpath_limit
dictionary
Configure timeout for first bestpath after restart.
always
boolean
    Choices:
  • no
  • yes
Configure update-delay-always option.
timeout
integer
Bestpath timeout (seconds).
bgp
dictionary
Configure different bgp keepalive and holdtimes.
holdtime
integer
Holdtime (seconds).
keepalive
integer
Keepalive interval (seconds).
prefix_peer_timeout
integer
Prefix Peer timeout (seconds).
prefix_peer_wait
integer
Configure wait timer for a prefix peer.
vrfs
list / elements=dictionary
Virtual Router Context configurations.
allocate_index
integer
Configure allocate-index.
bestpath
dictionary
Define the default bestpath selection algorithm.
always_compare_med
boolean
    Choices:
  • no
  • yes
Compare MED on paths from different AS.
as_path
dictionary
AS-Path.
ignore
boolean
    Choices:
  • no
  • yes
Ignore AS-Path during bestpath selection.
multipath_relax
boolean
    Choices:
  • no
  • yes
Relax AS-Path restriction when choosing multipaths.
compare_neighborid
boolean
    Choices:
  • no
  • yes
When more paths are available than max path config, use neighborid as tie-breaker.
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare router-id for identical EBGP paths.
cost_community_ignore
boolean
    Choices:
  • no
  • yes
Ignore cost communities in bestpath selection.
igp_metric_ignore
boolean
    Choices:
  • no
  • yes
Ignore IGP metric for next-hop during bestpath selection.
med
dictionary
MED
confed
boolean
    Choices:
  • no
  • yes
Compare MED only from paths originated from within a confederation.
missing_as_worst
boolean
    Choices:
  • no
  • yes
Treat missing MED as highest MED.
non_deterministic
boolean
    Choices:
  • no
  • yes
Not always pick the best-MED path among paths from same AS.
cluster_id
string
Configure Route Reflector Cluster-ID.
confederation
dictionary
AS confederation parameters.
identifier
string
Set routing domain confederation AS.
peers
list / elements=string
Peer ASs in BGP confederation.
graceful_restart
dictionary
Configure Graceful Restart functionality.
helper
boolean
    Choices:
  • no
  • yes
Configure Graceful Restart Helper mode functionality.
restart_time
integer
Maximum time for restart advertised to peers.
set
boolean
    Choices:
  • no
  • yes
Enable graceful-restart.
stalepath_time
integer
Maximum time to keep a restarting peer's stale routes.
local_as
string
Specify the local-as for this vrf.
log_neighbor_changes
boolean
    Choices:
  • no
  • yes
Log a message for neighbor up/down event.
maxas_limit
integer
Allow AS-PATH attribute from EBGP neighbor imposing a limit on number of ASes.
neighbor_down
dictionary
Handle BGP neighbor down event, due to various reasons.
fib_accelerate
boolean
    Choices:
  • no
  • yes
Accelerate the hardware updates for IP/IPv6 adjacencies for neighbor.
neighbors
list / elements=dictionary
Configure BGP neighbors.
bfd
dictionary
Bidirectional Fast Detection for the neighbor.
multihop
dictionary
Multihop session.
interval
dictionary
Configure BFD session interval parameters.
min_rx_interval
integer
Minimum RX interval.
multiplier
integer
Detect Multiplier.
tx_interval
integer
TX interval in milliseconds.
set
boolean
    Choices:
  • no
  • yes
Set BFD multihop.
set
boolean
    Choices:
  • no
  • yes
Set BFD for this neighbor.
singlehop
boolean
    Choices:
  • no
  • yes
Single-hop session.
bmp_activate_server
integer
Specify server ID for activating BMP monitoring for the peer.
capability
dictionary
Capability.
suppress_4_byte_as
boolean
    Choices:
  • no
  • yes
Suppress 4-byte AS Capability.
description
string
Neighbor specific descripion.
disable_connected_check
boolean
    Choices:
  • no
  • yes
Disable check for directly connected peer.
dont_capability_negotiate
boolean
    Choices:
  • no
  • yes
Don't negotiate capability with this neighbor.
dscp
string
Set dscp value for tcp transport.
dynamic_capability
boolean
    Choices:
  • no
  • yes
Dynamic Capability
ebgp_multihop
integer
Specify multihop TTL for remote peer.
graceful_shutdown
dictionary
Graceful-shutdown for this neighbor.
activate
dictionary
Send graceful-shutdown community.
route_map
string
Apply route-map to modify attributes for outbound.
set
boolean
    Choices:
  • no
  • yes
Set activate.
inherit
dictionary
Inherit a template.
peer
string
Peer template to inherit.
peer_session
string
Peer-session template to inherit.
local_as
string
Specify the local-as number for the eBGP neighbor.
log_neighbor_changes
dictionary
Log message for neighbor up/down event.
disable
boolean
    Choices:
  • no
  • yes
Disable logging of neighbor up/down event.
set
boolean
    Choices:
  • no
  • yes
Set log-neighbor-changes.
low_memory
dictionary
Behaviour in low memory situations.
exempt
boolean
    Choices:
  • no
  • yes
Do not shutdown this peer when under memory pressure.
neighbor_address
string / required
IP address/Prefix of the neighbor or interface.
neighbor_affinity_group
dictionary
Configure an affinity group.
group_id
integer
Affinity Group ID.
password
dictionary
Configure a password for neighbor.
encryption
integer
0 specifies an UNENCRYPTED neighbor password.
3 specifies an 3DES ENCRYPTED neighbor password will follow.
7 specifies a Cisco type 7 ENCRYPTED neighbor password will follow.
key
string
Authentication password.
path_attribute
list / elements=dictionary
BGP path attribute optional filtering.
action
string
    Choices:
  • discard
  • treat-as-withdraw
Action.
range
dictionary
Path attribute range.
end
integer
Path attribute range end value.
start
integer
Path attribute range start value.
type
integer
Path attribute type
peer_type
string
    Choices:
  • fabric-border-leaf
  • fabric-external
Neighbor facing
remote_as
string
Specify Autonomous System Number of the neighbor.
remove_private_as
dictionary
Remove private AS number from outbound updates.
all
boolean
    Choices:
  • no
  • yes
All.
replace_as
boolean
    Choices:
  • no
  • yes
Replace.
set
boolean
    Choices:
  • no
  • yes
Remove private AS.
shutdown
boolean
    Choices:
  • no
  • yes
Administratively shutdown this neighbor.
timers
dictionary
Configure keepalive and hold timers.
holdtime
integer
Holdtime (seconds).
keepalive
integer
Keepalive interval (seconds).
transport
dictionary
BGP transport connection.
connection_mode
dictionary
Specify type of connection.
passive
boolean
    Choices:
  • no
  • yes
Allow passive connection setup only.
ttl_security
dictionary
Enable TTL Security Mechanism.
hops
integer
Specify hop count for remote peer.
update_source
string
Specify source of BGP session and updates.
reconnect_interval
integer
Configure connection reconnect interval.
router_id
string
Specify the IP address to use as router-id.
timers
dictionary
Configure bgp related timers.
bestpath_limit
dictionary
Configure timeout for first bestpath after restart.
always
boolean
    Choices:
  • no
  • yes
Configure update-delay-always option.
timeout
integer
Bestpath timeout (seconds).
bgp
dictionary
Configure different bgp keepalive and holdtimes.
holdtime
integer
Holdtime (seconds).
keepalive
integer
Keepalive interval (seconds).
prefix_peer_timeout
integer
Prefix Peer timeout (seconds).
prefix_peer_wait
integer
Configure wait timer for a prefix peer.
vrf
string
VRF name.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the NX-OS device by executing the command show running-config | section '^router bgp'.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • deleted
  • purged
  • parsed
  • gathered
  • rendered
The state the configuration should be left in.
State purged removes all the BGP configurations from the target device. Use caution with this state.
State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context.
Running states deleted and replaced will result in an error if there are address-family configuration lines present under a neighbor, or a vrf context that is to be removed. Please use the cisco.nxos.nxos_bgp_af or cisco.nxos.nxos_bgp_neighbor_af modules for prior cleanup.
States merged and replaced will result in a failure if BGP is already configured with a different ASN than what is provided in the task. In such cases, please use state purged to remove the existing BGP process and proceed further.
Refer to examples for more details.

Notes

Note

  • Tested against NX-OS 9.3.6.
  • Unsupported for Cisco MDS
  • This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# Nexus9000v#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_bgp_global:
    config:
      as_number: 65563
      router_id: 192.168.1.1
      bestpath:
        as_path:
          multipath_relax: True
        compare_neighborid: True
        cost_community_ignore: True
      confederation:
        identifier: 42
        peers:
          - 65020
          - 65030
          - 65040
      log_neighbor_changes: True
      maxas_limit: 20
      neighbors:
        - neighbor_address: 192.168.1.100
          neighbor_affinity_group:
            group_id: 160
          bmp_activate_server: 1
          remote_as: 65563
          description: NBR-1
          low_memory:
            exempt: True
        - neighbor_address: 192.168.1.101
          remote_as: 65563
          password:
            encryption: 7
            key: 12090404011C03162E
      neighbor_down:
        fib_accelerate: True
      vrfs:
        - vrf: site-1
          allocate_index: 5000
          local_as: 200
          log_neighbor_changes: True
          neighbors:
            - neighbor_address: 198.51.100.1
              description: site-1-nbr-1
              password:
                encryption: 3
                key: 13D4D3549493D2877B1DC116EE27A6BE
              remote_as: 65562
            - neighbor_address: 198.51.100.2
              remote_as: 65562
              description: site-1-nbr-2
        - vrf: site-2
          local_as: 300
          log_neighbor_changes: True
          neighbors:
            - neighbor_address: 203.0.113.2
              description: site-2-nbr-1
              password:
                encryption: 3
                key: AF92F4C16A0A0EC5BDF56CF58BC030F6
              remote_as: 65568
          neighbor_down:
            fib_accelerate: True

# Task output
# -------------
# before: {}
#
# commands:
#  - router bgp 65563
#  - bestpath as-path multipath-relax
#  - bestpath compare-neighborid
#  - bestpath cost-community ignore
#  - confederation identifier 42
#  - log-neighbor-changes
#  - maxas-limit 20
#  - neighbor-down fib-accelerate
#  - router-id 192.168.1.1
#  - confederation peers 65020 65030 65040
#  - neighbor 192.168.1.100
#  - remote-as 65563
#  - affinity-group 160
#  - bmp-activate-server 1
#  - description NBR-1
#  - low-memory exempt
#  - neighbor 192.168.1.101
#  - remote-as 65563
#  - password 7 12090404011C03162E
#  - vrf site-1
#  - allocate-index 5000
#  - local-as 200
#  - log-neighbor-changes
#  - neighbor 198.51.100.1
#  - remote-as 65562
#  - description site-1-nbr-1
#  - password 3 13D4D3549493D2877B1DC116EE27A6BE
#  - neighbor 198.51.100.2
#  - remote-as 65562
#  - description site-1-nbr-2
#  - vrf site-2
#  - local-as 300
#  - log-neighbor-changes
#  - neighbor-down fib-accelerate
#  - neighbor 203.0.113.2
#  - remote-as 65568
#  - description site-2-nbr-1
#  - password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6
#
# after:
#    as_number: '65563'
#    bestpath:
#      as_path:
#        multipath_relax: true
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65040'
#    log_neighbor_changes: true
#    maxas_limit: 20
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    - neighbor_address: 192.168.1.101
#      password:
#        encryption: 7
#        key: 12090404011C03162E
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - allocate_index: 5000
#      local_as: '200'
#      log_neighbor_changes: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 198.51.100.1
#        password:
#          encryption: 3
#          key: 13D4D3549493D2877B1DC116EE27A6BE
#        remote_as: '65562'
#      - description: site-1-nbr-2
#        neighbor_address: 198.51.100.2
#        remote_as: '65562'
#      vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - description: site-2-nbr-1
#        neighbor_address: 203.0.113.2
#        password:
#          encryption: 3
#          key: AF92F4C16A0A0EC5BDF56CF58BC030F6
#        remote_as: '65568'
#      vrf: site-2


# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65040
#   bestpath as-path multipath-relax
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 20
#   log-neighbor-changes
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   neighbor 192.168.1.101
#     remote-as 65563
#     password 7 12090404011C03162E
#   vrf site-1
#     local-as 200
#     log-neighbor-changes
#     allocate-index 5000
#     neighbor 198.51.100.1
#       remote-as 65562
#       description site-1-nbr-1
#       password 3 13D4D3549493D2877B1DC116EE27A6BE
#     neighbor 198.51.100.2
#       remote-as 65562
#       description site-1-nbr-2
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       remote-as 65568
#       description site-2-nbr-1
#       password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

# Using replaced

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65040
#   bestpath as-path multipath-relax
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 20
#   log-neighbor-changes
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   neighbor 192.168.1.101
#     remote-as 65563
#     password 7 12090404011C03162E
#   vrf site-1
#     local-as 200
#     log-neighbor-changes
#     allocate-index 5000
#     neighbor 198.51.100.1
#       remote-as 65562
#       description site-1-nbr-1
#       password 3 13D4D3549493D2877B1DC116EE27A6BE
#     neighbor 198.51.100.2
#       remote-as 65562
#       description site-1-nbr-2
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       remote-as 65568
#       description site-2-nbr-1
#       password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

- name: Replace BGP configuration with provided configuration
  cisco.nxos.nxos_bgp_global:
    config:
      as_number: 65563
      router_id: 192.168.1.1
      bestpath:
        compare_neighborid: True
        cost_community_ignore: True
      confederation:
        identifier: 42
        peers:
          - 65020
          - 65030
          - 65050
      maxas_limit: 40
      neighbors:
        - neighbor_address: 192.168.1.100
          neighbor_affinity_group:
            group_id: 160
          bmp_activate_server: 1
          remote_as: 65563
          description: NBR-1
          low_memory:
            exempt: True
      neighbor_down:
        fib_accelerate: True
      vrfs:
        - vrf: site-2
          local_as: 300
          log_neighbor_changes: True
          neighbors:
            - neighbor_address: 203.0.113.2
              password:
                encryption: 7
                key: 12090404011C03162E
          neighbor_down:
            fib_accelerate: True
    state: replaced

# Task output
# -------------
#  before:
#    as_number: '65563'
#    bestpath:
#      as_path:
#        multipath_relax: true
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65040'
#    log_neighbor_changes: true
#    maxas_limit: 20
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    - neighbor_address: 192.168.1.101
#      password:
#        encryption: 7
#        key: 12090404011C03162E
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - allocate_index: 5000
#      local_as: '200'
#      log_neighbor_changes: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 198.51.100.1
#        password:
#          encryption: 3
#          key: 13D4D3549493D2877B1DC116EE27A6BE
#        remote_as: '65562'
#      - description: site-1-nbr-2
#        neighbor_address: 198.51.100.2
#        remote_as: '65562'
#      vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - description: site-2-nbr-1
#        neighbor_address: 203.0.113.2
#        password:
#          encryption: 3
#          key: AF92F4C16A0A0EC5BDF56CF58BC030F6
#        remote_as: '65568'
#      vrf: site-2
#
# commands:
#  - router bgp 65563
#  - no bestpath as-path multipath-relax
#  - no log-neighbor-changes
#  - maxas-limit 40
#  - no confederation peers 65020 65030 65040
#  - confederation peers 65020 65030 65050
#  - no neighbor 192.168.1.101
#  - vrf site-2
#  - neighbor 203.0.113.2
#  - no remote-as 65568
#  - no description site-2-nbr-1
#  - password 7 12090404011C03162E
#  - no vrf site-1

#  after:
#    as_number: '65563'
#    bestpath:
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65050'
#    maxas_limit: 40
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - neighbor_address: 203.0.113.2
#        password:
#          encryption: 7
#          key: 12090404011C03162E
#      vrf: site-2
#
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65050
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 40
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       password 7 12090404011C03162E

# Using deleted

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65040
#   bestpath as-path multipath-relax
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 20
#   log-neighbor-changes
#   address-family ipv4 unicast
#     default-metric 400
#     suppress-inactive
#     default-information originate
#   address-family ipv6 multicast
#     wait-igp-convergence
#     redistribute eigrp eigrp-1 route-map site-1-rmap
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   neighbor 192.168.1.101
#     remote-as 65563
#     password 7 12090404011C03162E
#   vrf site-1
#     local-as 200
#     log-neighbor-changes
#     allocate-index 5000
#     address-family ipv4 multicast
#       maximum-paths 40
#       dampen-igp-metric 1200
#     neighbor 198.51.100.1
#       remote-as 65562
#       description site-1-nbr-1
#       password 3 13D4D3549493D2877B1DC116EE27A6BE
#     neighbor 198.51.100.2
#       remote-as 65562
#       description site-1-nbr-2
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       remote-as 65568
#       description site-1-nbr-1
#       password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

- name: Delete BGP configurations handled by this module
  cisco.nxos.nxos_bgp_global:
    state: deleted

# Task output
# -------------

# before:
#    as_number: '65563'
#    bestpath:
#      as_path:
#        multipath_relax: true
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65040'
#    log_neighbor_changes: true
#    maxas_limit: 20
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    - neighbor_address: 192.168.1.101
#      password:
#        encryption: 7
#        key: 12090404011C03162E
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - allocate_index: 5000
#      local_as: '200'
#      log_neighbor_changes: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 198.51.100.1
#        password:
#          encryption: 3
#          key: 13D4D3549493D2877B1DC116EE27A6BE
#        remote_as: '65562'
#      - description: site-1-nbr-2
#        neighbor_address: 198.51.100.2
#        remote_as: '65562'
#      vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 203.0.113.2
#        password:
#          encryption: 3
#          key: AF92F4C16A0A0EC5BDF56CF58BC030F6
#        remote_as: '65568'
#      vrf: site-2
#
# commands:
#   - router bgp 65563
#   - no bestpath as-path multipath-relax
#   - no bestpath compare-neighborid
#   - no bestpath cost-community ignore
#   - no confederation identifier 42
#   - no log-neighbor-changes
#   - no maxas-limit 20
#   - no neighbor-down fib-accelerate
#   - no router-id 192.168.1.1
#   - no confederation peers 65020 65030 65040
#   - no neighbor 192.168.1.100
#   - no neighbor 192.168.1.101
#   - no vrf site-1
#   - no vrf site-2
#
#  after:
#    as_number: '65563'
#
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   address-family ipv4 unicast
#     default-metric 400
#     suppress-inactive
#     default-information originate
#   address-family ipv6 multicast
#     wait-igp-convergence
#     redistribute eigrp eigrp-1 route-map site-1-rmap
#

# Using purged

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65040
#   bestpath as-path multipath-relax
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 20
#   log-neighbor-changes
#   address-family ipv4 unicast
#     default-metric 400
#     suppress-inactive
#     default-information originate
#   address-family ipv6 multicast
#     wait-igp-convergence
#     redistribute eigrp eigrp-1 route-map site-1-rmap
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   neighbor 192.168.1.101
#     remote-as 65563
#     password 7 12090404011C03162E
#   vrf site-1
#     local-as 200
#     log-neighbor-changes
#     allocate-index 5000
#     address-family ipv4 multicast
#       maximum-paths 40
#       dampen-igp-metric 1200
#     neighbor 198.51.100.1
#       remote-as 65562
#       description site-1-nbr-1
#       password 3 13D4D3549493D2877B1DC116EE27A6BE
#     neighbor 198.51.100.2
#       remote-as 65562
#       description site-1-nbr-2
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       remote-as 65568
#       description site-1-nbr-1
#       password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

- name: Purge all BGP configurations from the device
  cisco.nxos.nxos_bgp_global:
    state: purged

# Task output
# -------------

# before:
#    as_number: '65563'
#    bestpath:
#      as_path:
#        multipath_relax: true
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65040'
#    log_neighbor_changes: true
#    maxas_limit: 20
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    - neighbor_address: 192.168.1.101
#      password:
#        encryption: 7
#        key: 12090404011C03162E
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - allocate_index: 5000
#      local_as: '200'
#      log_neighbor_changes: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 198.51.100.1
#        password:
#          encryption: 3
#          key: 13D4D3549493D2877B1DC116EE27A6BE
#        remote_as: '65562'
#      - description: site-1-nbr-2
#        neighbor_address: 198.51.100.2
#        remote_as: '65562'
#      vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 203.0.113.2
#        password:
#          encryption: 3
#          key: AF92F4C16A0A0EC5BDF56CF58BC030F6
#        remote_as: '65568'
#      vrf: site-2
#
# commands:
#   - no router bgp 65563
#
#  after: {}
#
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# Nexus9000v#

# Using rendered

- name: Render platform specific configuration lines (without connecting to the device)
  cisco.nxos.nxos_bgp_global:
    config:
      as_number: 65563
      router_id: 192.168.1.1
      bestpath:
        as_path:
          multipath_relax: True
        compare_neighborid: True
        cost_community_ignore: True
      confederation:
        identifier: 42
        peers:
          - 65020
          - 65030
          - 65040
      log_neighbor_changes: True
      maxas_limit: 20
      neighbors:
        - neighbor_address: 192.168.1.100
          neighbor_affinity_group:
            group_id: 160
          bmp_activate_server: 1
          remote_as: 65563
          description: NBR-1
          low_memory:
            exempt: True
        - neighbor_address: 192.168.1.101
          remote_as: 65563
          password:
            encryption: 7
            key: 12090404011C03162E
      neighbor_down:
        fib_accelerate: True
      vrfs:
        - vrf: site-1
          allocate_index: 5000
          local_as: 200
          log_neighbor_changes: True
          neighbors:
            - neighbor_address: 198.51.100.1
              description: site-1-nbr-1
              password:
                encryption: 3
                key: 13D4D3549493D2877B1DC116EE27A6BE
              remote_as: 65562
            - neighbor_address: 198.51.100.2
              remote_as: 65562
              description: site-1-nbr-2
        - vrf: site-2
          local_as: 300
          log_neighbor_changes: True
          neighbors:
            - neighbor_address: 203.0.113.2
              description: site-1-nbr-1
              password:
                encryption: 3
                key: AF92F4C16A0A0EC5BDF56CF58BC030F6
              remote_as: 65568
          neighbor_down:
            fib_accelerate: True

# Task Output (redacted)
# -----------------------
# rendered:
#   - router bgp 65563
#   - bestpath as-path multipath-relax
#   - bestpath compare-neighborid
#   - bestpath cost-community ignore
#   - confederation identifier 42
#   - log-neighbor-changes
#   - maxas-limit 20
#   - neighbor-down fib-accelerate
#   - router-id 192.168.1.1
#   - confederation peers 65020 65030 65040
#   - neighbor 192.168.1.100
#   - remote-as 65563
#   - affinity-group 160
#   - bmp-activate-server 1
#   - description NBR-1
#   - low-memory exempt
#   - neighbor 192.168.1.101
#   - remote-as 65563
#   - password 7 12090404011C03162E
#   - vrf site-1
#   - allocate-index 5000
#   - local-as 200
#   - log-neighbor-changes
#   - neighbor 198.51.100.1
#   - remote-as 65562
#   - description site-1-nbr-1
#   - password 3 13D4D3549493D2877B1DC116EE27A6BE
#   - neighbor 198.51.100.2
#   - remote-as 65562
#   - description site-1-nbr-2
#   - vrf site-2
#   - local-as 300
#   - log-neighbor-changes
#   - neighbor-down fib-accelerate
#   - neighbor 203.0.113.2
#   - remote-as 65568
#   - description site-1-nbr-1
#   - password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

# Using parsed

# parsed.cfg
# ------------
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65040
#   bestpath as-path multipath-relax
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 20
#   log-neighbor-changes
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   neighbor 192.168.1.101
#     remote-as 65563
#     password 7 12090404011C03162E
#   vrf site-1
#     local-as 200
#     log-neighbor-changes
#     allocate-index 5000
#     neighbor 198.51.100.1
#       remote-as 65562
#       description site-1-nbr-1
#       password 3 13D4D3549493D2877B1DC116EE27A6BE
#     neighbor 198.51.100.2
#       remote-as 65562
#       description site-1-nbr-2
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       remote-as 65568
#       description site-1-nbr-1
#       password 3 AF92F4C16A0A0EC5BDF56CF58BC030F6

- name: Parse externally provided BGP config
  cisco.nxos.nxos_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
#  parsed:
#    as_number: '65563'
#    bestpath:
#      as_path:
#        multipath_relax: true
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65040'
#    log_neighbor_changes: true
#    maxas_limit: 20
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    - neighbor_address: 192.168.1.101
#      password:
#        encryption: 7
#        key: 12090404011C03162E
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - allocate_index: 5000
#      local_as: '200'
#      log_neighbor_changes: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 198.51.100.1
#        password:
#          encryption: 3
#          key: 13D4D3549493D2877B1DC116EE27A6BE
#        remote_as: '65562'
#      - description: site-1-nbr-2
#        neighbor_address: 198.51.100.2
#        remote_as: '65562'
#      vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - description: site-1-nbr-1
#        neighbor_address: 203.0.113.2
#        password:
#          encryption: 3
#          key: AF92F4C16A0A0EC5BDF56CF58BC030F6
#        remote_as: '65568'
#      vrf: site-2

# Using gathered

# existing config
#
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65563
#   router-id 192.168.1.1
#   confederation identifier 42
#   confederation peers 65020 65030 65050
#   bestpath cost-community ignore
#   bestpath compare-neighborid
#   neighbor-down fib-accelerate
#   maxas-limit 40
#   neighbor 192.168.1.100
#     low-memory exempt
#     bmp-activate-server 1
#     remote-as 65563
#     description NBR-1
#     affinity-group 160
#   vrf site-1
#   vrf site-2
#     local-as 300
#     neighbor-down fib-accelerate
#     log-neighbor-changes
#     neighbor 203.0.113.2
#       password 7 12090404011C03162E

- name: Gather BGP facts using gathered
  cisco.nxos.nxos_bgp_global:
    state: gathered

# Task output (redacted)
# -----------------------
#  gathered:
#    as_number: '65563'
#    bestpath:
#      compare_neighborid: true
#      cost_community_ignore: true
#    confederation:
#      identifier: '42'
#      peers:
#      - '65020'
#      - '65030'
#      - '65050'
#    maxas_limit: 40
#    neighbor_down:
#      fib_accelerate: true
#    neighbors:
#    - bmp_activate_server: 1
#      description: NBR-1
#      low_memory:
#        exempt: true
#      neighbor_address: 192.168.1.100
#      neighbor_affinity_group:
#        group_id: 160
#      remote_as: '65563'
#    router_id: 192.168.1.1
#    vrfs:
#    - vrf: site-1
#    - local_as: '300'
#      log_neighbor_changes: true
#      neighbor_down:
#        fib_accelerate: true
#      neighbors:
#      - neighbor_address: 203.0.113.2
#        password:
#          encryption: 7
#          key: 12090404011C03162E
#      vrf: site-2

# Remove a neighbor having AF configurations with state replaced (will fail)

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   log-neighbor-changes
#   maxas-limit 20
#   router-id 198.51.100.2
#   neighbor 203.0.113.2
#     address-family ipv4 unicast
#       next-hop-self
#     remote-as 65538
#     affinity-group 160
#     description NBR-1
#     low-memory exempt
#   neighbor 192.0.2.1
#     remote-as 65537
#     password 7 12090404011C03162E

- name: Remove a neighbor having AF configurations (should fail)
  cisco.nxos.nxos_bgp_global:
    config:
      as_number: 65536
      router_id: 198.51.100.2
      maxas_limit: 20
      log_neighbor_changes: True
      neighbors:
        - neighbor_address: 192.0.2.1
          remote_as: 65537
          password:
            encryption: 7
            key: 12090404011C03162E
    state: replaced

# Task output (redacted)
# -----------------------
# fatal: [Nexus9000v]: FAILED! => changed=false
#    msg: Neighbor 203.0.113.2 has address-family configurations.
#         Please use the nxos_bgp_neighbor_af module to remove those first.

# Remove a VRF having AF configurations with state replaced (will fail)

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   log-neighbor-changes
#   maxas-limit 20
#   router-id 198.51.100.2
#   neighbor 192.0.2.1
#     remote-as 65537
#     password 7 12090404011C03162E
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#     neighbor 203.0.113.2
#       remote-as 65538
#       affinity-group 160
#       description NBR-1
#       low-memory exempt
#   vrf site-2
#     neighbor-down fib-accelerate

- name: Remove a VRF having AF configurations (should fail)
  cisco.nxos.nxos_bgp_global:
    config:
      as_number: 65536
      router_id: 198.51.100.2
      maxas_limit: 20
      log_neighbor_changes: True
      neighbors:
        - neighbor_address: 192.0.2.1
          remote_as: 65537
          password:
            encryption: 7
            key: 12090404011C03162E
      vrfs:
        - vrf: site-2
          neighbor_down:
            fib_accelerate: True
    state: replaced

# Task output (redacted)
# -----------------------
# fatal: [Nexus9000v]: FAILED! => changed=false
#    msg: VRF site-1 has address-family configurations.
#         Please use the nxos_bgp_af module to remove those first.

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['router bgp 65563', 'maxas-limit 20', 'router-id 192.168.1.1', 'confederation peers 65020 65030 65040', 'neighbor 192.168.1.100', 'remote-as 65563', 'affinity-group 160', 'bmp-activate-server 1', 'description NBR-1', 'low-memory exempt', 'vrf site-1', 'log-neighbor-changes', 'neighbor 198.51.100.1', 'remote-as 65562', 'description site-1-nbr-1', 'password 3 13D4D3549493D2877B1DC116EE27A6BE']


Authors

  • Nilashish Chakraborty (@NilashishC)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_bgp_global_module.html