Note
This plugin is part of the cisco.nxos collection (version 2.7.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.nxos.
To use it in a playbook, specify: cisco.nxos.nxos_l3_interface.
New in version 1.0.0: of cisco.nxos
major release after 2022-06-01
Updated modules released with more functionality
nxos_l3_interfaces
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| aggregate list / elements=dictionary | List of L3 interfaces definitions. | ||
| ipv4 string | IPv4 of the L3 interface. | ||
| ipv6 string | IPv6 of the L3 interface. | ||
| name string | Name of the L3 interface. | ||
| state string |
| State of the L3 interface configuration. | |
| ipv4 string | IPv4 of the L3 interface. | ||
| ipv6 string | IPv6 of the L3 interface. | ||
| name string | Name of the L3 interface. | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli.Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.This option will be removed in a release after 2022-06-01. For more information please see the https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html. A dict object containing connection details. | ||
| auth_pass string | Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead. | ||
| authorize boolean |
| Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead. | |
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443). | ||
| ssh_keyfile string | Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc). | ||
| transport string |
| Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. | |
| use_proxy boolean |
| If no, the environment variables http_proxy and https_proxy will be ignored. | |
| use_ssl boolean |
| Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored. | |
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| validate_certs boolean |
| If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. | |
| state string |
| State of the L3 interface configuration. | |
Note
- name: Set interface IPv4 address
cisco.nxos.nxos_l3_interface:
name: Ethernet2/3
ipv4: 192.168.0.1/24
- name: Remove interface IPv4 address
cisco.nxos.nxos_l3_interface:
name: Ethernet2/3
state: absent
- name: Set IP addresses on aggregate
cisco.nxos.nxos_l3_interface:
aggregate:
- {name: "Ethernet2/1", ipv4: "192.168.2.10/24"}
- {name: "Ethernet2/5", ipv4: "192.168.3.10/24", ipv6: "fd5d:12c9:2201:1::1/64"}
- name: Remove IP addresses on aggregate
cisco.nxos.nxos_l3_interface:
aggregate:
- {name: "Ethernet2/1", ipv4: "192.168.2.10/24"}
- {name: "Ethernet2/5", ipv4: "192.168.3.10/24", ipv6: "fd5d:12c9:2201:1::1/64"}
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list / elements=string | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device Sample: ['interface ethernet2/3', 'no switchport', 'ip address 192.168.22.1/24', 'ipv6 address "fd5d:12c9:2201:1::1/64"', 'no ip address 192.168.22.1/24'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_l3_interface_module.html