W3cubDocs

/Ansible

cisco.nxos.nxos_nxapi – Manage NXAPI configuration on an NXOS device.

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_nxapi.

New in version 1.0.0: of cisco.nxos

Synopsis

  • Configures the NXAPI feature on devices running Cisco NXOS. The NXAPI feature is absent from the configuration by default. Since this module manages the NXAPI feature it only supports the use of the Cli transport.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
http
boolean
    Choices:
  • no
  • yes
Controls the operating state of the HTTP protocol as one of the underlying transports for NXAPI. By default, NXAPI will enable the HTTP transport when the feature is first configured. To disable the use of the HTTP transport, set the value of this argument to False.

aliases: enable_http
http_port
integer
Default:
80
Configure the port with which the HTTP server will listen on for requests. By default, NXAPI will bind the HTTP service to the standard HTTP port 80. This argument accepts valid port values in the range of 1 to 65535.
https
boolean
    Choices:
  • no
  • yes
Controls the operating state of the HTTPS protocol as one of the underlying transports for NXAPI. By default, NXAPI will disable the HTTPS transport when the feature is first configured. To enable the use of the HTTPS transport, set the value of this argument to True.

aliases: enable_https
https_port
integer
Default:
443
Configure the port with which the HTTPS server will listen on for requests. By default, NXAPI will bind the HTTPS service to the standard HTTPS port 443. This argument accepts valid port values in the range of 1 to 65535.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
sandbox
boolean
    Choices:
  • no
  • yes
The NXAPI feature provides a web base UI for developers for entering commands. This feature is initially disabled when the NXAPI feature is configured for the first time. When the sandbox argument is set to True, the developer sandbox URL will accept requests and when the value is set to False, the sandbox URL is unavailable. This is supported on NX-OS 7K series.

aliases: enable_sandbox
ssl_strong_ciphers
boolean
    Choices:
  • no
  • yes
Controls the use of whether strong or weak ciphers are configured. By default, this feature is disabled and weak ciphers are configured. To enable the use of strong ciphers, set the value of this argument to True.
state
string
    Choices:
  • present
  • absent
The state argument controls whether or not the NXAPI feature is configured on the remote device. When the value is present the NXAPI feature configuration is present in the device running-config. When the values is absent the feature configuration is removed from the running-config.
tlsv1_0
boolean
    Choices:
  • no
  • yes
Controls the use of the Transport Layer Security version 1.0 is configured. By default, this feature is enabled. To disable the use of TLSV1.0, set the value of this argument to True.
tlsv1_1
boolean
    Choices:
  • no
  • yes
Controls the use of the Transport Layer Security version 1.1 is configured. By default, this feature is disabled. To enable the use of TLSV1.1, set the value of this argument to True.
tlsv1_2
boolean
    Choices:
  • no
  • yes
Controls the use of the Transport Layer Security version 1.2 is configured. By default, this feature is disabled. To enable the use of TLSV1.2, set the value of this argument to True.

Notes

Note

Examples

- name: Enable NXAPI access with default configuration
  cisco.nxos.nxos_nxapi:
    state: present

- name: Enable NXAPI with no HTTP, HTTPS at port 9443 and sandbox disabled
  cisco.nxos.nxos_nxapi:
    enable_http: false
    https_port: 9443
    https: yes
    enable_sandbox: no

- name: remove NXAPI configuration
  cisco.nxos.nxos_nxapi:
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
updates
list / elements=string
always
Returns the list of commands that need to be pushed into the remote device to satisfy the arguments

Sample:
['no feature nxapi']


Authors

  • Peter Sprygada (@privateip)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_nxapi_module.html