Note
This plugin is part of the cisco.nxos collection (version 2.7.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.nxos.
To use it in a playbook, specify: cisco.nxos.nxos_ospf_interfaces.
New in version 1.3.0: of cisco.nxos
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config list / elements=dictionary | A list of OSPF configuration for interfaces. | |||||
| address_family list / elements=dictionary | OSPF settings on the interfaces in address-family context. | |||||
| afi string / required |
| Address Family Identifier (AFI) for OSPF settings on the interfaces. | ||||
| authentication dictionary | Authentication settings on the interface. | |||||
| enable boolean |
| Enable/disable authentication on the interface. | ||||
| key_chain string | Authentication password key-chain. | |||||
| message_digest boolean |
| Use message-digest authentication. | ||||
| null_auth boolean |
| Use null(disable) authentication. | ||||
| authentication_key dictionary | Configure the authentication key for the interface. | |||||
| encryption integer | 0 Specifies an UNENCRYPTED authentication key will follow. 3 Specifies an 3DES ENCRYPTED authentication key will follow. 7 Specifies a Cisco type 7 ENCRYPTED authentication key will follow. | |||||
| key string / required | Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. | |||||
| cost integer | Cost associated with interface. | |||||
| dead_interval integer | Dead interval value (in seconds). | |||||
| default_passive_interface boolean |
| Set passive-interface attribute on this interface to default. This option is mutually exclusive with passive_interface. | ||||
| hello_interval integer | Hello interval value (in seconds). | |||||
| instance integer | Instance identifier. | |||||
| message_digest_key dictionary | Message digest authentication password (key) settings. | |||||
| encryption integer | 0 Specifies an UNENCRYPTED ospf password (key) will follow. 3 Specifies an 3DES ENCRYPTED ospf password (key) will follow. 7 Specifies a Cisco type 7 ENCRYPTED the ospf password (key) will follow. | |||||
| key string / required | Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. | |||||
| key_id integer / required | Key ID. | |||||
| mtu_ignore boolean |
| Enable/disable OSPF MTU mismatch detection. | ||||
| multi_areas list / elements=string | Multi-Areas associated with interface (not tied to OSPF process). Valid values are Area Ids as an integer or IP address. | |||||
| network string |
| Network type. | ||||
| passive_interface boolean |
| Suppress routing updates on the interface. This option is mutually exclusive with default_passive_interface. | ||||
| priority integer | Router priority. | |||||
| processes list / elements=dictionary | Interfaces configuration for an OSPF process. | |||||
| area dictionary | Area associated with interface. | |||||
| area_id string / required | Area ID in IP address format. | |||||
| secondaries boolean |
| Do not include secondary IPv4/IPv6 addresses. | ||||
| multi_areas list / elements=string | Multi-Areas associated with interface. Valid values are Area Ids as an integer or IP address. | |||||
| process_id string / required | OSPF process tag. | |||||
| retransmit_interval integer | Packet retransmission interval. | |||||
| shutdown boolean |
| Shutdown OSPF on this interface. | ||||
| transmit_delay integer | Packet transmission delay. | |||||
| name string / required | Name/Identifier of the interface. | |||||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section "^interface". The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | |||||
| state string |
| The state the configuration should be left in. | ||||
Note
# Using merged
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
- name: Merge the provided configuration with the existing running configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: "200"
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: "300"
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: True
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: True
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: merged
# Task output
# -------------
# "before": [
# {
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.11",
# "ip router ospf 100 area 1.1.1.1 secondaries none",
# "ipv6 router ospfv3 multi-area 16.10.10.10",
# "ipv6 router ospfv3 200 area 2.2.2.2",
# "ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "ip ospf authentication key-chain test-1",
# "ip ospf authentication",
# "ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "ip ospf cost 100",
# "ospfv3 network broadcast",
# "ospfv3 shutdown",
# "interface Ethernet1/3",
# "ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using replaced
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Replace OSPF configurations of listed interfaces with provided configurations
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.12
- name: Ethernet1/3
state: replaced
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.12",
# "no ip router ospf multi-area 11.11.11.11",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
#
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Using overridden
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Override all OSPF interfaces configuration with provided configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.12
state: overridden
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/2",
# "no ip ospf authentication key-chain test-1",
# "no ip ospf authentication",
# "no ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "no ip ospf cost 100",
# "no ospfv3 network broadcast",
# "no ospfv3 shutdown",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E",
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.12",
# "no ip router ospf multi-area 11.11.11.11",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50"
# ]
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using deleted to delete OSPF config of a single interface
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from a single interface
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
state: deleted
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "no ip router ospf multi-area 11.11.11.11",
# "no ip router ospf 100 area 1.1.1.1 secondaries none",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50"
# ]
#
# "before": [
# {
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using deleted to delete OSPF config from all interfaces
# Before state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from all interfaces
cisco.nxos.nxos_ospf_interfaces:
state: deleted
# Task output
# -------------
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
#
# "commands": [
# "interface Ethernet1/1",
# "no ip router ospf multi-area 11.11.11.11",
# "no ip router ospf 100 area 1.1.1.1 secondaries none",
# "no ipv6 router ospfv3 multi-area 16.10.10.10",
# "no ipv6 router ospfv3 200 area 2.2.2.2",
# "no ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "no ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "no ip ospf authentication key-chain test-1",
# "no ip ospf authentication",
# "no ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "no ip ospf cost 100",
# "no ospfv3 network broadcast",
# "no ospfv3 shutdown",
# "interface Ethernet1/3",
# "no ip ospf authentication-key 7 12090404011C03162E"
# ]
#
# "after": [
# {
# "name": "Ethernet1/1"
# },
# {
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
# ]
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using rendered
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: False
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: "200"
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: "300"
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: True
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: True
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
# "interface Ethernet1/1",
# "ip router ospf multi-area 11.11.11.11",
# "ip router ospf 100 area 1.1.1.1 secondaries none",
# "ipv6 router ospfv3 multi-area 16.10.10.10",
# "ipv6 router ospfv3 200 area 2.2.2.2",
# "ipv6 router ospfv3 200 multi-area 21.0.0.0",
# "ipv6 router ospfv3 300 multi-area 50.50.50.50",
# "interface Ethernet1/2",
# "ip ospf authentication key-chain test-1",
# "ip ospf authentication",
# "ip ospf message-digest-key 10 md5 3 abc01d272be25d29",
# "ip ospf cost 100",
# "ospfv3 network broadcast",
# "ospfv3 shutdown",
# "interface Ethernet1/3",
# "ip ospf authentication-key 7 12090404011C03162E"
# ]
# Using parsed
# parsed.cfg
# ------------
# interface Ethernet1/1
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# ipv6 router ospfv3 multi-area 16.10.10.10
# interface Ethernet1/2
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# ip ospf authentication-key 7 12090404011C03162E
- name: arse externally provided OSPF interfaces config
cisco.nxos.nxos_ospf_interfaces:
running_config: "{{ lookup('file', 'ospf_interfaces.cfg') }}"
state: parsed
# Task output (redacted)
# -----------------------
# "parsed": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.11"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# },
# {
# "afi": "ipv6",
# "multi_areas": [
# "16.10.10.10"
# ],
# "processes": [
# {
# "area": {
# "area_id": "2.2.2.2"
# },
# "multi_areas": [
# "21.0.0.0"
# ],
# "process_id": "200"
# },
# {
# "multi_areas": [
# "50.50.50.50"
# ],
# "process_id": "300"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication_key": {
# "encryption": 7,
# "key": "12090404011C03162E"
# }
# }
# ],
# "name": "Ethernet1/3"
# },
# ]
# Using gathered
# On-box config
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Task output (redacted)
# -----------------------
# "gathered": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "multi_areas": [
# "11.11.11.12"
# ],
# "processes": [
# {
# "area": {
# "area_id": "1.1.1.1",
# "secondaries": false
# },
# "process_id": "100"
# }
# ]
# }
# ],
# "name": "Ethernet1/1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "enable": true,
# "key_chain": "test-1"
# },
# "cost": 100,
# "message_digest_key": {
# "encryption": 3,
# "key": "abc01d272be25d29",
# "key_id": 10
# }
# },
# {
# "afi": "ipv6",
# "network": "broadcast",
# "shutdown": true
# }
# ],
# "name": "Ethernet1/2"
# },
# {
# "name": "Ethernet1/3"
# },
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list / elements=string | when changed | The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list / elements=string | always | The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list / elements=string | always | The set of commands pushed to the remote device. Sample: ['interface Ethernet1/1', 'ip router ospf multi-area 11.11.11.11', 'ip router ospf 100 area 1.1.1.1 secondaries none', 'no ipv6 router ospfv3 multi-area 16.10.10.10', 'ipv6 router ospfv3 200 area 2.2.2.2', 'ipv6 router ospfv3 200 multi-area 21.0.0.0', 'ipv6 router ospfv3 300 multi-area 50.50.50.50', 'interface Ethernet1/2', 'no ip ospf authentication key-chain test-1', 'ip ospf authentication'] |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_ospf_interfaces_module.html