W3cubDocs

/Ansible

community.fortios.fmgr_fwpol_ipv4 – Allows the add/delete of Firewall Policies on Packages in FortiManager.

Note

This plugin is part of the community.fortios collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.fortios.

To use it in a playbook, specify: community.fortios.fmgr_fwpol_ipv4.

Synopsis

  • Allows the add/delete of Firewall Policies on Packages in FortiManager.

Parameters

Parameter Choices/Defaults Comments
action
string
    Choices:
  • deny
  • accept
  • ipsec
Policy action (allow/deny/ipsec).
choice | deny | Blocks sessions that match the firewall policy.
choice | accept | Allows session that match the firewall policy.
choice | ipsec | Firewall policy becomes a policy-based IPsec VPN policy.
adom
string
Default:
"root"
The ADOM the configuration should belong to.
app_category
string
Application category ID list.
app_group
string
Application group names.
application
string
Application ID list.
application_list
string
Name of an existing Application list.
auth_cert
string
HTTPS server certificate for policy authentication.
auth_path
string
    Choices:
  • disable
  • enable
Enable/disable authentication-based routing.
choice | disable | Disable authentication-based routing.
choice | enable | Enable authentication-based routing.
auth_redirect_addr
string
HTTP-to-HTTPS redirect address for firewall authentication.
auto_asic_offload
string
    Choices:
  • disable
  • enable
Enable/disable offloading security profile processing to CP processors.
choice | disable | Disable ASIC offloading.
choice | enable | Enable auto ASIC offloading.
av_profile
string
Name of an existing Antivirus profile.
block_notification
string
    Choices:
  • disable
  • enable
Enable/disable block notification.
choice | disable | Disable setting.
choice | enable | Enable setting.
captive_portal_exempt
string
    Choices:
  • disable
  • enable
Enable to exempt some users from the captive portal.
choice | disable | Disable exemption of captive portal.
choice | enable | Enable exemption of captive portal.
capture_packet
string
    Choices:
  • disable
  • enable
Enable/disable capture packets.
choice | disable | Disable capture packets.
choice | enable | Enable capture packets.
comments
string
Comment.
custom_log_fields
string
Custom fields to append to log messages for this policy.
delay_tcp_npu_session
string
    Choices:
  • disable
  • enable
Enable TCP NPU session delay to guarantee packet order of 3-way handshake.
choice | disable | Disable TCP NPU session delay in order to guarantee packet order of 3-way handshake.
choice | enable | Enable TCP NPU session delay in order to guarantee packet order of 3-way handshake.
devices
string
Names of devices or device groups that can be matched by the policy.
diffserv_forward
string
    Choices:
  • disable
  • enable
Enable to change packet's DiffServ values to the specified diffservcode-forward value.
choice | disable | Disable WAN optimization.
choice | enable | Enable WAN optimization.
diffserv_reverse
string
    Choices:
  • disable
  • enable
Enable to change packet's reverse (reply) DiffServ values to the specified diffservcode-rev value.
choice | disable | Disable setting.
choice | enable | Enable setting.
diffservcode_forward
string
Change packet's DiffServ to this value.
diffservcode_rev
string
Change packet's reverse (reply) DiffServ to this value.
disclaimer
string
    Choices:
  • disable
  • enable
Enable/disable user authentication disclaimer.
choice | disable | Disable user authentication disclaimer.
choice | enable | Enable user authentication disclaimer.
dlp_sensor
string
Name of an existing DLP sensor.
dnsfilter_profile
string
Name of an existing DNS filter profile.
dscp_match
string
    Choices:
  • disable
  • enable
Enable DSCP check.
choice | disable | Disable DSCP check.
choice | enable | Enable DSCP check.
dscp_negate
string
    Choices:
  • disable
  • enable
Enable negated DSCP match.
choice | disable | Disable DSCP negate.
choice | enable | Enable DSCP negate.
dscp_value
string
DSCP value.
dsri
string
    Choices:
  • disable
  • enable
Enable DSRI to ignore HTTP server responses.
choice | disable | Disable DSRI.
choice | enable | Enable DSRI.
dstaddr
string
Destination address and address group names.
dstaddr_negate
string
    Choices:
  • disable
  • enable
When enabled dstaddr specifies what the destination address must NOT be.
choice | disable | Disable destination address negate.
choice | enable | Enable destination address negate.
dstintf
string
Outgoing (egress) interface.
fail_on_missing_dependency
string
    Choices:
  • enable
  • disable ←
Normal behavior is to "skip" tasks that fail dependency checks, so other tasks can run.
If set to "enabled" if a failed dependency check happeens, Ansible will exit as with failure instead of skip.
firewall_session_dirty
string
    Choices:
  • check-all
  • check-new
How to handle sessions if the configuration of this firewall policy changes.
choice | check-all | Flush all current sessions accepted by this policy.
choice | check-new | Continue to allow sessions already accepted by this policy.
fixedport
string
    Choices:
  • disable
  • enable
Enable to prevent source NAT from changing a session's source port.
choice | disable | Disable setting.
choice | enable | Enable setting.
fsso
string
    Choices:
  • disable
  • enable
Enable/disable Fortinet Single Sign-On.
choice | disable | Disable setting.
choice | enable | Enable setting.
fsso_agent_for_ntlm
string
FSSO agent to use for NTLM authentication.
global_label
string
Label for the policy that appears when the GUI is in Global View mode.
groups
string
Names of user groups that can authenticate with this policy.
gtp_profile
string
GTP profile.
icap_profile
string
Name of an existing ICAP profile.
identity_based_route
string
Name of identity-based routing rule.
inbound
string
    Choices:
  • disable
  • enable
Policy-based IPsec VPN | only traffic from the remote network can initiate a VPN.
choice | disable | Disable setting.
choice | enable | Enable setting.
internet_service
string
    Choices:
  • disable
  • enable
Enable/disable use of Internet Services for this policy. If enabled, dstaddr and service are not used.
choice | disable | Disable use of Internet Services in policy.
choice | enable | Enable use of Internet Services in policy.
internet_service_custom
string
Custom Internet Service name.
internet_service_id
string
Internet Service ID.
internet_service_negate
string
    Choices:
  • disable
  • enable
When enabled internet-service specifies what the service must NOT be.
choice | disable | Disable negated Internet Service match.
choice | enable | Enable negated Internet Service match.
internet_service_src
string
    Choices:
  • disable
  • enable
Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.
choice | disable | Disable use of Internet Services source in policy.
choice | enable | Enable use of Internet Services source in policy.
internet_service_src_custom
string
Custom Internet Service source name.
internet_service_src_id
string
Internet Service source ID.
internet_service_src_negate
string
    Choices:
  • disable
  • enable
When enabled internet-service-src specifies what the service must NOT be.
choice | disable | Disable negated Internet Service source match.
choice | enable | Enable negated Internet Service source match.
ippool
string
    Choices:
  • disable
  • enable
Enable to use IP Pools for source NAT.
choice | disable | Disable setting.
choice | enable | Enable setting.
ips_sensor
string
Name of an existing IPS sensor.
label
string
Label for the policy that appears when the GUI is in Section View mode.
learning_mode
string
    Choices:
  • disable
  • enable
Enable to allow everything, but log all of the meaningful data for security information gathering.
choice | disable | Disable learning mode in firewall policy.
choice | enable | Enable learning mode in firewall policy.
logtraffic
string
    Choices:
  • disable
  • all
  • utm
Enable or disable logging. Log all sessions or security profile sessions.
choice | disable | Disable all logging for this policy.
choice | all | Log all sessions accepted or denied by this policy.
choice | utm | Log traffic that has a security profile applied to it.
logtraffic_start
string
    Choices:
  • disable
  • enable
Record logs when a session starts and ends.
choice | disable | Disable setting.
choice | enable | Enable setting.
match_vip
string
    Choices:
  • disable
  • enable
Enable to match packets that have had their destination addresses changed by a VIP.
choice | disable | Do not match DNATed packet.
choice | enable | Match DNATed packet.
mms_profile
string
Name of an existing MMS profile.
mode
string
    Choices:
  • add ←
  • set
  • delete
  • update
Sets one of three modes for managing the object.
Allows use of soft-adds instead of overwriting existing values
name
string
Policy name.
nat
string
    Choices:
  • disable
  • enable
Enable/disable source NAT.
choice | disable | Disable setting.
choice | enable | Enable setting.
natinbound
string
    Choices:
  • disable
  • enable
Policy-based IPsec VPN | apply destination NAT to inbound traffic.
choice | disable | Disable setting.
choice | enable | Enable setting.
natip
string
Policy-based IPsec VPN | source NAT IP address for outgoing traffic.
natoutbound
string
    Choices:
  • disable
  • enable
Policy-based IPsec VPN | apply source NAT to outbound traffic.
choice | disable | Disable setting.
choice | enable | Enable setting.
np_acceleration
string
    Choices:
  • disable
  • enable
Enable/disable UTM Network Processor acceleration.
choice | disable | Disable UTM Network Processor acceleration.
choice | enable | Enable UTM Network Processor acceleration.
ntlm
string
    Choices:
  • disable
  • enable
Enable/disable NTLM authentication.
choice | disable | Disable setting.
choice | enable | Enable setting.
ntlm_enabled_browsers
string
HTTP-User-Agent value of supported browsers.
ntlm_guest
string
    Choices:
  • disable
  • enable
Enable/disable NTLM guest user access.
choice | disable | Disable setting.
choice | enable | Enable setting.
outbound
string
    Choices:
  • disable
  • enable
Policy-based IPsec VPN | only traffic from the internal network can initiate a VPN.
choice | disable | Disable setting.
choice | enable | Enable setting.
package_name
string
Default:
"default"
The policy package you want to modify
per_ip_shaper
string
Per-IP traffic shaper.
permit_any_host
string
    Choices:
  • disable
  • enable
Accept UDP packets from any host.
choice | disable | Disable setting.
choice | enable | Enable setting.
permit_stun_host
string
    Choices:
  • disable
  • enable
Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host.
choice | disable | Disable setting.
choice | enable | Enable setting.
policyid
string
Policy ID.
poolname
string
IP Pool names.
profile_group
string
Name of profile group.
profile_protocol_options
string
Name of an existing Protocol options profile.
profile_type
string
    Choices:
  • single
  • group
Determine whether the firewall policy allows security profile groups or single profiles only.
choice | single | Do not allow security profile groups.
choice | group | Allow security profile groups.
radius_mac_auth_bypass
string
    Choices:
  • disable
  • enable
Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server.
choice | disable | Disable MAC authentication bypass.
choice | enable | Enable MAC authentication bypass.
redirect_url
string
URL users are directed to after seeing and accepting the disclaimer or authenticating.
replacemsg_override_group
string
Override the default replacement message group for this policy.
rsso
string
    Choices:
  • disable
  • enable
Enable/disable RADIUS single sign-on (RSSO).
choice | disable | Disable setting.
choice | enable | Enable setting.
rtp_addr
string
Address names if this is an RTP NAT policy.
rtp_nat
string
    Choices:
  • disable
  • enable
Enable Real Time Protocol (RTP) NAT.
choice | disable | Disable setting.
choice | enable | Enable setting.
scan_botnet_connections
string
    Choices:
  • disable
  • block
  • monitor
Block or monitor connections to Botnet servers or disable Botnet scanning.
choice | disable | Do not scan connections to botnet servers.
choice | block | Block connections to botnet servers.
choice | monitor | Log connections to botnet servers.
schedule
string
Schedule name.
schedule_timeout
string
    Choices:
  • disable
  • enable
Enable to force current sessions to end when the schedule object times out.
choice | disable | Disable schedule timeout.
choice | enable | Enable schedule timeout.
send_deny_packet
string
    Choices:
  • disable
  • enable
Enable to send a reply when a session is denied or blocked by a firewall policy.
choice | disable | Disable deny-packet sending.
choice | enable | Enable deny-packet sending.
service
string
Service and service group names.
service_negate
string
    Choices:
  • disable
  • enable
When enabled service specifies what the service must NOT be.
choice | disable | Disable negated service match.
choice | enable | Enable negated service match.
session_ttl
string
TTL in seconds for sessions accepted by this policy (0 means use the system default session TTL).
spamfilter_profile
string
Name of an existing Spam filter profile.
srcaddr
string
Source address and address group names.
srcaddr_negate
string
    Choices:
  • disable
  • enable
When enabled srcaddr specifies what the source address must NOT be.
choice | disable | Disable source address negate.
choice | enable | Enable source address negate.
srcintf
string
Incoming (ingress) interface.
ssh_filter_profile
string
Name of an existing SSH filter profile.
ssl_mirror
string
    Choices:
  • disable
  • enable
Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring).
choice | disable | Disable SSL mirror.
choice | enable | Enable SSL mirror.
ssl_mirror_intf
string
SSL mirror interface name.
ssl_ssh_profile
string
Name of an existing SSL SSH profile.
status
string
    Choices:
  • disable
  • enable
Enable or disable this policy.
choice | disable | Disable setting.
choice | enable | Enable setting.
tcp_mss_receiver
string
Receiver TCP maximum segment size (MSS).
tcp_mss_sender
string
Sender TCP maximum segment size (MSS).
tcp_session_without_syn
string
    Choices:
  • all
  • data-only
  • disable
Enable/disable creation of TCP session without SYN flag.
choice | all | Enable TCP session without SYN.
choice | data-only | Enable TCP session data only.
choice | disable | Disable TCP session without SYN.
timeout_send_rst
string
    Choices:
  • disable
  • enable
Enable/disable sending RST packets when TCP sessions expire.
choice | disable | Disable sending of RST packet upon TCP session expiration.
choice | enable | Enable sending of RST packet upon TCP session expiration.
traffic_shaper
string
Traffic shaper.
traffic_shaper_reverse
string
Reverse traffic shaper.
url_category
string
URL category ID list.
users
string
Names of individual users that can authenticate with this policy.
utm_status
string
    Choices:
  • disable
  • enable
Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.
choice | disable | Disable setting.
choice | enable | Enable setting.
vlan_cos_fwd
string
VLAN forward direction user priority | 255 passthrough, 0 lowest, 7 highest.
vlan_cos_rev
string
VLAN reverse direction user priority | 255 passthrough, 0 lowest, 7 highest..
vlan_filter
string
Set VLAN filters.
voip_profile
string
Name of an existing VoIP profile.
vpn_dst_node
string
EXPERTS ONLY! KNOWLEDGE OF FMGR JSON API IS REQUIRED!
List of multiple child objects to be added. Expects a list of dictionaries.
Dictionaries must use FortiManager API parameters, not the ansible ones listed below.
If submitted, all other prefixed sub-parameters ARE IGNORED. This object is MUTUALLY EXCLUSIVE with its options.
We expect that you know what you are doing with these list parameters, and are leveraging the JSON API Guide.
vpn_dst_node_host
string
VPN Destination Node Host.
vpn_dst_node_seq
string
VPN Destination Node Seq.
vpn_dst_node_subnet
string
VPN Destination Node Seq.
vpn_src_node
string
EXPERTS ONLY! KNOWLEDGE OF FMGR JSON API IS REQUIRED!
List of multiple child objects to be added. Expects a list of dictionaries.
Dictionaries must use FortiManager API parameters, not the ansible ones listed below.
If submitted, all other prefixed sub-parameters ARE IGNORED. This object is MUTUALLY EXCLUSIVE with its options.
We expect that you know what you are doing with these list parameters, and are leveraging the JSON API Guide.
vpn_src_node_host
string
VPN Source Node Host.
vpn_src_node_seq
string
VPN Source Node Seq.
vpn_src_node_subnet
string
VPN Source Node.
vpntunnel
string
Policy-based IPsec VPN | name of the IPsec VPN Phase 1.
waf_profile
string
Name of an existing Web application firewall profile.
wanopt
string
    Choices:
  • disable
  • enable
Enable/disable WAN optimization.
choice | disable | Disable setting.
choice | enable | Enable setting.
wanopt_detection
string
    Choices:
  • active
  • passive
  • off
WAN optimization auto-detection mode.
choice | active | Active WAN optimization peer auto-detection.
choice | passive | Passive WAN optimization peer auto-detection.
choice | off | Turn off WAN optimization peer auto-detection.
wanopt_passive_opt
string
    Choices:
  • default
  • transparent
  • non-transparent
WAN optimization passive mode options. This option decides what IP address will be used to connect server.
choice | default | Allow client side WAN opt peer to decide.
choice | transparent | Use address of client to connect to server.
choice | non-transparent | Use local FortiGate address to connect to server.
wanopt_peer
string
WAN optimization peer.
wanopt_profile
string
WAN optimization profile.
wccp
string
    Choices:
  • disable
  • enable
Enable/disable forwarding traffic matching this policy to a configured WCCP server.
choice | disable | Disable WCCP setting.
choice | enable | Enable WCCP setting.
webcache
string
    Choices:
  • disable
  • enable
Enable/disable web cache.
choice | disable | Disable setting.
choice | enable | Enable setting.
webcache_https
string
    Choices:
  • disable
  • enable
Enable/disable web cache for HTTPS.
choice | disable | Disable web cache for HTTPS.
choice | enable | Enable web cache for HTTPS.
webfilter_profile
string
Name of an existing Web filter profile.
wsso
string
    Choices:
  • disable
  • enable
Enable/disable WiFi Single Sign On (WSSO).
choice | disable | Disable setting.
choice | enable | Enable setting.

Notes

Note

Examples

- name: ADD VERY BASIC IPV4 POLICY WITH NO NAT (WIDE OPEN)
  community.fortios.fmgr_fwpol_ipv4:
    mode: "set"
    adom: "ansible"
    package_name: "default"
    name: "Basic_IPv4_Policy"
    comments: "Created by Ansible"
    action: "accept"
    dstaddr: "all"
    srcaddr: "all"
    dstintf: "any"
    srcintf: "any"
    logtraffic: "utm"
    service: "ALL"
    schedule: "always"

- name: ADD VERY BASIC IPV4 POLICY WITH NAT AND MULTIPLE ENTRIES
  community.fortios.fmgr_fwpol_ipv4:
    mode: "set"
    adom: "ansible"
    package_name: "default"
    name: "Basic_IPv4_Policy_2"
    comments: "Created by Ansible"
    action: "accept"
    dstaddr: "google-play"
    srcaddr: "all"
    dstintf: "any"
    srcintf: "any"
    logtraffic: "utm"
    service: "HTTP, HTTPS"
    schedule: "always"
    nat: "enable"
    users: "karen, kevin"

- name: ADD VERY BASIC IPV4 POLICY WITH NAT AND MULTIPLE ENTRIES AND SEC PROFILES
  community.fortios.fmgr_fwpol_ipv4:
    mode: "set"
    adom: "ansible"
    package_name: "default"
    name: "Basic_IPv4_Policy_3"
    comments: "Created by Ansible"
    action: "accept"
    dstaddr: "google-play, autoupdate.opera.com"
    srcaddr: "corp_internal"
    dstintf: "zone_wan1, zone_wan2"
    srcintf: "zone_int1"
    logtraffic: "utm"
    service: "HTTP, HTTPS"
    schedule: "always"
    nat: "enable"
    users: "karen, kevin"
    av_profile: "sniffer-profile"
    ips_sensor: "default"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
api_result
string
always
full API response, includes status code and message


Authors

  • Luke Weighall (@lweighall)
  • Andrew Welsh (@Ghilli3)
  • Jim Huber (@p4r4n0y1ng)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/fortios/fmgr_fwpol_ipv4_module.html