W3cubDocs

/Ansible

community.general.dnsmadeeasy – Interface with dnsmadeeasy.com (a DNS hosting service).

Note

This plugin is part of the community.general collection (version 3.8.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.dnsmadeeasy.

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • hashlib
  • hmac

Parameters

Parameter Choices/Defaults Comments
account_key
string / required
Account API Key.
account_secret
string / required
Account Secret Key.
autoFailover
boolean
    Choices:
  • no
  • yes
If true, fallback to the primary IP address is manual after a failover.
If false, fallback to the primary IP address is automatic after a failover.
contactList
string
Default:
""
Name or id of the contact list that the monitor will notify.
The default '' means the Account Owner.
domain
string / required
Domain to work with. Can be the domain name (e.g. "mydomain.com") or the numeric ID of the domain in DNS Made Easy (e.g. "839989") for faster resolution
failover
boolean
    Choices:
  • no
  • yes
If yes, add or change the failover. This is applicable only for A records.
httpFile
string
The file at the Fqdn that the monitor queries for HTTP or HTTPS.
httpFqdn
string
The fully qualified domain name used by the monitor.
httpQueryString
string
The string in the httpFile that the monitor queries for HTTP or HTTPS.
ip1
string
Primary IP address for the failover.
Required if adding or changing the monitor or failover.
ip2
string
Secondary IP address for the failover.
Required if adding or changing the failover.
ip3
string
Tertiary IP address for the failover.
ip4
string
Quaternary IP address for the failover.
ip5
string
Quinary IP address for the failover.
maxEmails
integer
Default:
1
Number of emails sent to the contact list by the monitor.
monitor
boolean
    Choices:
  • no
  • yes
If yes, add or change the monitor. This is applicable only for A records.
port
integer
Default:
80
Port used by the monitor.
protocol
string
    Choices:
  • TCP
  • UDP
  • HTTP
  • DNS
  • SMTP
  • HTTPS
Protocol used by the monitor.
record_name
string
Record name to get/create/delete/update. If record_name is not specified; all records for the domain will be returned in "result" regardless of the state argument.
record_ttl
integer
Default:
1800
record's "Time to live". Number of seconds the record remains cached in DNS servers.
record_type
string
    Choices:
  • A
  • AAAA
  • CNAME
  • ANAME
  • HTTPRED
  • MX
  • NS
  • PTR
  • SRV
  • TXT
Record type.
record_value
string
Record value. HTTPRED: <redirection URL>, MX: <priority> <target name>, NS: <name server>, PTR: <target name>, SRV: <priority> <weight> <port> <target name>, TXT: <text value>"
If record_value is not specified; no changes will be made and the record will be returned in 'result' (in other words, this module can be used to fetch a record's current id, type, and ttl)
sandbox
boolean
    Choices:
  • no
  • yes
Decides if the sandbox API should be used. Otherwise (default) the production API of DNS Made Easy is used.
sensitivity
string
    Choices:
  • Low
  • Medium
  • High
Number of checks the monitor performs before a failover occurs where Low = 8, Medium = 5,and High = 3.
state
string / required
    Choices:
  • present
  • absent
whether the record should exist or not
systemDescription
string
Default:
""
Description used by the monitor.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Notes

Note

  • The DNS Made Easy service requires that machines interacting with the API have the proper time and timezone set. Be sure you are within a few seconds of actual time by using NTP.
  • This module returns record(s) and monitor(s) in the “result” element when ‘state’ is set to ‘present’. These values can be be registered and used in your playbooks.
  • Only A records can have a monitor or failover.
  • To add failover, the ‘failover’, ‘autoFailover’, ‘port’, ‘protocol’, ‘ip1’, and ‘ip2’ options are required.
  • To add monitor, the ‘monitor’, ‘port’, ‘protocol’, ‘maxEmails’, ‘systemDescription’, and ‘ip1’ options are required.
  • The monitor and the failover will share ‘port’, ‘protocol’, and ‘ip1’ options.

Examples

- name: Fetch my.com domain records
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
  register: response

- name: Create a record
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1

- name: Update the previously created record
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_value: 192.0.2.23

- name: Fetch a specific record
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
  register: response

- name: Delete a record
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    record_type: A
    state: absent
    record_name: test

- name: Add a failover
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    failover: True
    ip1: 127.0.0.2
    ip2: 127.0.0.3

- name: Add a failover
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    failover: True
    ip1: 127.0.0.2
    ip2: 127.0.0.3
    ip3: 127.0.0.4
    ip4: 127.0.0.5
    ip5: 127.0.0.6

- name: Add a monitor
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    monitor: yes
    ip1: 127.0.0.2
    protocol: HTTP  # default
    port: 80  # default
    maxEmails: 1
    systemDescription: Monitor Test A record
    contactList: my contact list

- name: Add a monitor with http options
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    monitor: yes
    ip1: 127.0.0.2
    protocol: HTTP  # default
    port: 80  # default
    maxEmails: 1
    systemDescription: Monitor Test A record
    contactList: 1174  # contact list id
    httpFqdn: http://my.com
    httpFile: example
    httpQueryString: some string

- name: Add a monitor and a failover
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    failover: True
    ip1: 127.0.0.2
    ip2: 127.0.0.3
    monitor: yes
    protocol: HTTPS
    port: 443
    maxEmails: 1
    systemDescription: monitoring my.com status
    contactList: emergencycontacts

- name: Remove a failover
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    failover: no

- name: Remove a monitor
  community.general.dnsmadeeasy:
    account_key: key
    account_secret: secret
    domain: my.com
    state: present
    record_name: test
    record_type: A
    record_value: 127.0.0.1
    monitor: no

Authors

  • Brice Burgess (@briceburg)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/general/dnsmadeeasy_module.html