W3cubDocs

/Ansible

community.hashi_vault.hashi_vault – Retrieve secrets from HashiCorp’s Vault

Note

This plugin is part of the community.hashi_vault collection (version 1.4.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.hashi_vault.

To use it in a playbook, specify: community.hashi_vault.hashi_vault.

Synopsis

  • Retrieve secrets from HashiCorp’s Vault.

Requirements

The below requirements are needed on the local controller node that executes this lookup.

Parameters

Parameter Choices/Defaults Configuration Comments
auth_method
string
    Choices:
  • token
  • userpass
  • ldap
  • approle
  • aws_iam_login
  • jwt
  • cert
  • none
ini entries:

[lookup_hashi_vault]
auth_method = token

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
auth_method = token

added in 1.4.0 of community.hashi_vault
env:VAULT_AUTH_METHOD
Removed in: version 2.0.0
Why: standardizing environment variables
Alternative: ANSIBLE_HASHI_VAULT_AUTH_METHOD
env:ANSIBLE_HASHI_VAULT_AUTH_METHOD
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_auth_method
added in 1.2.0 of community.hashi_vault
Authentication method to be used.
none auth method was added in collection version 1.2.0.
cert auth method was added in collection version 1.4.0.
aws_access_key
string
env:EC2_ACCESS_KEY
env:AWS_ACCESS_KEY
env:AWS_ACCESS_KEY_ID
The AWS access key to use.

aliases: aws_access_key_id
aws_iam_server_id
string
added in 0.2.0 of community.hashi_vault
ini entries:

[lookup_hashi_vault]
aws_iam_server_id = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
aws_iam_server_id = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_AWS_IAM_SERVER_ID
If specified, sets the value to use for the X-Vault-AWS-IAM-Server-ID header as part of GetCallerIdentity request.
aws_profile
string
env:AWS_DEFAULT_PROFILE
env:AWS_PROFILE
The AWS profile

aliases: boto_profile
aws_secret_key
string
env:EC2_SECRET_KEY
env:AWS_SECRET_KEY
env:AWS_SECRET_ACCESS_KEY
The AWS secret key that corresponds to the access key.

aliases: aws_secret_access_key
aws_security_token
string
env:EC2_SECURITY_TOKEN
env:AWS_SESSION_TOKEN
env:AWS_SECURITY_TOKEN
The AWS security token if using temporary access and secret keys.
ca_cert
string
ini entries:

[lookup_hashi_vault]
ca_cert = None

added in 1.2.0 of community.hashi_vault
Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
ca_cert = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_CA_CERT
added in 1.2.0 of community.hashi_vault
var: ansible_hashi_vault_ca_cert
added in 1.2.0 of community.hashi_vault
Path to certificate to use for authentication.
If not specified by any other means, the VAULT_CACERT environment variable will be used.

aliases: cacert
cert_auth_private_key
path
added in 1.4.0 of community.hashi_vault
ini entries:

[hashi_vault_collection]
cert_auth_private_key = None

env:ANSIBLE_HASHI_VAULT_CERT_AUTH_PRIVATE_KEY
For cert auth, path to the private key file to authenticate with, in PEM format.
cert_auth_public_key
path
added in 1.4.0 of community.hashi_vault
ini entries:

[hashi_vault_collection]
cert_auth_public_key = None

env:ANSIBLE_HASHI_VAULT_CERT_AUTH_PUBLIC_KEY
For cert auth, path to the certificate file to authenticate with, in PEM format.
jwt
string
env:ANSIBLE_HASHI_VAULT_JWT
The JSON Web Token (JWT) to use for JWT authentication to Vault.
mount_point
string
Vault mount point.
If not specified, the default mount point for a given auth method is used.
Does not apply to token authentication.
namespace
string
ini entries:

[lookup_hashi_vault]
namespace = None

added in 0.2.0 of community.hashi_vault
Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
namespace = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_NAMESPACE
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_namespace
added in 1.2.0 of community.hashi_vault
Vault namespace where secrets reside. This option requires HVAC 0.7.0+ and Vault 0.11+.
Optionally, this may be achieved by prefixing the authentication mount point and/or secret path with the namespace (e.g mynamespace/secret/mysecret).
If environment variable VAULT_NAMESPACE is set, its value will be used last among all ways to specify namespace.
password
string
env:ANSIBLE_HASHI_VAULT_PASSWORD
added in 1.2.0 of community.hashi_vault
var: ansible_hashi_vault_password
added in 1.2.0 of community.hashi_vault
Authentication password.
proxies
raw
added in 1.1.0 of community.hashi_vault
ini entries:

[lookup_hashi_vault]
proxies = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
proxies = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_PROXIES
var: ansible_hashi_vault_proxies
added in 1.2.0 of community.hashi_vault
URL(s) to the proxies used to access the Vault service.
It can be a string or a dict.
If it's a dict, provide the scheme (eg. http or https) as the key, and the URL as the value.
If it's a string, provide a single URL that will be used as the proxy for both http and https schemes.
A string that can be interpreted as a dictionary will be converted to one (see examples).
You can specify a different proxy for HTTP and HTTPS resources.
region
string
env:EC2_REGION
env:AWS_REGION
The AWS region for which to create the connection.
retries
raw
added in 1.3.0 of community.hashi_vault
ini entries:

[lookup_hashi_vault]
retries = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
retries = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_RETRIES
var: ansible_hashi_vault_retries
Allows for retrying on errors, based on the Retry class in the urllib3 library.
This collection defines recommended defaults for retrying connections to Vault.
This option can be specified as a positive number (integer) or dictionary.
If this option is not specified or the number is 0, then retries are disabled.
A number sets the total number of retries, and uses collection defaults for the other settings.
A dictionary value is used directly to initialize the Retry class, so it can be used to fully customize retries.
For detailed information on retries, see the collection User Guide.
retry_action
string
added in 1.3.0 of community.hashi_vault
    Choices:
  • ignore
  • warn
ini entries:

[lookup_hashi_vault]
retry_action = warn

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
retry_action = warn

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_RETRY_ACTION
var: ansible_hashi_vault_retry_action
Controls whether and how to show messages on retries.
This has no effect if a request is not retried.
return_format
string
    Choices:
  • dict
  • values
  • raw
Controls how multiple key/value pairs in a path are treated on return.
dict returns a single dict containing the key/value pairs.
values returns a list of all the values only. Use when you don't care about the keys.
raw returns the actual API result (deserialized), which includes metadata and may have the data nested in other keys.

aliases: as
role_id
string
ini entries:

[lookup_hashi_vault]
role_id = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
role_id = None

added in 1.4.0 of community.hashi_vault
env:VAULT_ROLE_ID
Removed in: version 2.0.0
Why: standardizing environment variables
Alternative: ANSIBLE_HASHI_VAULT_ROLE_ID
env:ANSIBLE_HASHI_VAULT_ROLE_ID
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_role_id
added in 1.2.0 of community.hashi_vault
Vault Role ID or name. Used in approle, aws_iam_login, and cert auth methods.
For cert auth, if no role_id is supplied, the default behavior is to try all certificate roles and return any one that matches.
secret
string / required
Vault path to the secret being requested in the format path[:field].
secret_id
string
env:VAULT_SECRET_ID
Removed in: version 2.0.0
Why: standardizing environment variables
Alternative: ANSIBLE_HASHI_VAULT_SECRET_ID
env:ANSIBLE_HASHI_VAULT_SECRET_ID
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_secret_id
added in 1.2.0 of community.hashi_vault
Secret ID to be used for Vault AppRole authentication.
timeout
integer
added in 1.3.0 of community.hashi_vault
ini entries:

[lookup_hashi_vault]
timeout = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
timeout = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_TIMEOUT
var: ansible_hashi_vault_timeout
Sets the connection timeout in seconds.
If not set, then the hvac library's default is used.
token
string
env:ANSIBLE_HASHI_VAULT_TOKEN
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_token
added in 1.2.0 of community.hashi_vault
Vault token. Token may be specified explicitly, through the listed [env] vars, and also through the VAULT_TOKEN env var.
If no token is supplied, explicitly or through env, then the plugin will check for a token file, as determined by token_path and token_file.
The order of token loading (first found wins) is token param -> ansible var -> ANSIBLE_HASHI_VAULT_TOKEN -> VAULT_TOKEN -> token file.
token_file
string
Default:
".vault-token"
ini entries:

[lookup_hashi_vault]
token_file = .vault-token

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
token_file = .vault-token

added in 1.4.0 of community.hashi_vault
env:VAULT_TOKEN_FILE
Removed in: version 2.0.0
Why: standardizing environment variables
Alternative: ANSIBLE_HASHI_VAULT_TOKEN_FILE
env:ANSIBLE_HASHI_VAULT_TOKEN_FILE
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_token_file
added in 1.2.0 of community.hashi_vault
If no token is specified, will try to read the token from this file in token_path.
token_path
string
ini entries:

[lookup_hashi_vault]
token_path = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
token_path = None

added in 1.4.0 of community.hashi_vault
env:VAULT_TOKEN_PATH
Removed in: version 2.0.0
Why: standardizing environment variables
Alternative: ANSIBLE_HASHI_VAULT_TOKEN_PATH
env:ANSIBLE_HASHI_VAULT_TOKEN_PATH
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_token_path
added in 1.2.0 of community.hashi_vault
If no token is specified, will try to read the token_file from this path.
token_validate
boolean
added in 0.2.0 of community.hashi_vault
    Choices:
  • no
  • yes
ini entries:

[lookup_hashi_vault]
token_validate = yes

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
token_validate = yes

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_TOKEN_VALIDATE
var: ansible_hashi_vault_token_validate
added in 1.2.0 of community.hashi_vault
For token auth, will perform a lookup-self operation to determine the token's validity before using it.
Disable if your token does not have the lookup-self capability.
url
string
ini entries:

[lookup_hashi_vault]
url = None

Removed in: version 3.0.0
Why: collection-wide config section
Alternative: use section [hashi_vault_collection]

[hashi_vault_collection]
url = None

added in 1.4.0 of community.hashi_vault
env:ANSIBLE_HASHI_VAULT_ADDR
added in 0.2.0 of community.hashi_vault
var: ansible_hashi_vault_url
added in 1.2.0 of community.hashi_vault
var: ansible_hashi_vault_addr
added in 1.2.0 of community.hashi_vault
URL to the Vault service.
If not specified by any other means, the value of the VAULT_ADDR environment variable will be used.
If VAULT_ADDR is also not defined then a default of http://127.0.0.1:8200 will be used.
username
string
env:ANSIBLE_HASHI_VAULT_USERNAME
added in 1.2.0 of community.hashi_vault
var: ansible_hashi_vault_username
added in 1.2.0 of community.hashi_vault
Authentication user name.
validate_certs
boolean
    Choices:
  • no
  • yes
var: ansible_hashi_vault_validate_certs
added in 1.2.0 of community.hashi_vault
Controls verification and validation of SSL certificates, mostly you only want to turn off with self signed ones.
Will be populated with the inverse of VAULT_SKIP_VERIFY if that is set and validate_certs is not explicitly provided.
Will default to true if neither validate_certs or VAULT_SKIP_VERIFY are set.

Notes

Note

  • Due to a current limitation in the HVAC library there won’t necessarily be an error if a bad endpoint is specified.
  • As of community.hashi_vault 0.1.0, only the latest version of a secret is returned when specifying a KV v2 path.
  • As of community.hashi_vault 0.1.0, all options can be supplied via term string (space delimited key=value pairs) or by parameters (see examples).
  • As of community.hashi_vault 0.1.0, when secret is the first option in the term string, secret= is not required (see examples).

See Also

See also

community.hashi_vault.vault_read lookup

The official documentation for the community.hashi_vault.vault_read lookup plugin.

community.hashi_vault.vault_read

The official documentation on the community.hashi_vault.vault_read module.

Examples

- ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hello:value token=c975b780-d1be-8016-866b-01d0f9b688a5 url=http://myvault:8200') }}"

- name: Return all secrets from a path
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hello token=c975b780-d1be-8016-866b-01d0f9b688a5 url=http://myvault:8200') }}"

- name: Vault that requires authentication via LDAP
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hello:value auth_method=ldap mount_point=ldap username=myuser password=mypas') }}"

- name: Vault that requires authentication via username and password
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hola:val auth_method=userpass username=myuser password=psw url=http://vault:8200') }}"

- name: Connect to Vault using TLS
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hola:value token=c975b780-d1be-8016-866b-01d0f9b688a5 validate_certs=False') }}"

- name: using certificate auth
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hi:val token=xxxx url=https://vault:8200 validate_certs=True cacert=/cacert/path/ca.pem') }}"

- name: Authenticate with a Vault app role
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hello:value auth_method=approle role_id=myroleid secret_id=mysecretid') }}"

- name: Return all secrets from a path in a namespace
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/hello token=c975b780-d1be-8016-866b-01d0f9b688a5 namespace=teama/admins') }}"

# When using KV v2 the PATH should include "data" between the secret engine mount and path (e.g. "secret/data/:path")
# see: https://www.vaultproject.io/api/secret/kv/kv-v2.html#read-secret-version
- name: Return latest KV v2 secret from path
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=secret/data/hello token=my_vault_token url=http://myvault_url:8200') }}"

# The following examples show more modern syntax, with parameters specified separately from the term string.

- name: secret= is not required if secret is first
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/hello token=<token> url=http://myvault_url:8200') }}"

- name: options can be specified as parameters rather than put in term string
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/hello', token=my_token_var, url='http://myvault_url:8200') }}"

# return_format (or its alias 'as') can control how secrets are returned to you
- name: return secrets as a dict (default)
  ansible.builtin.set_fact:
    my_secrets: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/manysecrets', token=my_token_var, url='http://myvault_url:8200') }}"
- ansible.builtin.debug:
    msg: "{{ my_secrets['secret_key'] }}"
- ansible.builtin.debug:
    msg: "Secret '{{ item.key }}' has value '{{ item.value }}'"
  loop: "{{ my_secrets | dict2items }}"

- name: return secrets as values only
  ansible.builtin.debug:
    msg: "A secret value: {{ item }}"
  loop: "{{ query('community.hashi_vault.hashi_vault', 'secret/data/manysecrets', token=my_token_var, url='http://vault_url:8200', return_format='values') }}"

- name: return raw secret from API, including metadata
  ansible.builtin.set_fact:
    my_secret: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/hello:value', token=my_token_var, url='http://myvault_url:8200', as='raw') }}"
- ansible.builtin.debug:
    msg: "This is version {{ my_secret['metadata']['version'] }} of hello:value. The secret data is {{ my_secret['data']['data']['value'] }}"

# AWS IAM authentication method
# uses Ansible standard AWS options

- name: authenticate with aws_iam_login
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hello:value', auth_method='aws_iam_login', role_id='myroleid', profile=my_boto_profile) }}"

# JWT auth

- name: Authenticate with a JWT
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hola:val', auth_method='jwt', role_id='myroleid', jwt='myjwt', url='https://vault:8200') }}"

# Disabling Token Validation
# Use this when your token does not have the lookup-self capability. Usually this is applied to all tokens via the default policy.
# However you can choose to create tokens without applying the default policy, or you can modify your default policy not to include it.
# When disabled, your invalid or expired token will be indistinguishable from insufficent permissions.

- name: authenticate without token validation
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hello:value', token=my_token, token_validate=False) }}"

# "none" auth method does no authentication and does not send a token to the Vault address.
# One example of where this could be used is with a Vault agent where the agent will handle authentication to Vault.
# https://www.vaultproject.io/docs/agent

- name: authenticate with vault agent
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/hello:value', auth_method='none', url='http://127.0.0.1:8100') }}"

# Use a proxy

- name: use a proxy with login/password
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=... token=... url=https://... proxies=https://user:pass@myproxy:8080') }}"

- name: 'use a socks proxy (need some additional dependencies, see: https://requests.readthedocs.io/en/master/user/advanced/#socks )'
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret=... token=... url=https://... proxies=socks5://myproxy:1080') }}"

- name: use proxies with a dict (as param)
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', '...', proxies={'http': 'http://myproxy1', 'https': 'http://myproxy2'}) }}"

- name: use proxies with a dict (as param, pre-defined var)
  vars:
    prox:
      http: http://myproxy1
      https: https://myproxy2
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', '...', proxies=prox }}"

- name: use proxies with a dict (as direct ansible var)
  vars:
    ansible_hashi_vault_proxies:
      http: http://myproxy1
      https: https://myproxy2
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', '...' }}"

- name: use proxies with a dict (in the term string, JSON syntax)
  ansible.builtin.debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', '... proxies={\"http\":\"http://myproxy1\",\"https\":\"http://myproxy2\"}') }}"

- name: use ansible vars to supply some options
  vars:
    ansible_hashi_vault_url: 'https://myvault:8282'
    ansible_hashi_vault_auth_method: token
  set_fact:
    secret1: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/secret1') }}"
    secret2: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/secret2') }}"

- name: use a custom timeout
  debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/secret1', timeout=120) }}"

- name: use a custom timeout and retry on failure 3 times (with collection retry defaults)
  vars:
    ansible_hashi_vault_timeout: 5
    ansible_hashi_vault_retries: 3
  debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/secret1') }}"

- name: retry on failure (with custom retry settings and no warnings)
  vars:
    ansible_hashi_vault_retries:
      total: 6
      backoff_factor: 0.9
      status_forcelist: [500, 502]
      allowed_methods:
        - GET
        - PUT
  debug:
    msg: "{{ lookup('community.hashi_vault.hashi_vault', 'secret/data/secret1', retry_action='warn') }}"

Return Values

Common return values are documented here, the following are the fields unique to this lookup:

Key Returned Description
_raw
list / elements=dictionary
success
secrets(s) requested



Authors

  • Julie Davila (@juliedavila) <julie(at)davila.io>
  • Brian Scholer (@briantist)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/hashi_vault/hashi_vault_lookup.html