W3cubDocs

/Ansible

community.network.ce_lldp_interface – Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_lldp_interface.

New in version 0.2.0: of community.network

Synopsis

  • Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter Choices/Defaults Comments
dcbx
boolean
    Choices:
  • no
  • yes
Enable the ability to send DCBX TLV.
eee
boolean
    Choices:
  • no
  • yes
Enable the ability to send EEE TLV.
function_lldp_interface_flag
string
    Choices:
  • disableINTERFACE
  • tlvdisableINTERFACE
  • tlvenableINTERFACE
  • intervalINTERFACE
Used to distinguish between command line functions.
ifname
string
Interface name.
linkaggretxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send link aggregation TLV.
lldpadminstatus
string
    Choices:
  • txOnly
  • rxOnly
  • txAndRx
  • disabled
Set interface lldp enable state.
lldpenable
string
    Choices:
  • enabled
  • disabled
Set global LLDP enable state.
macphytxenable
boolean
    Choices:
  • no
  • yes
Enable MAC/PHY configuration and state TLV to be sent.
manaddrtxenable
boolean
    Choices:
  • no
  • yes
Make it able to send management address TLV.
maxframetxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send maximum frame length TLV.
portdesctxenable
boolean
    Choices:
  • no
  • yes
Enabling the ability to send a description of TLV.
portvlantxenable
boolean
    Choices:
  • no
  • yes
Enable port vlan tx.
protoidtxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send protocol identity TLV.
protovlantxenable
boolean
    Choices:
  • no
  • yes
Enable protocol vlan tx.
state
string
    Choices:
  • present ←
  • absent
Manage the state of the resource.
syscaptxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send system capabilities TLV.
sysdesctxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send system description TLV.
sysnametxenable
boolean
    Choices:
  • no
  • yes
Enable the ability to send system name TLV.
txinterval
integer
LLDP send message interval.
txprotocolvlanid
integer
Set tx protocol vlan id.
txvlannameid
integer
Set tx vlan name id.
type_tlv_disable
string
    Choices:
  • basic_tlv
  • dot3_tlv
Used to distinguish between command line functions.
type_tlv_enable
string
    Choices:
  • dot1_tlv
  • dcbx
Used to distinguish between command line functions.
vlannametxenable
boolean
    Choices:
  • no
  • yes
Set vlan name tx enable or not.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: "Configure global LLDP enable state"
  ce_lldp_interface_interface:
    lldpenable: enabled

- name: "Configure interface lldp enable state"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: disableINTERFACE
    ifname: 10GE1/0/1
    lldpadminstatus: rxOnly
- name: "Configure LLDP transmit interval and ensure global LLDP state is already enabled"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: intervalINTERFACE
    ifname: 10GE1/0/1
    txinterval: 4

- name: "Configure basic-tlv: management-address TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    manaddrtxenable: true

- name: "Configure basic-tlv: prot description TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    portdesctxenable: true

- name: "Configure basic-tlv: system capabilities TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    syscaptxenable: true

- name: "Configure basic-tlv: system description TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    sysdesctxenable: true

- name: "Configure basic-tlv: system name TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    sysnametxenable: true

- name: "TLV types that are forbidden to be published on the configuration interface, link aggregation TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    linkAggreTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, MAC/PHY configuration/status TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    macPhyTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, maximum frame size TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    maxFrameTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, EEE TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    eee: true

- name: "Configure the interface to publish an optional DCBX TLV type "
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvenableINTERFACE
    ifname: 10GE1/0/1
    type_tlv_enable: dcbx

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
always
k/v pairs of global DLDP configration after module execution

Sample:
{'function_lldp_interface_flag': 'tlvenableINTERFACE', 'ifname': '10GE1/0/1', 'lldpadminstatus': 'rxOnly', 'lldpenable': 'enabled', 'type_tlv_enable': 'dot1_tlv'}
existing
dictionary
always
k/v pairs of existing global LLDP configration

Sample:
{'ifname': '10GE1/0/1', 'lldpadminstatus': 'txAndRx', 'lldpenable': 'disabled'}
proposed
dictionary
always
k/v pairs of parameters passed into module

Sample:
{'function_lldp_interface_flag': 'tlvenableINTERFACE', 'ifname': '10GE1/0/1', 'lldpadminstatus': 'rxOnly', 'lldpenable': 'enabled', 'state': 'present', 'type_tlv_enable': 'dot1_tlv'}
updates
list / elements=string
always
command sent to the device

Sample:
['lldp enable', 'interface 10ge 1/0/1', 'undo lldp disable', 'lldp tlv-enable dot1-tlv vlan-name 4']


Authors

  • xuxiaowei0512 (@CloudEngine-Ansible)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/ce_lldp_interface_module.html