W3cubDocs

/Ansible

community.network.ce_vxlan_vap – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_vxlan_vap.

Synopsis

  • Manages VXLAN Virtual access point on HUAWEI CloudEngine Devices.

Parameters

Parameter Choices/Defaults Comments
bind_vlan_id
string
Specifies the VLAN binding to a BD(Bridge Domain). The value is an integer ranging ranging from 1 to 4094.
bridge_domain_id
string
Specifies a bridge domain ID. The value is an integer ranging from 1 to 16777215.
ce_vid
string
When encapsulation is 'dot1q', specifies a VLAN ID in the outer VLAN tag. When encapsulation is 'qinq', specifies an outer VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.
encapsulation
string
    Choices:
  • dot1q
  • default
  • untag
  • qinq
  • none
Specifies an encapsulation type of packets allowed to pass through a Layer 2 sub-interface.
l2_sub_interface
string
Specifies an Sub-Interface full name, i.e. "10GE1/0/41.1". The value is a string of 1 to 63 case-insensitive characters, spaces supported.
pe_vid
string
When encapsulation is 'qinq', specifies an inner VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.
state
string
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: Vxlan vap module test
  hosts: ce128
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Create a mapping between a VLAN and a BD
    community.network.ce_vxlan_vap:
      bridge_domain_id: 100
      bind_vlan_id: 99
      provider: "{{ cli }}"

  - name: Bind a Layer 2 sub-interface to a BD
    community.network.ce_vxlan_vap:
      bridge_domain_id: 100
      l2_sub_interface: 10GE2/0/20.1
      provider: "{{ cli }}"

  - name: Configure an encapsulation type on a Layer 2 sub-interface
    community.network.ce_vxlan_vap:
      l2_sub_interface: 10GE2/0/20.1
      encapsulation: dot1q
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
verbose mode
k/v pairs of configuration after module execution

Sample:
{'bind_intf_list': ['110GE2/0/20.1', '10GE2/0/20.2'], 'bind_vlan_list': ['99'], 'bridge_domain_id': '100'}
existing
dictionary
verbose mode
k/v pairs of existing configuration

Sample:
{'bind_intf_list': ['10GE2/0/20.1', '10GE2/0/20.2'], 'bind_vlan_list': [], 'bridge_domain_id': '100'}
proposed
dictionary
verbose mode
k/v pairs of parameters passed into module

Sample:
{'bind_vlan_id': '99', 'bridge_domain_id': '100', 'state="present"': None}
updates
list / elements=string
always
commands sent to the device

Sample:
['bridge-domain 100', 'l2 binding vlan 99']


Authors

  • QijunPan (@QijunPan)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/ce_vxlan_vap_module.html