Note
This plugin is part of the community.vmware collection (version 1.15.0).
You might already have this collection installed if you are using the ansible
package. It is not included in ansible-core
. To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.vmware
.
To use it in a playbook, specify: community.vmware.vmware_guest_disk
.
The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments | |||
---|---|---|---|---|---|
datacenter string / required | The datacenter name to which virtual machine belongs to. | ||||
disk list / elements=dictionary | Default: [] | A list of disks to add or remove. The virtual disk related information is provided using this list. All values and parameters are case sensitive. | |||
autoselect_datastore boolean |
| Select the less used datastore. Specify only if datastore is not specified. | |||
compatibility_mode string |
| Compatibility mode for raw devices. Required for disk type 'rdm' | |||
controller_number integer |
| This parameter is used with controller_type for specifying controller bus number. | |||
controller_type string |
| This parameter is added for managing disks attaching other types of controllers, e.g., SATA or NVMe. If either controller_type or scsi_type is not specified, then use paravirtual type. | |||
datastore string | Name of datastore or datastore cluster to be used for the disk. | ||||
destroy boolean |
| If state is absent , make sure the disk file is deleted from the datastore. Added in version 2.10. | |||
disk_mode string |
| Type of disk mode. If not specified then use persistent mode for new disk.If set to 'persistent' mode, changes are immediately and permanently written to the virtual disk. If set to 'independent_persistent' mode, same as persistent, but not affected by snapshots. If set to 'independent_nonpersistent' mode, changes to virtual disk are made to a redo log and discarded at power off, but not affected by snapshots. | |||
filename string | Existing disk image to be used. Filename must already exist on the datastore. Specify filename string in [datastore_name] path/to/file.vmdk format. Added in version 2.10. | ||||
iolimit dictionary | Section specifies the shares and limit for storage I/O resource. | ||||
limit integer | Section specifies values for limit where the utilization of a virtual machine will not exceed, even if there are available resources. | ||||
shares dictionary | Specifies different types of shares user can add for the given disk. | ||||
level string |
| Specifies different level for the shares section. | |||
level_value integer | Custom value when level is set as custom . | ||||
rdm_path string added in 1.12.0 of community.vmware | Path of LUN for Raw Device Mapping required for disk type rdm .Only valid is type is set to rdm . | ||||
scsi_controller integer |
| SCSI controller number. Only 4 SCSI controllers are allowed per VM. Care should be taken while specifying 'scsi_controller' is 0 and 'unit_number' as 0 as this disk may contain OS. | |||
scsi_type string |
| Type of SCSI controller. This value is required only for the first occurrence of SCSI Controller. This value is ignored, if SCSI Controller is already present or state is absent . | |||
shares dictionary | Section for iolimit section tells about what are all different types of shares user can add for disk. | ||||
level string |
| Tells about different level for the shares section. | |||
level_value integer | Custom value when level is set as custom . | ||||
sharing boolean |
| This parameter is not available for Raw Device Mapping(RDM). The sharing mode of the virtual disk. Setting sharing means that multiple virtual machines can write to the virtual disk. Sharing can only be set if type is set to eagerzeroedthick . | |||
size string | Disk storage size. If size specified then unit must be specified. There is no space allowed in between size number and unit. Only first occurrence in disk element will be considered, even if there are multiple size* parameters available. | ||||
size_gb integer | Disk storage size in gb. | ||||
size_kb integer | Disk storage size in kb. | ||||
size_mb integer | Disk storage size in mb. | ||||
size_tb integer | Disk storage size in tb. | ||||
state string |
| State of disk. If set to 'absent', disk will be removed permanently from virtual machine configuration and from VMware storage. If set to 'present', disk will be added if not present at given Controller and Unit Number. or disk exists with different size, disk size is increased, reducing disk size is not allowed. | |||
type string |
| The type of disk, if not specified then use thick type for new disk, no eagerzero.The disk type rdm is added in version 1.13.0. | |||
unit_number integer / required | Disk Unit Number. Valid value range from 0 to 15, except 7 for SCSI Controller. Valid value range from 0 to 29 for SATA controller. Valid value range from 0 to 14 for NVME controller. | ||||
folder string | Destination folder, absolute or relative path to find an existing guest. This is a required parameter, only if multiple VMs are found with same name. The folder should include the datacenter. ESX's datacenter is ha-datacenter Examples: folder: /ha-datacenter/vm folder: ha-datacenter/vm folder: /datacenter1/vm folder: datacenter1/vm folder: /datacenter1/vm/folder1 folder: datacenter1/vm/folder1 folder: /folder1/datacenter1/vm folder: folder1/datacenter1/vm folder: /folder1/datacenter1/vm/folder2 | ||||
hostname string | The hostname or IP address of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_HOST will be used instead.Environment variable support added in Ansible 2.6. | ||||
moid string | Managed Object ID of the instance to manage if known, this is a unique identifier only within a single vCenter instance. This is required if name or uuid is not supplied. | ||||
name string | Name of the virtual machine. This is a required parameter, if parameter uuid or moid is not supplied. | ||||
password string | The password of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_PASSWORD will be used instead.Environment variable support added in Ansible 2.6. aliases: pass, pwd | ||||
port integer | Default: 443 | The port number of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_PORT will be used instead.Environment variable support added in Ansible 2.6. | |||
proxy_host string | Address of a proxy that will receive all HTTPS requests and relay them. The format is a hostname or a IP. If the value is not specified in the task, the value of environment variable VMWARE_PROXY_HOST will be used instead.This feature depends on a version of pyvmomi greater than v6.7.1.2018.12 | ||||
proxy_port integer | Port of the HTTP proxy that will receive all HTTPS requests and relay them. If the value is not specified in the task, the value of environment variable VMWARE_PROXY_PORT will be used instead. | ||||
use_instance_uuid boolean |
| Whether to use the VMware instance UUID rather than the BIOS UUID. | |||
username string | The username of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_USER will be used instead.Environment variable support added in Ansible 2.6. aliases: admin, user | ||||
uuid string | UUID of the instance to gather facts if known, this is VMware's unique identifier. This is a required parameter, if parameter name or moid is not supplied. | ||||
validate_certs boolean |
| Allows connection when SSL certificates are not valid. Set to false when certificates are not trusted.If the value is not specified in the task, the value of environment variable VMWARE_VALIDATE_CERTS will be used instead.Environment variable support added in Ansible 2.6. If set to true , please make sure Python >= 2.7.9 is installed on the given machine. |
Note
- name: Add disks to virtual machine using UUID community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" uuid: 421e4592-c069-924d-ce20-7e7533fab926 disk: - size_mb: 10 type: thin datastore: datacluster0 state: present scsi_controller: 1 unit_number: 1 scsi_type: 'paravirtual' disk_mode: 'persistent' - size_gb: 10 type: eagerzeroedthick state: present autoselect_datastore: True scsi_controller: 2 scsi_type: 'buslogic' unit_number: 12 disk_mode: 'independent_persistent' - size: 10Gb type: eagerzeroedthick state: present autoselect_datastore: True scsi_controller: 2 scsi_type: 'buslogic' unit_number: 1 disk_mode: 'independent_nonpersistent' - filename: "[datastore1] path/to/existing/disk.vmdk" delegate_to: localhost register: disk_facts - name: Add disks with specified shares to the virtual machine community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" disk: - size_gb: 1 type: thin datastore: datacluster0 state: present scsi_controller: 1 unit_number: 1 disk_mode: 'independent_persistent' shares: level: custom level_value: 1300 delegate_to: localhost register: test_custom_shares - name: Add physical raw device mapping to virtual machine using name community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" validate_certs: no name: "Test_VM" disk: - type: rdm state: present scsi_controller: 1 unit_number: 5 rdm_path: /vmfs/devices/disks/naa.060000003b1234efb453 compatibility_mode: 'physicalMode' - name: Add virtual raw device mapping to virtual machine using name and virtual mode community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" validate_certs: no name: "Test_VM" disk: - type: rdm state: present scsi_controller: 1 unit_number: 5 rdm_path: /vmfs/devices/disks/naa.060000003b1234efb453 compatibility_mode: 'virtualMode' disk_mode: 'persistent' - name: create new disk with custom IO limits and shares in IO Limits community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" disk: - size_gb: 1 type: thin datastore: datacluster0 state: present scsi_controller: 1 unit_number: 1 disk_mode: 'independent_persistent' iolimit: limit: 1506 shares: level: custom level_value: 1305 delegate_to: localhost register: test_custom_IoLimit_shares - name: Remove disks from virtual machine using name community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" name: VM_225 disk: - state: absent scsi_controller: 1 unit_number: 1 delegate_to: localhost register: disk_facts - name: Remove disk from virtual machine using moid community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" moid: vm-42 disk: - state: absent scsi_controller: 1 unit_number: 1 delegate_to: localhost register: disk_facts - name: Remove disk from virtual machine but keep the VMDK file on the datastore community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" name: VM_225 disk: - state: absent scsi_controller: 1 unit_number: 2 destroy: no delegate_to: localhost register: disk_facts - name: Add disks to virtual machine using UUID to SATA and NVMe controller community.vmware.vmware_guest_disk: hostname: "{{ vcenter_hostname }}" username: "{{ vcenter_username }}" password: "{{ vcenter_password }}" datacenter: "{{ datacenter_name }}" validate_certs: no uuid: 421e4592-c069-924d-ce20-7e7533fab926 disk: - size_mb: 256 type: thin datastore: datacluster0 state: present controller_type: sata controller_number: 1 unit_number: 1 disk_mode: 'persistent' - size_gb: 1 state: present autoselect_datastore: True controller_type: nvme controller_number: 2 unit_number: 3 disk_mode: 'independent_persistent' delegate_to: localhost register: disk_facts
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
disk_status dictionary | always | metadata about the virtual machine's disks after managing them Sample: {'0': {'backing_datastore': 'datastore2', 'backing_disk_mode': 'persistent', 'backing_eagerlyscrub': False, 'backing_filename': '[datastore2] VM_225/VM_225.vmdk', 'backing_thinprovisioned': False, 'backing_uuid': '421e4592-c069-924d-ce20-7e7533fab926', 'backing_writethrough': False, 'capacity_in_bytes': 10485760, 'capacity_in_kb': 10240, 'controller_key': 1000, 'key': 2000, 'label': 'Hard disk 1', 'summary': '10,240 KB', 'unit_number': 0}} |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/vmware/vmware_guest_disk_module.html