Note
This plugin is part of the containers.podman collection (version 1.8.1).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install containers.podman.
To use it in a playbook, specify: containers.podman.podman_container.
New in version 1.0.0: of containers.podman
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| annotation dictionary | Add an annotation to the container. The format is key value, multiple times. | ||
| authfile path | Path of the authentication file. Default is ``${XDG_RUNTIME_DIR}/containers/auth.json`` (Not available for remote commands) You can also override the default path of the authentication file by setting the ``REGISTRY_AUTH_FILE`` environment variable. ``export REGISTRY_AUTH_FILE=path`` | ||
| blkio_weight integer | Block IO weight (relative weight) accepts a weight value between 10 and 1000 | ||
| blkio_weight_device dictionary | Block IO weight (relative device weight, format DEVICE_NAME[:]WEIGHT). | ||
| cap_add list / elements=string | List of capabilities to add to the container. aliases: capabilities | ||
| cap_drop list / elements=string | List of capabilities to drop from the container. | ||
| cgroup_parent path | Path to cgroups under which the cgroup for the container will be created. If the path is not absolute, the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if they do not already exist. | ||
| cgroupns string | Path to cgroups under which the cgroup for the container will be created. | ||
| cgroups string | Determines whether the container will create CGroups. Valid values are enabled and disabled, which the default being enabled. The disabled option will force the container to not create CGroups, and thus conflicts with CGroup options cgroupns and cgroup-parent. | ||
| cidfile path | Write the container ID to the file | ||
| cmd_args list / elements=string | Any additional command options you want to pass to podman command, cmd_args - ['--other-param', 'value'] Be aware module doesn't support idempotency if this is set. | ||
| command raw | Override command of container. Can be a string or a list. | ||
| conmon_pidfile path | Write the pid of the conmon process to a file. conmon runs in a separate process than Podman, so this is necessary when using systemd to restart Podman containers. | ||
| cpu_period integer | Limit the CPU real-time period in microseconds | ||
| cpu_rt_period integer | Limit the CPU real-time period in microseconds. Limit the container's Real Time CPU usage. This flag tell the kernel to restrict the container's Real Time CPU usage to the period you specify. | ||
| cpu_rt_runtime integer | Limit the CPU real-time runtime in microseconds. This flag tells the kernel to limit the amount of time in a given CPU period Real Time tasks may consume. | ||
| cpu_shares integer | CPU shares (relative weight) | ||
| cpus string | Number of CPUs. The default is 0.0 which means no limit. | ||
| cpuset_cpus string | CPUs in which to allow execution (0-3, 0,1) | ||
| cpuset_mems string | Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems. | ||
| debug boolean |
| Return additional information which can be helpful for investigations. | |
| detach boolean |
| Run container in detach mode | |
| detach_keys string | Override the key sequence for detaching a container. Format is a single character or ctrl-value | ||
| device list / elements=string | Add a host device to the container. The format is <device-on-host>[:<device-on-container>][:<permissions>] (e.g. device /dev/sdc:/dev/xvdc:rwm) | ||
| device_read_bps list / elements=string | Limit read rate (bytes per second) from a device (e.g. device-read-bps /dev/sda:1mb) | ||
| device_read_iops list / elements=string | Limit read rate (IO per second) from a device (e.g. device-read-iops /dev/sda:1000) | ||
| device_write_bps list / elements=string | Limit write rate (bytes per second) to a device (e.g. device-write-bps /dev/sda:1mb) | ||
| device_write_iops list / elements=string | Limit write rate (IO per second) to a device (e.g. device-write-iops /dev/sda:1000) | ||
| dns list / elements=string | Set custom DNS servers aliases: dns_servers | ||
| dns_option string | Set custom DNS options aliases: dns_opts | ||
| dns_search string | Set custom DNS search domains (Use dns_search with '' if you don't wish to set the search domain) aliases: dns_search_domains | ||
| entrypoint string | Overwrite the default ENTRYPOINT of the image | ||
| env dictionary | Set environment variables. This option allows you to specify arbitrary environment variables that are available for the process that will be launched inside of the container. | ||
| env_file path | Read in a line delimited file of environment variables. Doesn't support idempotency. If users changes the file with environment variables it's on them to recreate the container. | ||
| env_host boolean |
| Use all current host environment variables in container. Defaults to false. | |
| etc_hosts dictionary | Dict of host-to-IP mappings, where each host name is a key in the dictionary. Each host name will be added to the container's ``/etc/hosts`` file. aliases: add_hosts | ||
| executable string | Default: "podman" | Path to podman executable if it is not in the $PATH on the machine running podman
| |
| expose list / elements=string | Expose a port, or a range of ports (e.g. expose "3300-3310") to set up port redirection on the host system. aliases: exposed, exposed_ports | ||
| force_restart boolean |
| Force restart of container. aliases: restart | |
| generate_systemd dictionary | Default: {} | Generate systemd unit file for container. | |
| container_prefix string | Set the systemd unit name prefix for containers. The default is "container". | ||
| names boolean |
| Use names of the containers for the start, stop, and description in the unit file. Default is true. | |
| no_header boolean |
| Do not generate the header including meta data such as the Podman version and the timestamp. From podman version 3.1.0. | |
| path string | Specify a path to the directory where unit files will be generated. If it doesn't exist, the directory will be created. | ||
| pod_prefix string | Set the systemd unit name prefix for pods. The default is "pod". | ||
| restart_policy string |
| Specify a restart policy for the service. The restart-policy must be one of "no", "on-success", "on-failure", "on-abnormal", "on-watchdog", "on-abort", or "always". The default policy is "on-failure". | |
| separator string | Set the systemd unit name separator between the name/id of a container/pod and the prefix. The default is "-" (dash). | ||
| time integer | Override the default stop timeout for the container with the given value. | ||
| gidmap list / elements=string | Run the container in a new user namespace using the supplied mapping. | ||
| group_add list / elements=string | Add additional groups to run as aliases: groups | ||
| healthcheck string | Set or alter a healthcheck command for a container. | ||
| healthcheck_interval string | Set an interval for the healthchecks (a value of disable results in no automatic timer setup) (default "30s") | ||
| healthcheck_retries integer | The number of retries allowed before a healthcheck is considered to be unhealthy. The default value is 3. | ||
| healthcheck_start_period string | The initialization time needed for a container to bootstrap. The value can be expressed in time format like 2m3s. The default value is 0s | ||
| healthcheck_timeout string | The maximum time allowed to complete the healthcheck before an interval is considered failed. Like start-period, the value can be expressed in a time format such as 1m22s. The default value is 30s | ||
| hostname string | Container host name. Sets the container host name that is available inside the container. | ||
| http_proxy boolean |
| By default proxy environment variables are passed into the container if set for the podman process. This can be disabled by setting the http_proxy option to false. The environment variables passed in include http_proxy, https_proxy, ftp_proxy, no_proxy, and also the upper case versions of those. Defaults to true | |
| image string | Repository path (or image name) and tag used to create the container. If an image is not found, the image will be pulled from the registry. If no tag is included, latest will be used.Can also be an image ID. If this is the case, the image is assumed to be available locally. | ||
| image_strict boolean |
| Whether to compare images in idempotency by taking into account a full name with registry and namespaces. | |
| image_volume string |
| Tells podman how to handle the builtin image volumes. The options are bind, tmpfs, or ignore (default bind) | |
| init boolean |
| Run an init inside the container that forwards signals and reaps processes. The default is false. | |
| init_path string | Path to the container-init binary. | ||
| interactive boolean |
| Keep STDIN open even if not attached. The default is false. When set to true, keep stdin open even if not attached. The default is false. | |
| ip string | Specify a static IP address for the container, for example '10.88.64.128'. Can only be used if no additional CNI networks to join were specified via 'network:', and if the container is not joining another container's network namespace via 'network container:<name|id>'. The address must be within the default CNI network's pool (default 10.88.0.0/16). | ||
| ipc string | Default is to create a private IPC namespace (POSIX SysV IPC) for the container aliases: ipc_mode | ||
| kernel_memory string | Kernel memory limit (format <number>[<unit>], where unit = b, k, m or g) Note - idempotency is supported for integers only. | ||
| label dictionary | Add metadata to a container, pass dictionary of label names and values aliases: labels | ||
| label_file string | Read in a line delimited file of labels | ||
| log_driver string |
| Logging driver. Used to set the log driver for the container. For example log_driver "k8s-file". | |
| log_level string |
| Logging level for Podman. Log messages above specified level ("debug"|"info"|"warn"|"error"|"fatal"|"panic") (default "error") | |
| log_opt dictionary | Logging driver specific options. Used to set the path to the container log file. aliases: log_options | ||
| max_size string | Specify a max size of the log file (e.g 10mb). | ||
| path string | Specify a path to the log file (e.g. /var/log/container/mycontainer.json). | ||
| tag string | Specify a custom log tag for the container. | ||
| mac_address string | Specify a MAC address for the container, for example '92:d0:c6:0a:29:33'. Don't forget that it must be unique within one Ethernet network. | ||
| memory string | Memory limit (format 10k, where unit = b, k, m or g) Note - idempotency is supported for integers only. | ||
| memory_reservation string | Memory soft limit (format 100m, where unit = b, k, m or g) Note - idempotency is supported for integers only. | ||
| memory_swap string | A limit value equal to memory plus swap. Must be used with the -m (--memory) flag. The swap LIMIT should always be larger than -m (--memory) value. By default, the swap LIMIT will be set to double the value of --memory Note - idempotency is supported for integers only. | ||
| memory_swappiness integer | Tune a container's memory swappiness behavior. Accepts an integer between 0 and 100. | ||
| mount string | Attach a filesystem mount to the container. bind or tmpfs For example mount "type=bind,source=/path/on/host,destination=/path/in/container" | ||
| name string / required | Name of the container | ||
| network list / elements=string | Set the Network mode for the container * bridge create a network stack on the default bridge * none no networking * container:<name|id> reuse another container's network stack * host use the podman host network stack. * <network-name>|<network-id> connect to a user-defined network * ns:<path> path to a network namespace to join * slirp4netns use slirp4netns to create a user network stack. This is the default for rootless containers aliases: net, network_mode | ||
| no_hosts boolean |
| Do not create /etc/hosts for the container Default is false. | |
| oom_kill_disable boolean |
| Whether to disable OOM Killer for the container or not. Default is false. | |
| oom_score_adj integer | Tune the host's OOM preferences for containers (accepts -1000 to 1000) | ||
| pid string | Set the PID mode for the container aliases: pid_mode | ||
| pids_limit string | Tune the container's PIDs limit. Set -1 to have unlimited PIDs for the container. | ||
| pod string | Run container in an existing pod. If you want podman to make the pod for you, preference the pod name with "new:" | ||
| privileged boolean |
| Give extended privileges to this container. The default is false. | |
| publish list / elements=string | Publish a container's port, or range of ports, to the host. Format - ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort | containerPort In case of only containerPort is set, the hostPort will chosen randomly by Podman. aliases: ports, published, published_ports | ||
| publish_all boolean |
| Publish all exposed ports to random ports on the host interfaces. The default is false. | |
| read_only boolean |
| Mount the container's root filesystem as read only. Default is false | |
| read_only_tmpfs boolean |
| If container is running in --read-only mode, then mount a read-write tmpfs on /run, /tmp, and /var/tmp. The default is true | |
| recreate boolean |
| Use with present and started states to force the re-creation of an existing container. | |
| restart_policy string | Restart policy to follow when containers exit. Restart policy will not take effect if a container is stopped via the podman kill or podman stop commands. Valid values are * no - Do not restart containers on exit * on-failure[:max_retries] - Restart containers when they exit with a non-0 exit code, retrying indefinitely or until the optional max_retries count is hit * always - Restart containers when they exit, regardless of status, retrying indefinitely | ||
| rm boolean |
| Automatically remove the container when it exits. The default is false. aliases: remove, auto_remove | |
| rootfs boolean |
| If true, the first argument refers to an exploded container on the file system. The default is false. | |
| secrets list / elements=string | Add the named secrets into the container at /run/secrets. | ||
| security_opt list / elements=string | Security Options. For example security_opt "seccomp=unconfined" | ||
| shm_size string | Size of /dev/shm. The format is <number><unit>. number must be greater than 0. Unit is optional and can be b (bytes), k (kilobytes), m(megabytes), or g (gigabytes). If you omit the unit, the system uses bytes. If you omit the size entirely, the system uses 64m | ||
| sig_proxy boolean |
| Proxy signals sent to the podman run command to the container process. SIGCHLD, SIGSTOP, and SIGKILL are not proxied. The default is true. | |
| state string |
|
absent - A container matching the specified name will be stopped and removed.
present - Asserts the existence of a container matching the name and any provided configuration parameters. If no container matches the name, a container will be created. If a container matches the name but the provided configuration does not match, the container will be updated, if it can be. If it cannot be updated, it will be removed and re-created with the requested config. Image version will be taken into account when comparing configuration. Use the recreate option to force the re-creation of the matching container.
started - Asserts there is a running container matching the name and any provided configuration. If no container matches the name, a container will be created and started. Use recreate to always re-create a matching container, even if it is running. Use force_restart to force a matching container to be stopped and restarted.
stopped - Asserts that the container is first present, and then if the container is running moves it to a stopped state.
created - Asserts that the container exists with given configuration. If container doesn't exist, the module creates it and leaves it in 'created' state. If configuration doesn't match or 'recreate' option is set, the container will be recreated | |
| stop_signal integer | Signal to stop a container. Default is SIGTERM. | ||
| stop_timeout integer | Timeout (in seconds) to stop a container. Default is 10. | ||
| subgidname string | Run the container in a new user namespace using the map with 'name' in the /etc/subgid file. | ||
| subuidname string | Run the container in a new user namespace using the map with 'name' in the /etc/subuid file. | ||
| sysctl dictionary | Configure namespaced kernel parameters at runtime | ||
| systemd string | Run container in systemd mode. The default is true. | ||
| timezone string | Set timezone in container. This flag takes area-based timezones, GMT time, as well as local, which sets the timezone in the container to match the host machine. See /usr/share/zoneinfo/ for valid timezones. Remote connections use local containers.conf for defaults. | ||
| tmpfs dictionary | Create a tmpfs mount. For example tmpfs "/tmp" "rw,size=787448k,mode=1777" | ||
| tty boolean |
| Allocate a pseudo-TTY. The default is false. | |
| uidmap list / elements=string | Run the container in a new user namespace using the supplied mapping. | ||
| ulimit list / elements=string | Ulimit options aliases: ulimits | ||
| user string | Sets the username or UID used and optionally the groupname or GID for the specified command. | ||
| userns string | Set the user namespace mode for the container. It defaults to the PODMAN_USERNS environment variable. An empty value means user namespaces are disabled. aliases: userns_mode | ||
| uts string | Set the UTS mode for the container | ||
| volume list / elements=string | Create a bind mount. If you specify, volume /HOST-DIR:/CONTAINER-DIR, podman bind mounts /HOST-DIR in the host to /CONTAINER-DIR in the podman container. aliases: volumes | ||
| volumes_from list / elements=string | Mount volumes from the specified container(s). | ||
| workdir string | Working directory inside the container. The default working directory for running binaries within a container is the root directory (/). aliases: working_dir | ||
- name: Run container
containers.podman.podman_container:
name: container
image: quay.io/bitnami/wildfly
state: started
- name: Create a data container
containers.podman.podman_container:
name: mydata
image: busybox
volume:
- /tmp/data
- name: Re-create a redis container with systemd service file generated in /tmp/
containers.podman.podman_container:
name: myredis
image: redis
command: redis-server --appendonly yes
state: present
recreate: yes
expose:
- 6379
volumes_from:
- mydata
generate_systemd:
path: /tmp/
restart_policy: always
time: 120
names: true
container_prefix: ainer
- name: Restart a container
containers.podman.podman_container:
name: myapplication
image: redis
state: started
restart: yes
etc_hosts:
other: "127.0.0.1"
restart_policy: "no"
device: "/dev/sda:/dev/xvda:rwm"
ports:
- "8080:9000"
- "127.0.0.1:8081:9001/udp"
env:
SECRET_KEY: "ssssh"
BOOLEAN_KEY: "yes"
- name: Container present
containers.podman.podman_container:
name: mycontainer
state: present
image: ubuntu:14.04
command: "sleep 1d"
- name: Stop a container
containers.podman.podman_container:
name: mycontainer
state: stopped
- name: Start 4 load-balanced containers
containers.podman.podman_container:
name: "container{{ item }}"
recreate: yes
image: someuser/anotherappimage
command: sleep 1d
with_sequence: count=4
- name: remove container
containers.podman.podman_container:
name: ohno
state: absent
- name: Writing output
containers.podman.podman_container:
name: myservice
image: busybox
log_options: path=/var/log/container/mycontainer.json
log_driver: k8s-file
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| container dictionary | always | Facts representing the current state of the container. Matches the podman inspection output. Note that facts are part of the registered vars since Ansible 2.8. For compatibility reasons, the facts are also accessible directly as podman_container. Note that the returned fact will be removed in Ansible 2.12.Empty if state is absent.Sample: { "AppArmorProfile": "", "Args": [ "sh" ], "BoundingCaps": [ "CAP_CHOWN", ... ], "Config": { "Annotations": { "io.kubernetes.cri-o.ContainerType": "sandbox", "io.kubernetes.cri-o.TTY": "false" }, "AttachStderr": false, "AttachStdin": false, "AttachStdout": false, "Cmd": [ "sh" ], "Domainname": "", "Entrypoint": "", "Env": [ "PATH=/usr/sbin:/usr/bin:/sbin:/bin", "TERM=xterm", "HOSTNAME=", "container=podman" ], "Hostname": "", "Image": "docker.io/library/busybox:latest", "Labels": null, "OpenStdin": false, "StdinOnce": false, "StopSignal": 15, "Tty": false, "User": { "gid": 0, "uid": 0 }, "Volumes": null, "WorkingDir": "/" }, "ConmonPidFile": "...", "Created": "2019-06-17T19:13:09.873858307+03:00", "Dependencies": [], "Driver": "overlay", "EffectiveCaps": [ "CAP_CHOWN", ... ], "ExecIDs": [], "ExitCommand": [ "/usr/bin/podman", "--root", ... ], "GraphDriver": { ... }, "HostConfig": { ... }, "HostnamePath": "...", "HostsPath": "...", "ID": "...", "Image": "...", "ImageName": "docker.io/library/busybox:latest", "IsInfra": false, "LogPath": "/tmp/container/mycontainer.json", "MountLabel": "system_u:object_r:container_file_t:s0:c282,c782", "Mounts": [ ... ], "Name": "myservice", "Namespace": "", "NetworkSettings": { "Bridge": "", ... }, "Path": "sh", "ProcessLabel": "system_u:system_r:container_t:s0:c282,c782", "ResolvConfPath": "...", "RestartCount": 0, "Rootfs": "", "State": { "Dead": false, "Error": "", "ExitCode": 0, "FinishedAt": "2019-06-17T19:13:10.157518963+03:00", "Healthcheck": { "FailingStreak": 0, "Log": null, "Status": "" }, "OOMKilled": false, "OciVersion": "1.0.1-dev", "Paused": false, "Pid": 4083, "Restarting": false, "Running": false, "StartedAt": "2019-06-17T19:13:10.152479729+03:00", "Status": "exited" }, "StaticDir": "..." ... } |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/containers/podman/podman_container_module.html