Note
This plugin is part of the dellemc.openmanage collection (version 3.6.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install dellemc.openmanage.
To use it in a playbook, specify: dellemc.openmanage.idrac_network.
New in version 2.1.0: of dellemc.openmanage
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| auto_config string |
| Allows to enable or disable auto-provisioning to automatically acquire domain name from DHCP. |
| auto_detect string |
| Allows to auto detect the available NIC types used by iDRAC. |
| auto_negotiation string |
| Allows iDRAC to automatically set the duplex mode and network speed. |
| dns_from_dhcp string |
| Allows to enable DHCP to obtain DNS server address. |
| dns_idrac_name string | Name of the DNS to register iDRAC. | |
| duplex_mode string |
| Select the type of data transmission for the NIC. |
| enable_dhcp string |
| Allows to enable or disable Dynamic Host Configuration Protocol (DHCP) in iDRAC. |
| enable_ipv4 string |
| Allows to enable or disable IPv4 configuration. |
| enable_nic string |
| Allows to enable or disable the Network Interface Controller (NIC) used by iDRAC. |
| failover_network string |
| Select one of the remaining LOMs. If a network fails, the traffic is routed through the failover network. |
| idrac_ip string / required | iDRAC IP Address. | |
| idrac_password string / required | iDRAC user password. aliases: idrac_pwd | |
| idrac_port integer | Default: 443 | iDRAC port. |
| idrac_user string / required | iDRAC username. | |
| ip_address string | Enter a valid iDRAC static IPv4 address. | |
| network_speed string |
| Select the network speed for the selected NIC. |
| nic_mtu integer | Maximum Transmission Unit of the NIC. | |
| nic_selection string |
| Select one of the available NICs. |
| register_idrac_on_dns string |
| Registers iDRAC on a Domain Name System (DNS). |
| setup_idrac_nic_vlan string |
| Allows to configure VLAN on iDRAC. |
| share_mnt string | Local mount path of the network share with read-write permission for ansible user. This option is mandatory for network shares. | |
| share_name string / required | Network share or a local path. | |
| share_password string | Network share user password. This option is mandatory for CIFS share. aliases: share_pwd | |
| share_user string | Network share user name. Use the format 'user@domain' or 'domain\\user' if user is part of a domain. This option is mandatory for CIFS share. | |
| static_dns string | Enter the static DNS domain name. | |
| static_dns_1 string | Enter the preferred static DNS server IPv4 address. | |
| static_dns_2 string | Enter the preferred static DNS server IPv4 address. | |
| static_gateway string | Enter the static IPv4 gateway address to iDRAC. | |
| static_net_mask string | Enter the static IP subnet mask to iDRAC. | |
| vlan_id integer | Enter the VLAN ID. The VLAN ID must be a number from 1 through 4094. | |
| vlan_priority integer | Enter the priority for the VLAN ID. The priority value must be a number from 0 through 7. |
Note
check_mode.---
- name: Configure iDRAC network settings
dellemc.openmanage.idrac_network:
idrac_ip: "192.168.0.1"
idrac_user: "user_name"
idrac_password: "user_password"
share_name: "192.168.0.1:/share"
share_password: "share_pwd"
share_user: "share_user"
share_mnt: "/mnt/share"
register_idrac_on_dns: Enabled
dns_idrac_name: None
auto_config: None
static_dns: None
setup_idrac_nic_vlan: Enabled
vlan_id: 0
vlan_priority: 1
enable_nic: Enabled
nic_selection: Dedicated
failover_network: T_None
auto_detect: Disabled
auto_negotiation: Enabled
network_speed: T_1000
duplex_mode: Full
nic_mtu: 1500
ip_address: "192.168.0.1"
enable_dhcp: Enabled
enable_ipv4: Enabled
static_dns_1: "192.168.0.1"
static_dns_2: "192.168.0.1"
dns_from_dhcp: Enabled
static_gateway: None
static_net_mask: None
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| error_info dictionary | on HTTP error | Details of the HTTP Error. Sample: {'error': {'@Message.ExtendedInfo': [{'Message': 'Unable to process the request because an error occurred.', 'MessageArgs': [], 'MessageId': 'GEN1234', 'RelatedProperties': [], 'Resolution': 'Retry the operation. If the issue persists, contact your system administrator.', 'Severity': 'Critical'}], 'code': 'Base.1.0.GeneralError', 'message': 'A general error has occurred. See ExtendedInfo for more information.'}} |
| msg string | always | Successfully configured the idrac network settings. Sample: Successfully configured the idrac network settings. |
| network_status dictionary | success | Status of the Network settings operation job. Sample: {'@odata.context': '/redfish/v1/$metadata#DellJob.DellJob', '@odata.id': '/redfish/v1/Managers/iDRAC.Embedded.1/Jobs/JID_856418531008', '@odata.type': '#DellJob.v1_0_2.DellJob', 'CompletionTime': '2020-03-31T03:04:15', 'Description': 'Job Instance', 'EndTime': None, 'Id': 'JID_856418531008', 'JobState': 'Completed', 'JobType': 'ImportConfiguration', 'Message': 'Successfully imported and applied Server Configuration Profile.', 'MessageArgs': [], '[email protected]': 0, 'MessageId': 'SYS053', 'Name': 'Import Configuration', 'PercentComplete': 100, 'StartTime': 'TIME_NOW', 'Status': 'Success', 'TargetSettingsURI': None, 'retval': True} |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/dellemc/openmanage/idrac_network_module.html