W3cubDocs

/Ansible

dellemc.openmanage.ome_discovery – Create, modify, or delete a discovery job on OpenManage Enterprise

Note

This plugin is part of the dellemc.openmanage collection (version 3.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.openmanage.

To use it in a playbook, specify: dellemc.openmanage.ome_discovery.

New in version 3.3.0: of dellemc.openmanage

Synopsis

  • This module allows to create, modify, or delete a discovery job.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7.17

Parameters

Parameter Choices/Defaults Comments
community_string
boolean
    Choices:
  • no
  • yes
Enable the use of SNMP community strings to receive SNMP traps using Application Settings in OpenManage Enterprise. This option is available only for the discovered iDRAC servers and MX7000 chassis.
cron
string
Provide a cron expression based on Quartz cron format.
discovery_config_targets
list / elements=dictionary
Provide the list of discovery targets.
Each discovery target is a set of network_address_detail, device_types, and one or more protocol credentials.
This is mandatory when state is present.
WARNING Modification of this field is not supported, this field is overwritten every time. Ensure to provide all the required details for this field.
device_types
list / elements=string / required
Provide the type of devices to be discovered.
The accepted types are SERVER, CHASSIS, NETWORK SWITCH, and STORAGE.
A combination or all of the above can be provided.
Supported protocols for each device type are:
SERVER - wsman, redfish, snmp, ipmi, ssh, and vmware.
CHASSIS - wsman, and redfish.
NETWORK SWITCH - snmp.
STORAGE - storage, and snmp.
ipmi
dictionary
Intelligent Platform Management Interface (IPMI)
kgkey
string
KgKey for the IPMI protocol.
password
string / required
Provide a password for the protocol.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
network_address_detail
list / elements=string / required
Provide the list of IP addresses, host names, or the range of IP addresses of the devices to be discovered or included.
Sample Valid IP Range Formats
192.35.0.0
192.36.0.0-10.36.0.255
192.37.0.0/24
2345:f2b1:f083:135::5500/118
2345:f2b1:f083:135::a500-2607:f2b1:f083:135::a600
hostname.domain.tld
hostname
2345:f2b1:f083:139::22a
Sample Invalid IP Range Formats
192.35.0.*
192.36.0.0-255
192.35.0.0/255.255.255.0
NOTE The range size for the number of IP addresses is limited to 16,385 (0x4001).
NOTE Both IPv6 and IPv6 CIDR formats are supported.
redfish
dictionary
REDFISH protocol.
ca_check
boolean
    Choices:
  • no
  • yes
Enable the Certificate Authority (CA) check.
certificate_data
string
Provide certificate data for the CA check.
cn_check
boolean
    Choices:
  • no
  • yes
Enable the Common Name (CN) check.
domain
string
Provide a domain for the protocol.
password
string / required
Provide a password for the protocol.
port
integer
Default:
443
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
snmp
dictionary
Simple Network Management Protocol (SNMP).
community
string / required
Community string for the SNMP protocol.
port
integer
Default:
161
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
3
Enter the time in seconds after which a job must stop running.
ssh
dictionary
Secure Shell (SSH).
check_known_hosts
boolean
    Choices:
  • no
  • yes
Verify the known host key.
is_sudo_user
boolean
    Choices:
  • no
  • yes
Use the SUDO option.
password
string / required
Provide a password for the protocol.
port
integer
Default:
22
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
storage
dictionary
HTTPS Storage protocol.
ca_check
boolean
    Choices:
  • no
  • yes
Enable the Certificate Authority (CA) check.
certificate_data
string
Provide certificate data for the CA check.
cn_check
boolean
    Choices:
  • no
  • yes
Enable the Common Name (CN) check.
domain
string
Provide a domain for the protocol.
password
string / required
Provide a password for the protocol.
port
integer
Default:
443
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
vmware
dictionary
VMWARE protocol.
ca_check
boolean
    Choices:
  • no
  • yes
Enable the Certificate Authority (CA) check.
certificate_data
string
Provide certificate data for the CA check.
cn_check
boolean
    Choices:
  • no
  • yes
Enable the Common Name (CN) check.
domain
string
Provide a domain for the protocol.
password
string / required
Provide a password for the protocol.
port
integer
Default:
443
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
wsman
dictionary
Web Services-Management (WS-Man).
ca_check
boolean
    Choices:
  • no
  • yes
Enable the Certificate Authority (CA) check.
certificate_data
string
Provide certificate data for the CA check.
cn_check
boolean
    Choices:
  • no
  • yes
Enable the Common Name (CN) check.
domain
string
Provide a domain for the protocol.
password
string / required
Provide a password for the protocol.
port
integer
Default:
443
Enter the port number that the job must use to discover the devices.
retries
integer
Default:
3
Enter the number of repeated attempts required to discover a device.
timeout
integer
Default:
60
Enter the time in seconds after which a job must stop running.
username
string / required
Provide a username for the protocol.
discovery_id
integer
ID of the discovery configuration group.
This value is DiscoveryConfigGroupId in the return values under discovery_status.
It is mutually exclusive with discovery_job_name.
discovery_job_name
string
Name of the discovery configuration job.
It is mutually exclusive with discovery_id.
email_recipient
string
Enter the email address to which notifications are to be sent about the discovery job status. Configure the SMTP settings to allow sending notifications to an email address.
hostname
string / required
OpenManage Enterprise IP address or hostname.
ignore_partial_failure
boolean
    Choices:
  • no
  • yes
Provides the option to ignore partial failures. Partial failures occur when there is a combination of both discovered and undiscovered IPs.
If False, then the partial failure is not ignored, and the module will error out.
If True, then the partial failure is ignored.
This option is only applicable if job_wait is True.
job_wait
boolean
    Choices:
  • no
  • yes
Provides the option to wait for job completion.
This option is applicable when state is present.
job_wait_timeout
integer
Default:
10800
The maximum wait time of job_wait in seconds. The job is tracked only for this duration.
This option is applicable when job_wait is True.
new_name
string
New name of the discovery configuration job.
password
string / required
OpenManage Enterprise password.
port
integer
Default:
443
OpenManage Enterprise HTTPS port.
schedule
string
    Choices:
  • RunNow
  • RunLater
Provides the option to schedule the discovery job.
If RunLater is selected, then cron must be specified.
state
string
    Choices:
  • present
  • absent
present creates a discovery job or modifies an existing discovery job.
discovery_job_name is mandatory for the creation of a new discovery job.
If multiple discoveries of the same discovery_job_name exist, then the new discovery job will not be created.
absent deletes an existing discovery job(s) with the specified discovery_job_name.
trap_destination
boolean
    Choices:
  • no
  • yes
Enable OpenManage Enterprise to receive the incoming SNMP traps from the discovered devices.
This is effective only for servers discovered by using their iDRAC interface.
username
string / required
OpenManage Enterprise username.

Notes

Note

  • Run this module from a system that has direct access to Dell EMC OpenManage Enterprise.
  • This module does not support check_mode.
  • If state is present, then Idempotency is not supported.

Examples

---
- name: Discover servers in a range
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discovery_server_1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.1-192.96.24.255
        device_types:
          - SERVER
        wsman:
          username: user
          password: password

- name: Discover chassis in a range
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discovery_chassis_1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.1-192.96.24.255
        device_types:
          - CHASSIS
        wsman:
          username: user
          password: password

- name: Discover switches in a range
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discover_switch_1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.1-192.96.24.255
        device_types:
          - NETWORK SWITCH
        snmp:
          community: snmp_creds

- name: Discover storage in a range
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discover_storage_1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.1-192.96.24.255
        device_types:
          - STORAGE
        storage:
          username: user
          password: password
        snmp:
          community: snmp_creds

- name: Delete a discovery job
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    state: "absent"
    discovery_job_name: "Discovery-123"

- name: Schedule the discovery of multiple devices ignoring partial failure and enable trap to receive alerts
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    state: "present"
    discovery_job_name: "Discovery-123"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.1-192.96.24.255
          - 192.96.0.0/24
          - 192.96.26.108
        device_types:
          - SERVER
          - CHASSIS
          - STORAGE
          - NETWORK SWITCH
        wsman:
          username: wsman_user
          password: wsman_pwd
        redfish:
          username: redfish_user
          password: redfish_pwd
        snmp:
          community: snmp_community
      - network_address_detail:
          - 192.96.25.1-192.96.25.255
          - ipmihost
          - esxiserver
          - sshserver
        device_types:
          - SERVER
        ssh:
          username: ssh_user
          password: ssh_pwd
        vmware:
          username: vm_user
          password: vmware_pwd
        ipmi:
          username: ipmi_user
          password: ipmi_pwd
    schedule: RunLater
    cron: "0 0 9 ? * MON,WED,FRI *"
    ignore_partial_failure: True
    trap_destination: True
    community_string: True
    email_recipient: [email protected]

- name: Discover servers with ca check enabled
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discovery_server_ca1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.108
        device_types:
          - SERVER
        wsman:
          username: user
          password: password
          ca_check: True
          certificate_data: "{{ lookup('ansible.builtin.file', '/path/to/certificate_data_file') }}"

- name: Discover chassis with ca check enabled data
  dellemc.openmanage.ome_discovery:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    discovery_job_name: "Discovery_chassis_ca1"
    discovery_config_targets:
      - network_address_detail:
          - 192.96.24.108
        device_types:
          - CHASSIS
        redfish:
          username: user
          password: password
          ca_check: True
          certificate_data: "-----BEGIN CERTIFICATE-----\r\n
          ABCDEFGHIJKLMNOPQRSTUVWXYZaqwertyuiopasdfghjklzxcvbnmasdasagasvv\r\n
          ABCDEFGHIJKLMNOPQRSTUVWXYZaqwertyuiopasdfghjklzxcvbnmasdasagasvv\r\n
          ABCDEFGHIJKLMNOPQRSTUVWXYZaqwertyuiopasdfghjklzxcvbnmasdasagasvv\r\n
          aqwertyuiopasdfghjklzxcvbnmasdasagasvv=\r\n
          -----END CERTIFICATE-----"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
discovery_ids
list / elements=string
when discoveries with duplicate name exist for state is present
IDs of the discoveries with duplicate names.

Sample:
[1234, 5678]
discovery_status
dictionary
when state is present
Details of the discovery job created or modified.
If job_wait is true, Completed and Failed IPs are also listed.

Sample:
{'Completed': ['192.168.24.17', '192.168.24.20', '192.168.24.22'], 'DiscoveredDevicesByType': [{'Count': 3, 'DeviceType': 'SERVER'}], 'DiscoveryConfigDiscoveredDeviceCount': 3, 'DiscoveryConfigEmailRecipient': '[email protected]', 'DiscoveryConfigExpectedDeviceCount': 9, 'DiscoveryConfigGroupId': 125, 'Failed': ['192.168.24.15', '192.168.24.16', '192.168.24.18', '192.168.24.19', '192.168.24.21', 'host123'], 'JobDescription': 'D1', 'JobEnabled': True, 'JobEndTime': '2021-01-01 06:27:29.99', 'JobId': 12666, 'JobName': 'D1', 'JobNextRun': None, 'JobProgress': '100', 'JobSchedule': 'startnow', 'JobStartTime': '2021-01-01 06:24:10.071', 'JobStatusId': 2090, 'LastUpdateTime': '2021-01-01 06:27:30.001', 'UpdatedBy': 'admin'}
error_info
dictionary
on HTTP error
Details of the HTTP Error.

Sample:
{'error': {'@Message.ExtendedInfo': [{'Message': 'Unable to process the request because an error occurred.', 'MessageArgs': [], 'MessageId': 'GEN1234', 'RelatedProperties': [], 'Resolution': 'Retry the operation. If the issue persists, contact your system administrator.', 'Severity': 'Critical'}], 'code': 'Base.1.0.GeneralError', 'message': 'A general error has occurred. See ExtendedInfo for more information.'}}
msg
string
always
Overall status of the discovery operation.

Sample:
Successfully deleted 1 discovery job(s).


Authors

  • Jagadeesh N V (@jagadeeshnv)
  • Sajna Shetty (@Sajna-Shetty)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/dellemc/openmanage/ome_discovery_module.html