W3cubDocs

/Ansible

f5networks.f5_modules.bigip_vlan – Manage VLANs on a BIG-IP system

Note

This plugin is part of the f5networks.f5_modules collection (version 1.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_vlan.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

  • Manage VLANs on a BIG-IP system

Parameters

Parameter Choices/Defaults Comments
cmp_hash
string
    Choices:
  • default
  • destination-address
  • source-address
  • dst-ip
  • src-ip
  • dest
  • destination
  • source
  • dst
  • src
Specifies how the traffic on the VLAN is disaggregated. The value you select determines the traffic disaggregation method. You can choose to disaggregate traffic based on source-address (the source IP address), destination-address (destination IP address), or default, which specifies the default CMP hash uses L4 ports.
When creating a new VLAN, if this parameter is not specified, the default is default.
dag_round_robin
boolean
    Choices:
  • no
  • yes
Specifies whether some of the stateless traffic on the VLAN should be disaggregated in a round-robin order instead of using a static hash. The stateless traffic includes non-IP L2 traffic, ICMP, some UDP protocols, and so on.
When creating a new VLAN, if this parameter is not specified, the default is (no).
dag_tunnel
string
    Choices:
  • inner
  • outer
Specifies how the disaggregator (DAG) distributes received tunnel-encapsulated packets to TMM instances. Select inner to distribute packets based on information in inner headers. Select outer to distribute packets based on information in outer headers without inspecting inner headers.
When creating a new VLAN, if this parameter is not specified, the default is outer.
This parameter is not supported on Virtual Editions (VEs) of BIG-IP.
description
string
The description of the VLAN.
fail_safe
boolean
    Choices:
  • no
  • yes
When yes, specifies the VLAN takes the specified fail_safe_action if the system detects a loss of traffic on this VLAN's interfaces.
fail_safe_action
string
    Choices:
  • reboot
  • restart-all
  • failover
Specifies the action the system takes when it does not detect any traffic on this VLAN, and the fail_safe_timeout has expired.
fail_safe_timeout
integer
Specifies the number of seconds a system can run without detecting network traffic on this VLAN before it takes the fail_safe_action.
hw_syn_cookie
boolean
added in 1.3.0 of f5networks.f5_modules
    Choices:
  • no
  • yes
Enables hardware syncookie mode on a VLAN.
When yes, the hardware per-VLAN SYN cookie protection is triggered when the certain traffic threshold is reached on supported platforms.
interfaces
list / elements=dictionary
Interfaces you want to add to the VLAN. This can include both tagged and untagged interfaces, as the tagging parameter specifies.
This parameter is mutually exclusive with the untagged_interfaces and tagged_interfaces parameters.
interface
string
The name of the interface
tagging
string
    Choices:
  • tagged
  • untagged
Whether the interface is tagged or untagged.
mtu
integer
Specifies the maximum transmission unit (MTU) for traffic on this VLAN. When creating a new VLAN, if this parameter is not specified, the default value used is 1500.
This number must be between 576 to 9198.
name
string / required
The VLAN to manage. If the special VLAN ALL is specified with the state value of absent, all VLANs will be removed.
partition
string
Default:
"Common"
Device partition to manage resources on.
provider
dictionary
added in 1.0.0 of f5networks.f5_modules
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no ←
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TELEMETRY_OFF.
Previously used variable F5_TEEM is deprecated as its name was confusing.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
sflow_poll_interval
integer
Specifies the maximum interval in seconds between two pollings.
sflow_sampling_rate
integer
Specifies the ratio of packets observed to the samples generated.
source_check
boolean
    Choices:
  • no
  • yes
When yes, specifies the system verifies the return route to an initial packet is the same VLAN from which the packet originated.
The system performs this verification only if the auto_last_hop option is no.
state
string
    Choices:
  • absent
  • present ←
The state of the VLAN on the system. When present, guarantees the VLAN exists with the provided attributes. When absent, removes the VLAN from the system.
tag
integer
Tag number for the VLAN. The tag number can be any integer between 1 and 4094. The system automatically assigns a tag number if you do not specify a value.
tagged_interfaces
list / elements=string
Specifies a list of tagged interfaces and trunks you want to configure for the VLAN. Use tagged interfaces or trunks when you want to assign a single interface or trunk to multiple VLANs.
This parameter is mutually exclusive with the untagged_interfaces and interfaces parameters.

aliases: tagged_interface
untagged_interfaces
list / elements=string
Specifies a list of untagged interfaces and trunks you want to configure for the VLAN.
This parameter is mutually exclusive with the tagged_interfaces and interfaces parameters.

aliases: untagged_interface

Notes

Note

  • Requires BIG-IP versions >= 12.0.0
  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create VLAN
  bigip_vlan:
    name: net1
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set VLAN tag
  bigip_vlan:
    name: net1
    tag: 2345
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Add VLAN 2345 as tagged to interface 1.1
  bigip_vlan:
    tagged_interface: 1.1
    name: net1
    tag: 2345
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Add VLAN 1234 as tagged to interfaces 1.1 and 1.2
  bigip_vlan:
    tagged_interfaces:
      - 1.1
      - 1.2
    name: net1
    tag: 1234
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
cmp_hash
string
changed
New traffic disaggregation method.

Sample:
source-address
dag_tunnel
string
changed
The new DAG tunnel setting.

Sample:
outer
description
string
changed
The description set on the VLAN.

Sample:
foo VLAN
fail_safe
boolean
changed
The new Fail Safe setting.
fail_safe_action
string
changed
The new Fail Safe Action setting.

Sample:
reboot
fail_safe_timeout
integer
changed
The new Fail Safe Timeout setting.

Sample:
90
hw_syn_cookie
boolean
changed
Enables hardware syncookie mode on a VLAN.
interfaces
list / elements=string
changed
Interfaces the VLAN is assigned to.

Sample:
['1.1', '1.2']
partition
string
changed
The partition the VLAN was created on.

Sample:
Common
sflow_poll_interval
integer
changed
The new sFlow Polling Interval setting.

Sample:
10
sflow_sampling_rate
integer
changed
The new sFlow Sampling Rate setting.

Sample:
20
source_check
boolean
changed
The new Source Check setting.

Sample:
True
tag
integer
changed
The ID of the VLAN.

Sample:
2345


Authors

  • Tim Rupp (@caphrim007)
  • Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/f5networks/f5_modules/bigip_vlan_module.html