W3cubDocs

/Ansible

fortinet.fortios.fortios_extender_controller_extender – Extender controller configuration in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_extender_controller_extender.

New in version 2.10: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify extender_controller feature and extender category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
enable_log
boolean
    Choices:
  • no
  • yes
Enable/Disable logging for task.
extender_controller_extender
dictionary
Extender controller configuration.
aaa_shared_secret
string
AAA shared secret.
access_point_name
string
Access point name(APN).
admin
string
    Choices:
  • disable
  • discovered
  • enable
FortiExtender Administration (enable or disable).
at_dial_script
string
Initialization AT commands specific to the MODEM.
authorized
string
    Choices:
  • disable
  • enable
FortiExtender Administration (enable or disable).
billing_start_day
integer
Billing start day.
cdma_aaa_spi
string
CDMA AAA SPI.
cdma_ha_spi
string
CDMA HA SPI.
cdma_nai
string
NAI for CDMA MODEMS.
conn_status
integer
Connection status.
controller_report
dictionary
FortiExtender controller report configuration.
interval
integer
Controller report interval.
signal_threshold
integer
Controller report signal threshold.
status
string
    Choices:
  • disable
  • enable
FortiExtender controller report status.
description
string
Description.
dial_mode
string
    Choices:
  • dial-on-demand
  • always-connect
Dial mode (dial-on-demand or always-connect).
dial_status
integer
Dial status.
ext_name
string
FortiExtender name.
ha_shared_secret
string
HA shared secret.
id
string / required
FortiExtender serial number.
ifname
string
FortiExtender interface name. Source system.interface.name.
initiated_update
string
    Choices:
  • enable
  • disable
Allow/disallow network initiated updates to the MODEM.
login_password
string
FortiExtender login password.
mode
string
    Choices:
  • standalone
  • redundant
FortiExtender mode.
modem1
dictionary
Configuration options for modem 1.
auto_switch
dictionary
FortiExtender auto switch configuration.
dataplan
string
    Choices:
  • disable
  • enable
Automatically switch based on data usage.
disconnect
string
    Choices:
  • disable
  • enable
Auto switch by disconnect.
disconnect_period
integer
Automatically switch based on disconnect period.
disconnect_threshold
integer
Automatically switch based on disconnect threshold.
signal
string
    Choices:
  • disable
  • enable
Automatically switch based on signal strength.
switch_back
string
    Choices:
  • time
  • timer
Auto switch with switch back multi-options.
switch_back_time
string
Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switch_back_timer
integer
Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
conn_status
integer
Connection status.
default_sim
string
    Choices:
  • sim1
  • sim2
  • carrier
  • cost
Default SIM selection.
gps
string
    Choices:
  • disable
  • enable
FortiExtender GPS enable/disable.
ifname
string
FortiExtender interface name. Source system.interface.name.
preferred_carrier
string
Preferred carrier.
redundant_intf
string
Redundant interface.
redundant_mode
string
    Choices:
  • disable
  • enable
FortiExtender mode.
sim1_pin
string
    Choices:
  • disable
  • enable
SIM
sim1_pin_code
string
SIM
sim2_pin
string
    Choices:
  • disable
  • enable
SIM
sim2_pin_code
string
SIM
modem2
dictionary
Configuration options for modem 2.
auto_switch
dictionary
FortiExtender auto switch configuration.
dataplan
string
    Choices:
  • disable
  • enable
Automatically switch based on data usage.
disconnect
string
    Choices:
  • disable
  • enable
Auto switch by disconnect.
disconnect_period
integer
Automatically switch based on disconnect period.
disconnect_threshold
integer
Automatically switch based on disconnect threshold.
signal
string
    Choices:
  • disable
  • enable
Automatically switch based on signal strength.
switch_back
string
    Choices:
  • time
  • timer
Auto switch with switch back multi-options.
switch_back_time
string
Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switch_back_timer
integer
Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
conn_status
integer
Connection status.
default_sim
string
    Choices:
  • sim1
  • sim2
  • carrier
  • cost
Default SIM selection.
gps
string
    Choices:
  • disable
  • enable
FortiExtender GPS enable/disable.
ifname
string
FortiExtender interface name. Source system.interface.name.
preferred_carrier
string
Preferred carrier.
redundant_intf
string
Redundant interface.
redundant_mode
string
    Choices:
  • disable
  • enable
FortiExtender mode.
sim1_pin
string
    Choices:
  • disable
  • enable
SIM
sim1_pin_code
string
SIM
sim2_pin
string
    Choices:
  • disable
  • enable
SIM
sim2_pin_code
string
SIM
modem_passwd
string
MODEM password.
modem_type
string
    Choices:
  • cdma
  • gsm/lte
  • wimax
MODEM type (CDMA, GSM/LTE or WIMAX).
multi_mode
string
    Choices:
  • auto
  • auto-3g
  • force-lte
  • force-3g
  • force-2g
MODEM mode of operation(3G,LTE,etc).
name
string
FortiExtender entry name.
ppp_auth_protocol
string
    Choices:
  • auto
  • pap
  • chap
PPP authentication protocol (PAP,CHAP or auto).
ppp_echo_request
string
    Choices:
  • enable
  • disable
Enable/disable PPP echo request.
ppp_password
string
PPP password.
ppp_username
string
PPP username.
primary_ha
string
Primary HA.
quota_limit_mb
integer
Monthly quota limit (MB).
redial
string
    Choices:
  • none
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Number of redials allowed based on failed attempts.
redundant_intf
string
Redundant interface.
roaming
string
    Choices:
  • enable
  • disable
Enable/disable MODEM roaming.
role
string
    Choices:
  • none
  • primary
  • secondary
FortiExtender work role(Primary, Secondary, None).
secondary_ha
string
Secondary HA.
sim_pin
string
SIM PIN.
vdom
integer
VDOM
wimax_auth_protocol
string
    Choices:
  • tls
  • ttls
WiMax authentication protocol(TLS or TTLS).
wimax_carrier
string
WiMax carrier.
wimax_realm
string
WiMax realm.
state
string / required
    Choices:
  • present
  • absent
Indicates whether to create or remove the object.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Extender controller configuration.
    fortios_extender_controller_extender:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      extender_controller_extender:
        aaa_shared_secret: "<your_own_value>"
        access_point_name: "<your_own_value>"
        admin: "disable"
        at_dial_script: "<your_own_value>"
        authorized: "disable"
        billing_start_day: "8"
        cdma_aaa_spi: "<your_own_value>"
        cdma_ha_spi: "<your_own_value>"
        cdma_nai: "<your_own_value>"
        conn_status: "12"
        controller_report:
            interval: "14"
            signal_threshold: "15"
            status: "disable"
        description: "<your_own_value>"
        dial_mode: "dial-on-demand"
        dial_status: "19"
        ext_name: "<your_own_value>"
        ha_shared_secret: "<your_own_value>"
        id:  "22"
        ifname: "<your_own_value> (source system.interface.name)"
        initiated_update: "enable"
        login_password: "<your_own_value>"
        mode: "standalone"
        modem_passwd: "<your_own_value>"
        modem_type: "cdma"
        modem1:
            auto_switch:
                dataplan: "disable"
                disconnect: "disable"
                disconnect_period: "33"
                disconnect_threshold: "34"
                signal: "disable"
                switch_back: "time"
                switch_back_time: "<your_own_value>"
                switch_back_timer: "38"
            conn_status: "39"
            default_sim: "sim1"
            gps: "disable"
            ifname: "<your_own_value> (source system.interface.name)"
            preferred_carrier: "<your_own_value>"
            redundant_intf: "<your_own_value>"
            redundant_mode: "disable"
            sim1_pin: "disable"
            sim1_pin_code: "<your_own_value>"
            sim2_pin: "disable"
            sim2_pin_code: "<your_own_value>"
        modem2:
            auto_switch:
                dataplan: "disable"
                disconnect: "disable"
                disconnect_period: "54"
                disconnect_threshold: "55"
                signal: "disable"
                switch_back: "time"
                switch_back_time: "<your_own_value>"
                switch_back_timer: "59"
            conn_status: "60"
            default_sim: "sim1"
            gps: "disable"
            ifname: "<your_own_value> (source system.interface.name)"
            preferred_carrier: "<your_own_value>"
            redundant_intf: "<your_own_value>"
            redundant_mode: "disable"
            sim1_pin: "disable"
            sim1_pin_code: "<your_own_value>"
            sim2_pin: "disable"
            sim2_pin_code: "<your_own_value>"
        multi_mode: "auto"
        name: "default_name_72"
        ppp_auth_protocol: "auto"
        ppp_echo_request: "enable"
        ppp_password: "<your_own_value>"
        ppp_username: "<your_own_value>"
        primary_ha: "<your_own_value>"
        quota_limit_mb: "78"
        redial: "none"
        redundant_intf: "<your_own_value>"
        roaming: "enable"
        role: "none"
        secondary_ha: "<your_own_value>"
        sim_pin: "<your_own_value>"
        vdom: "85"
        wimax_auth_protocol: "tls"
        wimax_carrier: "<your_own_value>"
        wimax_realm: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_extender_controller_extender_module.html