W3cubDocs

/Ansible

fortinet.fortios.fortios_firewall_address – Configure IPv4 addresses in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_address.

New in version 2.10: of fortinet.fortios

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and address category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter				Choices/Defaults	Comments
access_token string					Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean				Choices: no ← yes	Enable/Disable logging for task.
firewall_address dictionary					Configure IPv4 addresses.
	allow_routing string			Choices: enable disable	Enable/disable use of this address in the static route configuration.
	associated_interface string				Network interface associated with address. Source system.interface.name system.zone.name.
	cache_ttl integer				Defines the minimal TTL of individual IP addresses in FQDN cache measured in seconds.
	clearpass_spt string			Choices: unknown healthy quarantine checkup transient infected	SPT (System Posture Token) value.
	color integer				Color of icon on the GUI.
	comment string				Comment.
	country string				IP addresses associated to a specific country.
	end_ip string				Final IP address (inclusive) in the range for the address.
	end_mac string				Last MAC address in the range.
	epg_name string				Endpoint group name.
	fabric_object string			Choices: enable disable	Security Fabric global object setting.
	filter string				Match criteria filter.
	fqdn string				Fully Qualified Domain Name address.
	fsso_group list / elements=string				FSSO group(s).
		name string / required			FSSO group name. Source user.adgrp.name.
	interface string				Name of interface whose IP address is to be used. Source system.interface.name.
	list list / elements=string				IP address list.
		ip string / required			IP.
		net_id string			Network ID.
		obj_id string			Object ID.
	macaddr list / elements=string				Multiple MAC address ranges.
		macaddr string / required			MAC address ranges <start>[-<end>] separated by space.
	name string / required				Address name.
	node_ip_only string			Choices: enable disable	Enable/disable collection of node addresses only in Kubernetes.
	obj_id string				Object ID for NSX.
	obj_tag string				Tag of dynamic address object.
	obj_type string			Choices: ip mac	Object type.
	organization string				Organization domain name (Syntax: organization/domain).
	policy_group string				Policy group name.
	sdn string			Choices: aci aws azure gcp nsx nuage oci openstack	SDN. Source system.sdn-connector.name.
	sdn_addr_type string			Choices: private public all	Type of addresses to collect.
	sdn_tag string				SDN Tag.
	start_ip string				First IP address (inclusive) in the range for the address.
	start_mac string				First MAC address in the range.
	sub_type string			Choices: sdn clearpass-spt fsso ems-tag	Sub-type of address.
	subnet string				IP address and subnet mask of address.
	subnet_name string				Subnet name.
	tagging list / elements=string				Config object tagging.
		category string			Tag category. Source system.object-tagging.category.
		name string / required			Tagging entry name.
		tags list / elements=string			Tags.
			name string / required		Tag name. Source system.object-tagging.tags.name.
	tenant string				Tenant.
	type string			Choices: ipmask iprange fqdn geography wildcard wildcard-fqdn dynamic interface-subnet mac	Type of address.
	uuid string				Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
	visibility string			Choices: enable disable	Enable/disable address visibility in the GUI.
	wildcard string				IP address and wildcard netmask.
	wildcard_fqdn string				Fully Qualified Domain Name with wildcard characters.
state string / required				Choices: present absent	Indicates whether to create or remove the object.
vdom string				Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4 addresses.
    fortios_firewall_address:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_address:
        allow_routing: "enable"
        associated_interface: "<your_own_value> (source system.interface.name system.zone.name)"
        cache_ttl: "5"
        clearpass_spt: "unknown"
        color: "7"
        comment: "Comment."
        country: "<your_own_value>"
        end_ip: "<your_own_value>"
        end_mac: "<your_own_value>"
        epg_name: "<your_own_value>"
        fabric_object: "enable"
        filter: "<your_own_value>"
        fqdn: "<your_own_value>"
        fsso_group:
         -
            name: "default_name_17 (source user.adgrp.name)"
        interface: "<your_own_value> (source system.interface.name)"
        list:
         -
            ip: "<your_own_value>"
            net_id: "<your_own_value>"
            obj_id: "<your_own_value>"
        macaddr:
         -
            macaddr: "<your_own_value>"
        name: "default_name_25"
        node_ip_only: "enable"
        obj_id: "<your_own_value>"
        obj_tag: "<your_own_value>"
        obj_type: "ip"
        organization: "<your_own_value>"
        policy_group: "<your_own_value>"
        sdn: "aci"
        sdn_addr_type: "private"
        sdn_tag: "<your_own_value>"
        start_ip: "<your_own_value>"
        start_mac: "<your_own_value>"
        sub_type: "sdn"
        subnet: "<your_own_value>"
        subnet_name: "<your_own_value>"
        tagging:
         -
            category: "<your_own_value> (source system.object-tagging.category)"
            name: "default_name_42"
            tags:
             -
                name: "default_name_44 (source system.object-tagging.tags.name)"
        tenant: "<your_own_value>"
        type: "ipmask"
        uuid: "<your_own_value>"
        visibility: "enable"
        wildcard: "<your_own_value>"
        wildcard_fqdn: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_address_module.html