W3cubDocs

/Ansible

fortinet.fortios.fortios_firewall_consolidated_policy – Configure consolidated IPv4/IPv6 policies in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_consolidated_policy.

New in version 2.10: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall_consolidated feature and policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
enable_log
boolean
    Choices:
  • no
  • yes
Enable/Disable logging for task.
firewall_consolidated_policy
dictionary
Configure consolidated IPv4/IPv6 policies.
action
string
    Choices:
  • accept
  • deny
  • ipsec
Policy action (allow/deny/ipsec).
application_list
string
Name of an existing Application list. Source application.list.name.
auto_asic_offload
string
    Choices:
  • enable
  • disable
Enable/disable policy traffic ASIC offloading.
av_profile
string
Name of an existing Antivirus profile. Source antivirus.profile.name.
captive_portal_exempt
string
    Choices:
  • enable
  • disable
Enable exemption of some users from the captive portal.
cifs_profile
string
Name of an existing CIFS profile. Source cifs.profile.name.
comments
string
Comment.
diffserv_forward
string
    Choices:
  • enable
  • disable
Enable to change packet"s DiffServ values to the specified diffservcode-forward value.
diffserv_reverse
string
    Choices:
  • enable
  • disable
Enable to change packet"s reverse (reply) DiffServ values to the specified diffservcode-rev value.
diffservcode_forward
string
Change packet"s DiffServ to this value.
diffservcode_rev
string
Change packet"s reverse (reply) DiffServ to this value.
dlp_sensor
string
Name of an existing DLP sensor. Source dlp.sensor.name.
dnsfilter_profile
string
Name of an existing DNS filter profile. Source dnsfilter.profile.name.
dstaddr4
list / elements=string
Destination IPv4 address name and address group names.
name
string / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource .name.
dstaddr6
list / elements=string
Destination IPv6 address name and address group names.
name
string / required
Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system .external-resource.name.
dstaddr_negate
string
    Choices:
  • enable
  • disable
When enabled dstaddr specifies what the destination address must NOT be.
dstintf
list / elements=string
Outgoing (egress) interface.
name
string / required
Interface name. Source system.interface.name system.zone.name.
emailfilter_profile
string
Name of an existing email filter profile. Source emailfilter.profile.name.
fixedport
string
    Choices:
  • enable
  • disable
Enable to prevent source NAT from changing a session"s source port.
fsso_groups
list / elements=string
Names of FSSO groups.
name
string / required
Names of FSSO groups. Source user.adgrp.name.
global_label
string
Label for the policy that appears when the GUI is in Global View mode.
groups
list / elements=string
Names of user groups that can authenticate with this policy.
name
string / required
Group name. Source user.group.name.
http_policy_redirect
string
    Choices:
  • enable
  • disable
Redirect HTTP(S) traffic to matching transparent web proxy policy.
icap_profile
string
Name of an existing ICAP profile. Source icap.profile.name.
inbound
string
    Choices:
  • enable
  • disable
Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN.
inspection_mode
string
    Choices:
  • proxy
  • flow
Policy inspection mode (Flow/proxy). Default is Flow mode.
internet_service
string
    Choices:
  • enable
  • disable
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.
internet_service_custom
list / elements=string
Custom Internet Service name.
name
string / required
Custom Internet Service name. Source firewall.internet-service-custom.name.
internet_service_custom_group
list / elements=string
Custom Internet Service group name.
name
string / required
Custom Internet Service group name. Source firewall.internet-service-custom-group.name.
internet_service_group
list / elements=string
Internet Service group name.
name
string / required
Internet Service group name. Source firewall.internet-service-group.name.
internet_service_id
list / elements=string
Internet Service ID.
id
integer / required
Internet Service ID. Source firewall.internet-service.id.
internet_service_negate
string
    Choices:
  • enable
  • disable
When enabled internet-service specifies what the service must NOT be.
internet_service_src
string
    Choices:
  • enable
  • disable
Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.
internet_service_src_custom
list / elements=string
Custom Internet Service source name.
name
string / required
Custom Internet Service name. Source firewall.internet-service-custom.name.
internet_service_src_custom_group
list / elements=string
Custom Internet Service source group name.
name
string / required
Custom Internet Service group name. Source firewall.internet-service-custom-group.name.
internet_service_src_group
list / elements=string
Internet Service source group name.
name
string / required
Internet Service group name. Source firewall.internet-service-group.name.
internet_service_src_id
list / elements=string
Internet Service source ID.
id
integer / required
Internet Service ID. Source firewall.internet-service.id.
internet_service_src_negate
string
    Choices:
  • enable
  • disable
When enabled internet-service-src specifies what the service must NOT be.
ippool
string
    Choices:
  • enable
  • disable
Enable to use IP Pools for source NAT.
ips_sensor
string
Name of an existing IPS sensor. Source ips.sensor.name.
logtraffic
string
    Choices:
  • all
  • utm
  • disable
Enable or disable logging. Log all sessions or security profile sessions.
logtraffic_start
string
    Choices:
  • enable
  • disable
Record logs when a session starts.
mms_profile
string
Name of an existing MMS profile. Source firewall.mms-profile.name.
name
string
Policy name.
nat
string
    Choices:
  • enable
  • disable
Enable/disable source NAT.
outbound
string
    Choices:
  • enable
  • disable
Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.
per_ip_shaper
string
Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.
policyid
integer / required
Policy ID (0 - 4294967294).
poolname4
list / elements=string
IPv4 pool names.
name
string / required
IPv4 pool name. Source firewall.ippool.name.
poolname6
list / elements=string
IPv6 pool names.
name
string / required
IPv6 pool name. Source firewall.ippool6.name.
profile_group
string
Name of profile group. Source firewall.profile-group.name.
profile_protocol_options
string
Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.
profile_type
string
    Choices:
  • single
  • group
Determine whether the firewall policy allows security profile groups or single profiles only.
schedule
string
Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
service
list / elements=string
Service and service group names.
name
string / required
Service name. Source firewall.service.custom.name firewall.service.group.name.
service_negate
string
    Choices:
  • enable
  • disable
When enabled service specifies what the service must NOT be.
session_ttl
integer
TTL in seconds for sessions accepted by this policy (0 means use the system ).
srcaddr4
list / elements=string
Source IPv4 address name and address group names.
name
string / required
Address name. Source firewall.address.name firewall.addrgrp.name system.external-resource.name.
srcaddr6
list / elements=string
Source IPv6 address name and address group names.
name
string / required
Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.
srcaddr_negate
string
    Choices:
  • enable
  • disable
When enabled srcaddr specifies what the source address must NOT be.
srcintf
list / elements=string
Incoming (ingress) interface.
name
string / required
Interface name. Source system.interface.name system.zone.name.
ssh_filter_profile
string
Name of an existing SSH filter profile. Source ssh-filter.profile.name.
ssh_policy_redirect
string
    Choices:
  • enable
  • disable
Redirect SSH traffic to matching transparent proxy policy.
ssl_ssh_profile
string
Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.
status
string
    Choices:
  • enable
  • disable
Enable or disable this policy.
tcp_mss_receiver
integer
Receiver TCP maximum segment size (MSS).
tcp_mss_sender
integer
Sender TCP maximum segment size (MSS).
traffic_shaper
string
Traffic shaper. Source firewall.shaper.traffic-shaper.name.
traffic_shaper_reverse
string
Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.
users
list / elements=string
Names of individual users that can authenticate with this policy.
name
string / required
User name. Source user.local.name.
utm_status
string
    Choices:
  • enable
  • disable
Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.
uuid
string
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
voip_profile
string
Name of an existing VoIP profile. Source voip.profile.name.
vpntunnel
string
Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name.
waf_profile
string
Name of an existing Web application firewall profile. Source waf.profile.name.
wanopt
string
    Choices:
  • enable
  • disable
Enable/disable WAN optimization.
wanopt_detection
string
    Choices:
  • active
  • passive
  • False
WAN optimization auto-detection mode.
wanopt_passive_opt
string
    Choices:
  • default
  • transparent
  • non-transparent
WAN optimization passive mode options. This option decides what IP address will be used to connect to server.
wanopt_peer
string
WAN optimization peer. Source wanopt.peer.peer-host-id.
wanopt_profile
string
WAN optimization profile. Source wanopt.profile.name.
webcache
string
    Choices:
  • enable
  • disable
Enable/disable web cache.
webcache_https
string
    Choices:
  • disable
  • enable
Enable/disable web cache for HTTPS.
webfilter_profile
string
Name of an existing Web filter profile. Source webfilter.profile.name.
webproxy_forward_server
string
Webproxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.
webproxy_profile
string
Webproxy profile name. Source web-proxy.profile.name.
state
string / required
    Choices:
  • present
  • absent
Indicates whether to create or remove the object.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure consolidated IPv4/IPv6 policies.
    fortios_firewall_consolidated_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_consolidated_policy:
        action: "accept"
        application_list: "<your_own_value> (source application.list.name)"
        auto_asic_offload: "enable"
        av_profile: "<your_own_value> (source antivirus.profile.name)"
        captive_portal_exempt: "enable"
        cifs_profile: "<your_own_value> (source cifs.profile.name)"
        comments: "<your_own_value>"
        diffserv_forward: "enable"
        diffserv_reverse: "enable"
        diffservcode_forward: "<your_own_value>"
        diffservcode_rev: "<your_own_value>"
        dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
        dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)"
        dstaddr_negate: "enable"
        dstaddr4:
         -
            name: "default_name_18 (source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource.name)"
        dstaddr6:
         -
            name: "default_name_20 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system.external-resource
              .name)"
        dstintf:
         -
            name: "default_name_22 (source system.interface.name system.zone.name)"
        emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
        fixedport: "enable"
        fsso_groups:
         -
            name: "default_name_26 (source user.adgrp.name)"
        global_label: "<your_own_value>"
        groups:
         -
            name: "default_name_29 (source user.group.name)"
        http_policy_redirect: "enable"
        icap_profile: "<your_own_value> (source icap.profile.name)"
        inbound: "enable"
        inspection_mode: "proxy"
        internet_service: "enable"
        internet_service_custom:
         -
            name: "default_name_36 (source firewall.internet-service-custom.name)"
        internet_service_custom_group:
         -
            name: "default_name_38 (source firewall.internet-service-custom-group.name)"
        internet_service_group:
         -
            name: "default_name_40 (source firewall.internet-service-group.name)"
        internet_service_id:
         -
            id:  "42 (source firewall.internet-service.id)"
        internet_service_negate: "enable"
        internet_service_src: "enable"
        internet_service_src_custom:
         -
            name: "default_name_46 (source firewall.internet-service-custom.name)"
        internet_service_src_custom_group:
         -
            name: "default_name_48 (source firewall.internet-service-custom-group.name)"
        internet_service_src_group:
         -
            name: "default_name_50 (source firewall.internet-service-group.name)"
        internet_service_src_id:
         -
            id:  "52 (source firewall.internet-service.id)"
        internet_service_src_negate: "enable"
        ippool: "enable"
        ips_sensor: "<your_own_value> (source ips.sensor.name)"
        logtraffic: "all"
        logtraffic_start: "enable"
        mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
        name: "default_name_59"
        nat: "enable"
        outbound: "enable"
        per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
        policyid: "63"
        poolname4:
         -
            name: "default_name_65 (source firewall.ippool.name)"
        poolname6:
         -
            name: "default_name_67 (source firewall.ippool6.name)"
        profile_group: "<your_own_value> (source firewall.profile-group.name)"
        profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
        profile_type: "single"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_73 (source firewall.service.custom.name firewall.service.group.name)"
        service_negate: "enable"
        session_ttl: "75"
        srcaddr_negate: "enable"
        srcaddr4:
         -
            name: "default_name_78 (source firewall.address.name firewall.addrgrp.name system.external-resource.name)"
        srcaddr6:
         -
            name: "default_name_80 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        srcintf:
         -
            name: "default_name_82 (source system.interface.name system.zone.name)"
        ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
        ssh_policy_redirect: "enable"
        ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        tcp_mss_receiver: "87"
        tcp_mss_sender: "88"
        traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        users:
         -
            name: "default_name_92 (source user.local.name)"
        utm_status: "enable"
        uuid: "<your_own_value>"
        voip_profile: "<your_own_value> (source voip.profile.name)"
        vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
        waf_profile: "<your_own_value> (source waf.profile.name)"
        wanopt: "enable"
        wanopt_detection: "active"
        wanopt_passive_opt: "default"
        wanopt_peer: "<your_own_value> (source wanopt.peer.peer-host-id)"
        wanopt_profile: "<your_own_value> (source wanopt.profile.name)"
        webcache: "enable"
        webcache_https: "disable"
        webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
        webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
        webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_consolidated_policy_module.html