W3cubDocs

/Ansible

fortinet.fortios.fortios_firewall_policy64 – Configure IPv6 to IPv4 policies in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy64.

New in version 2.10: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy64 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
enable_log
boolean
    Choices:
  • no
  • yes
Enable/Disable logging for task.
firewall_policy64
dictionary
Configure IPv6 to IPv4 policies.
action
string
    Choices:
  • accept
  • deny
Policy action.
comments
string
Comment.
dstaddr
list / elements=string
Destination address name.
name
string / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip64.name firewall.vipgrp64.name.
dstintf
string
Destination interface name. Source system.interface.name system.zone.name.
fixedport
string
    Choices:
  • enable
  • disable
Enable/disable policy fixed port.
ippool
string
    Choices:
  • enable
  • disable
Enable/disable policy64 IP pool.
logtraffic
string
    Choices:
  • enable
  • disable
Enable/disable policy log traffic.
logtraffic_start
string
    Choices:
  • enable
  • disable
Record logs when a session starts and ends.
name
string
Policy name.
per_ip_shaper
string
Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.
permit_any_host
string
    Choices:
  • enable
  • disable
Enable/disable permit any host in.
policyid
integer / required
Policy ID.
poolname
list / elements=string
Policy IP pool names.
name
string / required
IP pool name. Source firewall.ippool.name.
schedule
string
Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
service
list / elements=string
Service name.
name
string / required
Address name. Source firewall.service.custom.name firewall.service.group.name.
srcaddr
list / elements=string
Source address name.
name
string / required
Address name. Source firewall.address6.name firewall.addrgrp6.name.
srcintf
string
Source interface name. Source system.zone.name system.interface.name.
status
string
    Choices:
  • enable
  • disable
Enable/disable policy status.
tcp_mss_receiver
integer
TCP MSS value of receiver.
tcp_mss_sender
integer
TCP MSS value of sender.
traffic_shaper
string
Traffic shaper. Source firewall.shaper.traffic-shaper.name.
traffic_shaper_reverse
string
Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.
uuid
string
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
state
string / required
    Choices:
  • present
  • absent
Indicates whether to create or remove the object.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv6 to IPv4 policies.
    fortios_firewall_policy64:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_policy64:
        action: "accept"
        comments: "<your_own_value>"
        dstaddr:
         -
            name: "default_name_6 (source firewall.address.name firewall.addrgrp.name firewall.vip64.name firewall.vipgrp64.name)"
        dstintf: "<your_own_value> (source system.interface.name system.zone.name)"
        fixedport: "enable"
        ippool: "enable"
        logtraffic: "enable"
        logtraffic_start: "enable"
        name: "default_name_12"
        per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
        permit_any_host: "enable"
        policyid: "15"
        poolname:
         -
            name: "default_name_17 (source firewall.ippool.name)"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_20 (source firewall.service.custom.name firewall.service.group.name)"
        srcaddr:
         -
            name: "default_name_22 (source firewall.address6.name firewall.addrgrp6.name)"
        srcintf: "<your_own_value> (source system.zone.name system.interface.name)"
        status: "enable"
        tcp_mss_receiver: "25"
        tcp_mss_sender: "26"
        traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        uuid: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_policy64_module.html