Note
This plugin is part of the fortinet.fortios collection (version 2.1.2).
You might already have this collection installed if you are using the ansible
package. It is not included in ansible-core
. To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy
.
New in version 2.10: of fortinet.fortios
The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
access_token string | Token-based authentication. Generated from GUI of Fortigate. | |||
action string |
| the action indiactor to move an object in the list | ||
after string | mkey of target identifier | |||
before string | mkey of target identifier | |||
enable_log boolean |
| Enable/Disable logging for task. | ||
firewall_policy dictionary | Configure IPv4 policies. | |||
action string |
| Policy action (allow/deny/ipsec). | ||
anti_replay string |
| Enable/disable anti-replay check. | ||
app_category list / elements=string | Application category ID list. | |||
id integer / required | Category IDs. | |||
app_group list / elements=string | Application group names. | |||
name string / required | Application group names. Source application.group.name. | |||
application list / elements=string | Application ID list. | |||
id integer / required | Application IDs. | |||
application_list string | Name of an existing Application list. Source application.list.name. | |||
auth_cert string | HTTPS server certificate for policy authentication. Source vpn.certificate.local.name. | |||
auth_path string |
| Enable/disable authentication-based routing. | ||
auth_redirect_addr string | HTTP-to-HTTPS redirect address for firewall authentication. | |||
auto_asic_offload string |
| Enable/disable offloading security profile processing to CP processors. | ||
av_profile string | Name of an existing Antivirus profile. Source antivirus.profile.name. | |||
block_notification string |
| Enable/disable block notification. | ||
captive_portal_exempt string |
| Enable to exempt some users from the captive portal. | ||
capture_packet string |
| Enable/disable capture packets. | ||
cifs_profile string | Name of an existing CIFS profile. Source cifs.profile.name. | |||
comments string | Comment. | |||
custom_log_fields list / elements=string | Custom fields to append to log messages for this policy. | |||
field_id string | Custom log field. Source log.custom-field.id. | |||
decrypted_traffic_mirror string | Decrypted traffic mirror. Source firewall.decrypted-traffic-mirror.name. | |||
delay_tcp_npu_session string |
| Enable TCP NPU session delay to guarantee packet order of 3-way handshake. | ||
devices list / elements=string | Names of devices or device groups that can be matched by the policy. | |||
name string / required | Device or group name. Source user.device.alias user.device-group.name user.device-category.name. | |||
diffserv_forward string |
| Enable to change packet"s DiffServ values to the specified diffservcode-forward value. | ||
diffserv_reverse string |
| Enable to change packet"s reverse (reply) DiffServ values to the specified diffservcode-rev value. | ||
diffservcode_forward string | Change packet"s DiffServ to this value. | |||
diffservcode_rev string | Change packet"s reverse (reply) DiffServ to this value. | |||
disclaimer string |
| Enable/disable user authentication disclaimer. | ||
dlp_sensor string | Name of an existing DLP sensor. Source dlp.sensor.name. | |||
dnsfilter_profile string | Name of an existing DNS filter profile. Source dnsfilter.profile.name. | |||
dscp_match string |
| Enable DSCP check. | ||
dscp_negate string |
| Enable negated DSCP match. | ||
dscp_value string | DSCP value. | |||
dsri string |
| Enable DSRI to ignore HTTP server responses. | ||
dstaddr list / elements=string | Destination address and address group names. | |||
name string / required | Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name. | |||
dstaddr6 list / elements=string | Destination IPv6 address name and address group names. | |||
name string / required | Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vipgrp6.name firewall.vip6.name system .external-resource.name. | |||
dstaddr_negate string |
| When enabled dstaddr specifies what the destination address must NOT be. | ||
dstintf list / elements=string | Outgoing (egress) interface. | |||
name string / required | Interface name. Source system.interface.name system.zone.name. | |||
dynamic_shaping string |
| Enable/disable dynamic RADIUS defined traffic shaping. | ||
email_collect string |
| Enable/disable email collection. | ||
emailfilter_profile string | Name of an existing email filter profile. Source emailfilter.profile.name. | |||
file_filter_profile string | Name of an existing file-filter profile. Source file-filter.profile.name. | |||
firewall_session_dirty string |
| How to handle sessions if the configuration of this firewall policy changes. | ||
fixedport string |
| Enable to prevent source NAT from changing a session"s source port. | ||
fsso string |
| Enable/disable Fortinet Single Sign-On. | ||
fsso_agent_for_ntlm string | FSSO agent to use for NTLM authentication. Source user.fsso.name. | |||
fsso_groups list / elements=string | Names of FSSO groups. | |||
name string / required | Names of FSSO groups. Source user.adgrp.name. | |||
geoip_anycast string |
| Enable/disable recognition of anycast IP addresses using the geography IP database. | ||
geoip_match string |
| Match geography address based either on its physical location or registered location. | ||
global_label string | Label for the policy that appears when the GUI is in Global View mode. | |||
groups list / elements=string | Names of user groups that can authenticate with this policy. | |||
name string / required | Group name. Source user.group.name. | |||
gtp_profile string | GTP profile. Source firewall.gtp.name. | |||
http_policy_redirect string |
| Redirect HTTP(S) traffic to matching transparent web proxy policy. | ||
icap_profile string | Name of an existing ICAP profile. Source icap.profile.name. | |||
identity_based_route string | Name of identity-based routing rule. Source firewall.identity-based-route.name. | |||
inbound string |
| Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN. | ||
inspection_mode string |
| Policy inspection mode (Flow/proxy). Default is Flow mode. | ||
internet_service string |
| Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used. | ||
internet_service_custom list / elements=string | Custom Internet Service name. | |||
name string / required | Custom Internet Service name. Source firewall.internet-service-custom.name. | |||
internet_service_custom_group list / elements=string | Custom Internet Service group name. | |||
name string / required | Custom Internet Service group name. Source firewall.internet-service-custom-group.name. | |||
internet_service_group list / elements=string | Internet Service group name. | |||
name string / required | Internet Service group name. Source firewall.internet-service-group.name. | |||
internet_service_id list / elements=string | Internet Service ID. | |||
id integer / required | Internet Service ID. Source firewall.internet-service.id. | |||
internet_service_name list / elements=string | Internet Service name. | |||
name string / required | Internet Service name. Source firewall.internet-service-name.name. | |||
internet_service_negate string |
| When enabled internet-service specifies what the service must NOT be. | ||
internet_service_src string |
| Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used. | ||
internet_service_src_custom list / elements=string | Custom Internet Service source name. | |||
name string / required | Custom Internet Service name. Source firewall.internet-service-custom.name. | |||
internet_service_src_custom_group list / elements=string | Custom Internet Service source group name. | |||
name string / required | Custom Internet Service group name. Source firewall.internet-service-custom-group.name. | |||
internet_service_src_group list / elements=string | Internet Service source group name. | |||
name string / required | Internet Service group name. Source firewall.internet-service-group.name. | |||
internet_service_src_id list / elements=string | Internet Service source ID. | |||
id integer / required | Internet Service ID. Source firewall.internet-service.id. | |||
internet_service_src_name list / elements=string | Internet Service source name. | |||
name string / required | Internet Service name. Source firewall.internet-service-name.name. | |||
internet_service_src_negate string |
| When enabled internet-service-src specifies what the service must NOT be. | ||
ippool string |
| Enable to use IP Pools for source NAT. | ||
ips_sensor string | Name of an existing IPS sensor. Source ips.sensor.name. | |||
label string | Label for the policy that appears when the GUI is in Section View mode. | |||
learning_mode string |
| Enable to allow everything, but log all of the meaningful data for security information gathering. A learning report will be generated. | ||
logtraffic string |
| Enable or disable logging. Log all sessions or security profile sessions. | ||
logtraffic_start string |
| Record logs when a session starts and ends. | ||
match_vip string |
| Enable to match packets that have had their destination addresses changed by a VIP. | ||
match_vip_only string |
| Enable/disable matching of only those packets that have had their destination addresses changed by a VIP. | ||
mms_profile string | Name of an existing MMS profile. Source firewall.mms-profile.name. | |||
name string | Policy name. | |||
nat string |
| Enable/disable source NAT. | ||
natinbound string |
| Policy-based IPsec VPN: apply destination NAT to inbound traffic. | ||
natip string | Policy-based IPsec VPN: source NAT IP address for outgoing traffic. | |||
natoutbound string |
| Policy-based IPsec VPN: apply source NAT to outbound traffic. | ||
np_acceleration string |
| Enable/disable UTM Network Processor acceleration. | ||
ntlm string |
| Enable/disable NTLM authentication. | ||
ntlm_enabled_browsers list / elements=string | HTTP-User-Agent value of supported browsers. | |||
user_agent_string string | User agent string. | |||
ntlm_guest string |
| Enable/disable NTLM guest user access. | ||
outbound string |
| Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN. | ||
passive_wan_health_measurement string |
| Enable/disable passive WAN health measurement. When enabled, auto-asic-offload is disabled. | ||
per_ip_shaper string | Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name. | |||
permit_any_host string |
| Accept UDP packets from any host. | ||
permit_stun_host string |
| Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host. | ||
policyid integer / required | Policy ID. | |||
poolname list / elements=string | IP Pool names. | |||
name string / required | IP pool name. Source firewall.ippool.name. | |||
poolname6 list / elements=string | IPv6 pool names. | |||
name string / required | IPv6 pool name. Source firewall.ippool6.name. | |||
profile_group string | Name of profile group. Source firewall.profile-group.name. | |||
profile_protocol_options string | Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name. | |||
profile_type string |
| Determine whether the firewall policy allows security profile groups or single profiles only. | ||
radius_mac_auth_bypass string |
| Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server. | ||
redirect_url string | URL users are directed to after seeing and accepting the disclaimer or authenticating. | |||
replacemsg_override_group string | Override the default replacement message group for this policy. Source system.replacemsg-group.name. | |||
reputation_direction string |
| Direction of the initial traffic for reputation to take effect. | ||
reputation_minimum integer | Minimum Reputation to take action. Source firewall.internet-service-reputation.id. | |||
rsso string |
| Enable/disable RADIUS single sign-on (RSSO). | ||
rtp_addr list / elements=string | Address names if this is an RTP NAT policy. | |||
name string / required | Address name. Source firewall.address.name firewall.addrgrp.name. | |||
rtp_nat string |
| Enable Real Time Protocol (RTP) NAT. | ||
scan_botnet_connections string |
| Block or monitor connections to Botnet servers or disable Botnet scanning. | ||
schedule string | Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name. | |||
schedule_timeout string |
| Enable to force current sessions to end when the schedule object times out. Disable allows them to end from inactivity. | ||
send_deny_packet string |
| Enable to send a reply when a session is denied or blocked by a firewall policy. | ||
service list / elements=string | Service and service group names. | |||
name string / required | Service and service group names. Source firewall.service.custom.name firewall.service.group.name. | |||
service_negate string |
| When enabled service specifies what the service must NOT be. | ||
session_ttl integer | TTL in seconds for sessions accepted by this policy (0 means use the system ). | |||
spamfilter_profile string | Name of an existing Spam filter profile. Source spamfilter.profile.name. | |||
src_vendor_mac list / elements=string | Vendor MAC source ID. | |||
id integer / required | Vendor MAC ID. Source firewall.vendor-mac.id. | |||
srcaddr list / elements=string | Source address and address group names. | |||
name string / required | Address name. Source firewall.address.name firewall.addrgrp.name. | |||
srcaddr6 list / elements=string | Source IPv6 address name and address group names. | |||
name string / required | Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name. | |||
srcaddr_negate string |
| When enabled srcaddr specifies what the source address must NOT be. | ||
srcintf list / elements=string | Incoming (ingress) interface. | |||
name string / required | Interface name. Source system.interface.name system.zone.name. | |||
ssh_filter_profile string | Name of an existing SSH filter profile. Source ssh-filter.profile.name. | |||
ssh_policy_redirect string |
| Redirect SSH traffic to matching transparent proxy policy. | ||
ssl_mirror string |
| Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring). | ||
ssl_mirror_intf list / elements=string | SSL mirror interface name. | |||
name string / required | Mirror Interface name. Source system.interface.name system.zone.name. | |||
ssl_ssh_profile string | Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name. | |||
status string |
| Enable or disable this policy. | ||
tcp_mss_receiver integer | Receiver TCP maximum segment size (MSS). | |||
tcp_mss_sender integer | Sender TCP maximum segment size (MSS). | |||
tcp_session_without_syn string |
| Enable/disable creation of TCP session without SYN flag. | ||
timeout_send_rst string |
| Enable/disable sending RST packets when TCP sessions expire. | ||
tos string | ToS (Type of Service) value used for comparison. | |||
tos_mask string | Non-zero bit positions are used for comparison while zero bit positions are ignored. | |||
tos_negate string |
| Enable negated TOS match. | ||
traffic_shaper string | Traffic shaper. Source firewall.shaper.traffic-shaper.name. | |||
traffic_shaper_reverse string | Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name. | |||
url_category list / elements=string | URL category ID list. | |||
id integer / required | URL category ID. | |||
users list / elements=string | Names of individual users that can authenticate with this policy. | |||
name string / required | Names of individual users that can authenticate with this policy. Source user.local.name. | |||
utm_status string |
| Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy. | ||
uuid string | Universally Unique Identifier (UUID; automatically assigned but can be manually reset). | |||
videofilter_profile string | Name of an existing VideoFilter profile. Source videofilter.profile.name. | |||
vlan_cos_fwd integer | VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest. | |||
vlan_cos_rev integer | VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest.. | |||
vlan_filter string | Set VLAN filters. | |||
voip_profile string | Name of an existing VoIP profile. Source voip.profile.name. | |||
vpntunnel string | Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name. | |||
waf_profile string | Name of an existing Web application firewall profile. Source waf.profile.name. | |||
wanopt string |
| Enable/disable WAN optimization. | ||
wanopt_detection string |
| WAN optimization auto-detection mode. | ||
wanopt_passive_opt string |
| WAN optimization passive mode options. This option decides what IP address will be used to connect server. | ||
wanopt_peer string | WAN optimization peer. Source wanopt.peer.peer-host-id. | |||
wanopt_profile string | WAN optimization profile. Source wanopt.profile.name. | |||
wccp string |
| Enable/disable forwarding traffic matching this policy to a configured WCCP server. | ||
webcache string |
| Enable/disable web cache. | ||
webcache_https string |
| Enable/disable web cache for HTTPS. | ||
webfilter_profile string | Name of an existing Web filter profile. Source webfilter.profile.name. | |||
webproxy_forward_server string | Webproxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name. | |||
webproxy_profile string | Webproxy profile name. Source web-proxy.profile.name. | |||
wsso string |
| Enable/disable WiFi Single Sign On (WSSO). | ||
ztna_ems_tag list / elements=string | Source ztna-ems-tag names. | |||
name string / required | Address name. Source firewall.address.name firewall.addrgrp.name. | |||
ztna_geo_tag list / elements=string | Source ztna-geo-tag names. | |||
name string / required | Address name. Source firewall.address.name firewall.addrgrp.name. | |||
ztna_status string |
| Enable/disable zero trust access. | ||
self string | mkey of self identifier | |||
state string / required |
| Indicates whether to create or remove the object. | ||
vdom string | Default: "root" | Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. |
Note
- hosts: fortigates collections: - fortinet.fortios connection: httpapi vars: vdom: "root" ansible_httpapi_use_ssl: yes ansible_httpapi_validate_certs: no ansible_httpapi_port: 443 tasks: - name: Configure IPv4 policies. fortios_firewall_policy: vdom: "{{ vdom }}" state: "present" access_token: "<your_own_value>" firewall_policy: action: "accept" anti_replay: "enable" app_category: - id: "6" app_group: - name: "default_name_8 (source application.group.name)" application: - id: "10" application_list: "<your_own_value> (source application.list.name)" auth_cert: "<your_own_value> (source vpn.certificate.local.name)" auth_path: "enable" auth_redirect_addr: "<your_own_value>" auto_asic_offload: "enable" av_profile: "<your_own_value> (source antivirus.profile.name)" block_notification: "enable" captive_portal_exempt: "enable" capture_packet: "enable" cifs_profile: "<your_own_value> (source cifs.profile.name)" comments: "<your_own_value>" custom_log_fields: - field_id: "<your_own_value> (source log.custom-field.id)" decrypted_traffic_mirror: "<your_own_value> (source firewall.decrypted-traffic-mirror.name)" delay_tcp_npu_session: "enable" devices: - name: "default_name_27 (source user.device.alias user.device-group.name user.device-category.name)" diffserv_forward: "enable" diffserv_reverse: "enable" diffservcode_forward: "<your_own_value>" diffservcode_rev: "<your_own_value>" disclaimer: "enable" dlp_sensor: "<your_own_value> (source dlp.sensor.name)" dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)" dscp_match: "enable" dscp_negate: "enable" dscp_value: "<your_own_value>" dsri: "enable" dstaddr: - name: "default_name_40 (source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name)" dstaddr_negate: "enable" dstaddr6: - name: "default_name_43 (source firewall.address6.name firewall.addrgrp6.name firewall.vipgrp6.name firewall.vip6.name system.external-resource .name)" dstintf: - name: "default_name_45 (source system.interface.name system.zone.name)" dynamic_shaping: "enable" email_collect: "enable" emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)" file_filter_profile: "<your_own_value> (source file-filter.profile.name)" firewall_session_dirty: "check-all" fixedport: "enable" fsso: "enable" fsso_agent_for_ntlm: "<your_own_value> (source user.fsso.name)" fsso_groups: - name: "default_name_55 (source user.adgrp.name)" geoip_anycast: "enable" geoip_match: "physical-location" global_label: "<your_own_value>" groups: - name: "default_name_60 (source user.group.name)" gtp_profile: "<your_own_value> (source firewall.gtp.name)" http_policy_redirect: "enable" icap_profile: "<your_own_value> (source icap.profile.name)" identity_based_route: "<your_own_value> (source firewall.identity-based-route.name)" inbound: "enable" inspection_mode: "proxy" internet_service: "enable" internet_service_custom: - name: "default_name_69 (source firewall.internet-service-custom.name)" internet_service_custom_group: - name: "default_name_71 (source firewall.internet-service-custom-group.name)" internet_service_group: - name: "default_name_73 (source firewall.internet-service-group.name)" internet_service_id: - id: "75 (source firewall.internet-service.id)" internet_service_name: - name: "default_name_77 (source firewall.internet-service-name.name)" internet_service_negate: "enable" internet_service_src: "enable" internet_service_src_custom: - name: "default_name_81 (source firewall.internet-service-custom.name)" internet_service_src_custom_group: - name: "default_name_83 (source firewall.internet-service-custom-group.name)" internet_service_src_group: - name: "default_name_85 (source firewall.internet-service-group.name)" internet_service_src_id: - id: "87 (source firewall.internet-service.id)" internet_service_src_name: - name: "default_name_89 (source firewall.internet-service-name.name)" internet_service_src_negate: "enable" ippool: "enable" ips_sensor: "<your_own_value> (source ips.sensor.name)" label: "<your_own_value>" learning_mode: "enable" logtraffic: "all" logtraffic_start: "enable" match_vip: "enable" match_vip_only: "enable" mms_profile: "<your_own_value> (source firewall.mms-profile.name)" name: "default_name_100" nat: "enable" natinbound: "enable" natip: "<your_own_value>" natoutbound: "enable" np_acceleration: "enable" ntlm: "enable" ntlm_enabled_browsers: - user_agent_string: "<your_own_value>" ntlm_guest: "enable" outbound: "enable" passive_wan_health_measurement: "enable" per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)" permit_any_host: "enable" permit_stun_host: "enable" policyid: "115" poolname: - name: "default_name_117 (source firewall.ippool.name)" poolname6: - name: "default_name_119 (source firewall.ippool6.name)" profile_group: "<your_own_value> (source firewall.profile-group.name)" profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)" profile_type: "single" radius_mac_auth_bypass: "enable" redirect_url: "<your_own_value>" replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)" reputation_direction: "source" reputation_minimum: "127 (source firewall.internet-service-reputation.id)" rsso: "enable" rtp_addr: - name: "default_name_130 (source firewall.address.name firewall.addrgrp.name)" rtp_nat: "disable" scan_botnet_connections: "disable" schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)" schedule_timeout: "enable" send_deny_packet: "disable" service: - name: "default_name_137 (source firewall.service.custom.name firewall.service.group.name)" service_negate: "enable" session_ttl: "139" spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)" src_vendor_mac: - id: "142 (source firewall.vendor-mac.id)" srcaddr: - name: "default_name_144 (source firewall.address.name firewall.addrgrp.name)" srcaddr_negate: "enable" srcaddr6: - name: "default_name_147 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)" srcintf: - name: "default_name_149 (source system.interface.name system.zone.name)" ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)" ssh_policy_redirect: "enable" ssl_mirror: "enable" ssl_mirror_intf: - name: "default_name_154 (source system.interface.name system.zone.name)" ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)" status: "enable" tcp_mss_receiver: "157" tcp_mss_sender: "158" tcp_session_without_syn: "all" timeout_send_rst: "enable" tos: "<your_own_value>" tos_mask: "<your_own_value>" tos_negate: "enable" traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)" traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)" url_category: - id: "167" users: - name: "default_name_169 (source user.local.name)" utm_status: "enable" uuid: "<your_own_value>" videofilter_profile: "<your_own_value> (source videofilter.profile.name)" vlan_cos_fwd: "173" vlan_cos_rev: "174" vlan_filter: "<your_own_value>" voip_profile: "<your_own_value> (source voip.profile.name)" vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)" waf_profile: "<your_own_value> (source waf.profile.name)" wanopt: "enable" wanopt_detection: "active" wanopt_passive_opt: "default" wanopt_peer: "<your_own_value> (source wanopt.peer.peer-host-id)" wanopt_profile: "<your_own_value> (source wanopt.profile.name)" wccp: "enable" webcache: "enable" webcache_https: "disable" webfilter_profile: "<your_own_value> (source webfilter.profile.name)" webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)" webproxy_profile: "<your_own_value> (source web-proxy.profile.name)" wsso: "enable" ztna_ems_tag: - name: "default_name_192 (source firewall.address.name firewall.addrgrp.name)" ztna_geo_tag: - name: "default_name_194 (source firewall.address.name firewall.addrgrp.name)" ztna_status: "enable" - name: move firewall.policy fortios_firewall_policy: vdom: "root" action: "move" self: "<mkey of self identifier>" after: "<mkey of target identifier>" #before: "<mkey of target identifier>"
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build string | always | Build number of the fortigate image Sample: 1547 |
http_method string | always | Last method used to provision the content into FortiGate Sample: PUT |
http_status string | always | Last result given by FortiGate on last operation applied Sample: 200 |
mkey string | success | Master key (id) used in the last call to FortiGate Sample: id |
name string | always | Name of the table used to fulfill the request Sample: urlfilter |
path string | always | Path of the table used to fulfill the request Sample: webfilter |
revision string | always | Internal revision number Sample: 17.0.2.10658 |
serial string | always | Serial number of the unit Sample: FGVMEVYYQT3AB5352 |
status string | always | Indication of the operation's result Sample: success |
vdom string | always | Virtual domain used Sample: root |
version string | always | Version of the FortiGate Sample: v5.6.3 |
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_policy_module.html