W3cubDocs

/Ansible

hpe.nimble.hpe_nimble_array – Manage the HPE Nimble Storage array

Note

This plugin is part of the hpe.nimble collection (version 1.1.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install hpe.nimble.

To use it in a playbook, specify: hpe.nimble.hpe_nimble_array.

New in version 1.0.0: of hpe.nimble

Synopsis

  • Manage the array on an HPE Nimble Storage group.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9 or later
  • Python 3.6 or later
  • HPE Nimble Storage SDK for Python
  • HPE Nimble Storage arrays running NimbleOS 5.0 or later

Parameters

Parameter Choices/Defaults Comments
allow_lower_limits
boolean
    Choices:
  • no
  • yes
A True setting will allow you to add an array with lower limits to a pool with higher limits.
change_name
string
Change the name of the existing array.
create_pool
boolean
    Choices:
  • no
  • yes
Whether to create an associated pool during the array creation.
ctrlr_a_support_ip
string
Controller A Support IP Address. Four numbers in the range (0,255) separated by periods.
ctrlr_b_support_ip
string
Controller B Support IP Address. Four numbers in the range (0,255) separated by periods.
failover
boolean
    Choices:
  • no
  • yes
Perform a failover on the specified array.
force
boolean
    Choices:
  • no
  • yes
Forcibly delete the specified array.
halt
boolean
    Choices:
  • no
  • yes
Halt the specified array. Restarting the array will require physically powering it back on.
host
string / required
HPE Nimble Storage IP address.
name
string / required
The user-provided name of the array. It is also the array's hostname.
nic_list
list / elements=dictionary
List NICs information. Used when creating an array.
password
string / required
HPE Nimble Storage password.
pool_description
string
Text description of the pool to be created during array creation.
pool_name
string
Name of pool to which this is a member.
reboot
boolean
    Choices:
  • no
  • yes
Reboot the specified array.
secondary_mgmt_ip
string
Secondary management IP address for the group.
serial
string
Serial number of the array.
state
string / required
    Choices:
  • create
  • present
  • absent
The array operation
username
string / required
HPE Nimble Storage user name.

Notes

Note

  • This module does not support check_mode.

Examples

# if state is create , then create a array if not present. Fails if already present.
# if state is present, then create a array if not present. Succeed if it already exists.
- name: Create array if not present
  hpe.nimble.hpe_nimble_array:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    state: "{{ state | default('present') }}"
    name: "{{ name }}"
    ctrlr_b_support_ip: "{{ ctrlr_b_support_ip | mandatory}}"
    ctrlr_a_support_ip: "{{ ctrlr_a_support_ip | mandatory}}"
    serial: "{{ serial | mandatory}}"
    nic_list: "{{ nic_list | mandatory}}"
    pool_name: "{{ pool_name | mandatory}}"

- name: Delete array
  hpe.nimble.hpe_nimble_array:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    vol_name: "{{ansible_default_ipv4['address']}}-{{ vol_name }}"
    name: "{{ name }}"
    state: absent

- name: Failover array
  hpe.nimble.hpe_nimble_array:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    name: "{{ name }}"
    failover: true
    state: present

- name: Halt array
  hpe.nimble.hpe_nimble_array:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    name: "{{ name }}"
    state: present
    halt: true

- name: Reboot array
  hpe.nimble.hpe_nimble_array:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    name: "{{ name }}"
    state: present
    reboot: true

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/hpe/nimble/hpe_nimble_array_module.html