W3cubDocs

/Ansible

mellanox.onyx.onyx_linkagg – Manage link aggregation groups on Mellanox ONYX network devices

Note

This plugin is part of the mellanox.onyx collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_linkagg.

Synopsis

  • This module provides declarative management of link aggregation groups on Mellanox ONYX network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
string
List of link aggregation definitions.
members
string / required
List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
mode
string
    Choices:
  • on
  • active
  • passive
Default:
"yes"
Mode of the link aggregation group. A value of on will enable LACP. active configures the link to actively information about the state of the link, or it can be configured in passive mode ie. send link state information only when received them from another link.
name
string / required
Name of the link aggregation group.
purge
boolean
    Choices:
  • no
  • yes
Purge link aggregation groups not defined in the aggregate parameter.
state
string
    Choices:
  • present
  • absent
  • up
  • down
State of the link aggregation group.

Examples

- name: Configure link aggregation group
  onyx_linkagg:
    name: Po1
    members:
      - Eth1/1
      - Eth1/2

- name: Remove configuration
  onyx_linkagg:
    name: Po1
    state: absent

- name: Create aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
        - { name: Po1, members: [Eth1/1] }
        - { name: Po2, members: [Eth1/2] }

- name: Remove aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
      - name: Po1
      - name: Po2
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always.
The list of configuration mode commands to send to the device

Sample:
['interface port-channel 1', 'exit', 'interface ethernet 1/1 channel-group 1 mode on', 'interface ethernet 1/2 channel-group 1 mode on']


Authors

  • Samer Deeb (@samerd)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/mellanox/onyx/onyx_linkagg_module.html