W3cubDocs

/Ansible

mellanox.onyx.onyx_snmp – Manages SNMP general configurations on Mellanox ONYX network devices

Note

This plugin is part of the mellanox.onyx collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_snmp.

New in version 0.2.0: of mellanox.onyx

Synopsis

  • This module provides declarative management of SNMP on Mellanox ONYX network devices.

Parameters

Parameter Choices/Defaults Comments
communities_enabled
boolean
    Choices:
  • no
  • yes
Enables/Disables community-based authentication on the system.
contact_name
string
Sets the SNMP contact name.
engine_id_reset
boolean
    Choices:
  • no
  • yes
Sets SNMPv3 engineID to node unique value.
location
string
Sets the SNMP location.
multi_communities_enabled
boolean
    Choices:
  • no
  • yes
Enables/Disables multiple communities to be configured.
notify_community
string
Sets the default community for SNMP v1 and v2c notifications sent to hosts which do not have a community override set.
notify_enabled
boolean
    Choices:
  • no
  • yes
Enables/Disables sending of SNMP notifications (traps and informs) from thee system.
notify_event
string
    Choices:
  • asic-chip-down
  • dcbx-pfc-port-oper-state-trap
  • insufficient-power
  • mstp-new-bridge-root
  • ospf-lsdb-approaching-overflow
  • sm-stop
  • user-logout
  • cli-line-executed
  • dcbx-pfc-port-peer-state-trap
  • interface-down
  • mstp-new-root-port
  • ospf-lsdb-overflow
  • snmp-authtrap
  • xstp-new-root-bridge
  • cpu-util-high
  • disk-io-high
  • interface-up
  • mstp-topology-change
  • ospf-nbr-state-change
  • temperature-too-high
  • xstp-root-port-change
  • dcbx-ets-module-state-change
  • disk-space-low
  • internal-bus-error
  • netusage-high
  • paging-high
  • topology_change
  • xstp-topology-change
  • dcbx-ets-port-admin-state-trap
  • entity-state-change
  • internal-link-speed-mismatch
  • new_root
  • power-redundancy-mismatch
  • unexpected-cluster-join
  • dcbx-ets-port-oper-state-trap
  • expected-shutdown
  • liveness-failure
  • ospf-auth-fail
  • process-crash
  • unexpected-cluster-leave
  • dcbx-ets-port-peer-state-trap
  • health-module-status
  • low-power
  • ospf-config-error
  • process-exit
  • unexpected-cluster-size
  • dcbx-pfc-module-state-change
  • insufficient-fans
  • low-power-recover
  • ospf-if-rx-bad-packet
  • sm-restart
  • unexpected-shutdown
  • dcbx-pfc-port-admin-state-trap
  • insufficient-fans-recover
  • memusage-high
  • ospf-if-state-change
  • sm-start
  • user-login
Specifys which events will be sent as SNMP notifications.
notify_port
string
Sets the default port to which notifications are sent.
notify_send_test
string
    Choices:
  • yes
  • no
Sends a test notification.
snmp_communities
list / elements=string
List of snmp communities
community_name
string / required
Configures snmp community name.
community_type
string
    Choices:
  • read-only
  • read-write
Add this community as either a read-only or read-write community.
state
string
    Choices:
  • present
  • absent
Used to decide if you want to delete the given snmp community or not
snmp_permissions
list / elements=string
Allow SNMPSET requests for items in a MIB.
permission_type
string
    Choices:
  • MELLANOX-CONFIG-DB-MIB
  • MELLANOX-EFM-MIB
  • MELLANOX-POWER-CYCLE
  • MELLANOX-SW-UPDATE
  • RFC1213-MIB
Configures the request type.
state_enabled
boolean / required
    Choices:
  • no
  • yes
Enables/Disables the request.
state_enabled
boolean
    Choices:
  • no
  • yes
Enables/Disables the state of the SNMP configuration.

Examples

- name: Configure SNMP
  onyx_snmp:
    state_enabled: yes
    contact_name: sara
    location: Nablus
    communities_enabled: no
    multi_communities_enabled: no
    notify_enabled: yes
    notify_port: 1
    notify_community: community_1
    notify_send_test: yes
    notify_event: temperature-too-high
    snmp_communities:
        - community_name: public
          community_type: read-only
          state: absent
    snmp_permissions:
        - state_enabled: yes
          permission_type: MELLANOX-CONFIG-DB-MIB

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always.
The list of configuration mode commands to send to the device

Sample:
['snmp-server enable', 'no snmp-server enable', 'snmp-server location <location_name>', 'snmp-server contact <contact_name>', 'snmp-server enable communities', 'no snmp-server enable communities', 'snmp-server enable mult-communities', 'no snmp-server enable mult-communities', 'snmp-server enable notify', 'snmp-server notify port <port_number>', 'snmp-server notify community <community_name>', 'snmp-server notify send-test', 'snmp-server notify event <event_name>', 'snmp-server enable set-permission <permission_type>', 'no snmp-server enable set-permission <permission_type>', 'snmp-server community <community_name> <community_type>', 'no snmp-server community <community_name>.', 'snmp-server engineID reset.']


Authors

  • Sara-Touqan (@sarato)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/mellanox/onyx/onyx_snmp_module.html