W3cubDocs

/Ansible

netapp.ontap.na_ontap_snapmirror – NetApp ONTAP or ElementSW Manage SnapMirror

Note

This plugin is part of the netapp.ontap collection (version 21.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_snapmirror.

New in version 2.7.0: of netapp.ontap

Synopsis

  • Create/Delete/Update/Initialize/Break/Resync/Resume SnapMirror volume/vserver relationships for ONTAP/ONTAP
  • This includes SVM replication, aka vserver DR
  • Create/Delete/Update/Initialize SnapMirror volume relationship between ElementSW and ONTAP
  • Modify schedule for a SnapMirror relationship for ONTAP/ONTAP and ElementSW/ONTAP
  • Pre-requisite for ElementSW to ONTAP relationship or vice-versa is an established SnapMirror endpoint for ONTAP cluster with ElementSW UI
  • Pre-requisite for ElementSW to ONTAP relationship or vice-versa is to have SnapMirror enabled in the ElementSW volume
  • For creating a SnapMirror ElementSW/ONTAP relationship, an existing ONTAP/ElementSW relationship should be present
  • Performs resync if the relationship_state=active and the current mirror state of the snapmirror relationship is broken-off
  • Performs resume if the relationship_state=active, the current snapmirror relationship status is quiesced and mirror state is snapmirrored
  • Performs restore if the relationship_type=restore and all other operations will not be performed during this task

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
connection_type
string
added in 2.9.0 of netapp.ontap
    Choices:
  • ontap_ontap
  • elementsw_ontap
  • ontap_elementsw
Type of SnapMirror relationship.
Pre-requisite for either elementsw_ontap or ontap_elementsw the ElementSW volume should have enableSnapmirror option set to true.
For using ontap_elementsw, elementsw_ontap snapmirror relationship should exist.
create_destination
dictionary
added in 21.1.0 of netapp.ontap
Requires ONTAP 9.7 or later.
Creates the destination volume if enabled and destination_volume is present or destination_path includes a volume name.
Creates and peers the destination vserver for SVM DR.
enabled
boolean
    Choices:
  • no
  • yes
Whether to create the destination volume or vserver.
This is automatically enabled if any other suboption is present.
storage_service
dictionary
storage service associated with the destination endpoint.
enabled
boolean
    Choices:
  • no
  • yes
whether to create the destination endpoint using storage service.
enforce_performance
boolean
    Choices:
  • no
  • yes
whether to enforce storage service performance on the destination endpoint.
name
string
    Choices:
  • value
  • performance
  • extreme
the performance service level (PSL) for this volume endpoint.
tiering
dictionary
Cloud tiering policy.
policy
string
    Choices:
  • all
  • auto
  • none
  • snapshot-only
Cloud tiering policy.
supported
boolean
    Choices:
  • no
  • yes
enable provisioning of the destination endpoint volumes on FabricPool aggregates.
only supported for FlexVol volume, FlexGroup volume, and Consistency Group endpoints.
destination_cluster
string
added in 21.1.0 of netapp.ontap
Requires ONTAP 9.7 or higher.
Required to create the destination vserver for SVM DR or the destination volume.
Deprecated as of 21.2.0, use destination_endpoint and cluster.
destination_endpoint
dictionary
added in 21.2.0 of netapp.ontap
destination endpoint of a SnapMirror relationship.
cluster
string
Requires ONTAP 9.7 or higher.
Required to create the destination vserver for SVM DR or the destination volume.
consistency_group_volumes
list / elements=string
Requires ONTAP 9.8 or higher.
Mandatory property for a Consistency Group endpoint. Specifies the list of FlexVol volumes for a Consistency Group.
ipspace
string
Requires ONTAP 9.8 or higher.
Optional property to specify the IPSpace of the SVM.
path
string / required
The destination endpoint for the relationship.
format is <vserver:volume>, <vserver:>, <vserver:/cg/cg_name>
svm
string
The name of the SVM. Not sure when this is needed.
destination_path
string
Specifies the destination endpoint of the SnapMirror relationship.
Deprecated as of 21.2.0, use destination_endpoint and path.
destination_volume
string
Specifies the name of the destination volume for the SnapMirror.
Deprecated as of 21.2.0, use source_endpoint and path.
destination_vserver
string
Name of the destination vserver for the SnapMirror.
Deprecated as of 21.2.0, use destination_endpoint and path, or svm.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
identity_preserve
boolean
added in 2.9.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies whether or not the identity of the source Vserver is replicated to the destination Vserver.
If this parameter is set to true, the source Vserver's configuration will additionally be replicated to the destination.
If the parameter is set to false, then only the source Vserver's volumes and RBAC configuration are replicated to the destination.
initialize
boolean
added in 19.11.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies whether to initialize SnapMirror relation.
Default is True, it can be explicitly set to False to avoid initializing SnapMirror relation.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
max_transfer_rate
integer
added in 2.9.0 of netapp.ontap
Specifies the upper bound, in kilobytes per second, at which data is transferred.
Default is unlimited, it can be explicitly set to 0 as unlimited.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
policy
string
added in 2.8.0 of netapp.ontap
Specify the name of the SnapMirror policy that applies to this relationship.
relationship_info_only
boolean
added in 20.4.0 of netapp.ontap
    Choices:
  • no
  • yes
If relationship-info-only is set to true then only relationship information is removed.
relationship_state
string
added in 20.2.0 of netapp.ontap
    Choices:
  • active
  • broken
Specifies whether to break SnapMirror relation or establish a SnapMirror relationship.
state must be present to use this option.
relationship_type
string
    Choices:
  • data_protection
  • load_sharing
  • vault
  • restore
  • transition_data_protection
  • extended_data_protection
Specify the type of SnapMirror relationship.
for 'restore' unless 'source_snapshot' is specified the most recent Snapshot copy on the source volume is restored.
restore SnapMirror is not idempotent.
With REST, only 'extended_data_protection' is supported. ('restore' is TBD)
schedule
string
Specify the name of the current schedule, which is used to update the SnapMirror relationship.
Optional for create, modifiable.
source_cluster
string
added in 21.1.0 of netapp.ontap
Requires ONTAP 9.7 or higher.
Required to create the peering relationship between source and destination SVMs.
Deprecated as of 21.2.0, use source_endpoint and cluster.
source_endpoint
dictionary
added in 21.2.0 of netapp.ontap
source endpoint of a SnapMirror relationship.
cluster
string
Requires ONTAP 9.7 or higher.
Required to create the peering relationship between source and destination SVMs.
consistency_group_volumes
list / elements=string
Requires ONTAP 9.8 or higher.
Mandatory property for a Consistency Group endpoint. Specifies the list of FlexVol volumes for a Consistency Group.
ipspace
string
Requires ONTAP 9.8 or higher.
Optional property to specify the IPSpace of the SVM.
path
string / required
The source endpoint for the relationship.
If the source is an ONTAP volume (FlexVol or FlexGroup), format should be <vserver:volume>
For SVM DR, format should be <vserver:>
For a consistency group, format should be <vserver:/cg/cg_name>
If the source is an ElementSW volume, format should be <Element_SVIP:/lun/Element_VOLUME_ID>
If the source is an ElementSW volume, the volume should have SnapMirror enabled.
svm
string
The name of the SVM. Not sure when this is needed.
source_hostname
string
Source hostname or management IP address for ONTAP or ElementSW cluster.
Required for SnapMirror delete
source_password
string
Source password for ONTAP or ElementSW cluster.
Optional if this is same as destination password.
source_path
string
Specifies the source endpoint of the SnapMirror relationship.
If the source is an ONTAP volume, format should be <[vserver:][volume]> or <[[cluster:]//vserver/]volume>
If the source is an ElementSW volume, format should be <[Element_SVIP]:/lun/[Element_VOLUME_ID]>
If the source is an ElementSW volume, the volume should have SnapMirror enabled.
Deprecated as of 21.2.0, use source_endpoint and path.
source_snapshot
string
added in 20.6.0 of netapp.ontap
Specifies the Snapshot from the source to be restored.
source_username
string
Source username for ONTAP or ElementSW cluster.
Optional if this is same as destination username.
source_volume
string
Specifies the name of the source volume for the SnapMirror.
Deprecated as of 21.2.0, use source_endpoint and path.
source_vserver
string
Name of the source vserver for the SnapMirror.
Deprecated as of 21.2.0, use source_endpoint and path, or svm.
state
string
    Choices:
  • present
  • absent
Whether the specified relationship should exist or not.
update
boolean
added in 20.2.0 of netapp.ontap
    Choices:
  • no
  • yes
Specifies whether to update the destination endpoint of the SnapMirror relationship only if the relationship is already present and active.
Default is True.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

# creates and initializes the snapmirror
- name: Create ONTAP/ONTAP SnapMirror
  na_ontap_snapmirror:
    state: present
    source_volume: test_src
    destination_volume: test_dest
    source_vserver: ansible_src
    destination_vserver: ansible_dest
    schedule: hourly
    policy: MirrorAllSnapshots
    max_transfer_rate: 1000
    initialize: False
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

# creates and initializes the snapmirror between vservers
- name: Create ONTAP/ONTAP vserver SnapMirror
  na_ontap_snapmirror:
    state: present
    source_vserver: ansible_src
    destination_vserver: ansible_dest
    identity_preserve: true
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

# existing snapmirror relation with status 'snapmirrored' will be initialized
- name: Inititalize ONTAP/ONTAP SnapMirror
  na_ontap_snapmirror:
    state: present
    source_path: 'ansible:test'
    destination_path: 'ansible:dest'
    relationship_state: active
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

- name: Delete SnapMirror
  na_ontap_snapmirror:
    state: absent
    destination_path: <path>
    relationship_info_only: True
    source_hostname: "{{ source_hostname }}"
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

- name: Break SnapMirror
  na_ontap_snapmirror:
    state: present
    relationship_state: broken
    destination_path: <path>
    source_hostname: "{{ source_hostname }}"
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

- name: Restore SnapMirror volume using location (Idempotency)
  na_ontap_snapmirror:
    state: present
    source_path: <path>
    destination_path: <path>
    relationship_type: restore
    source_snapshot: "{{ snapshot }}"
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

- name: Set schedule to NULL
  na_ontap_snapmirror:
    state: present
    destination_path: <path>
    schedule: ""
    hostname: "{{ destination_cluster_hostname }}"
    username: "{{ destination_cluster_username }}"
    password: "{{ destination_cluster_password }}"

- name: Create SnapMirror from ElementSW to ONTAP
  na_ontap_snapmirror:
    state: present
    connection_type: elementsw_ontap
    source_path: '10.10.10.10:/lun/300'
    destination_path: 'ansible_test:ansible_dest_vol'
    schedule: hourly
    policy: MirrorLatest
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    source_hostname: " {{ Element_cluster_mvip }}"
    source_username: "{{ Element_cluster_username }}"
    source_password: "{{ Element_cluster_password }}"

- name: Create SnapMirror from ONTAP to ElementSW
  na_ontap_snapmirror:
    state: present
    connection_type: ontap_elementsw
    destination_path: '10.10.10.10:/lun/300'
    source_path: 'ansible_test:ansible_dest_vol'
    policy: MirrorLatest
    hostname: "{{ Element_cluster_mvip }}"
    username: "{{ Element_cluster_username }}"
    password: "{{ Element_cluster_password }}"
    source_hostname: " {{ netapp_hostname }}"
    source_username: "{{ netapp_username }}"
    source_password: "{{ netapp_password }}"

- name: Create Snapmirror relationship (create destination volume)
  tags: create
  na_ontap_snapmirror:
    state: present
    source_endpoint:
      cluster: "{{ _source_cluster }}"
      path: "{{ source_vserver + ':' + source_volume }}"
    destination_endpoint:
      cluster: "{{ _destination_cluster }}"
      path: "{{ destination_vserver_VOLDP + ':' + destination_volume }}"
    create_destination:
      enabled: true
    hostname: "{{ destination_hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"
    https: true
    validate_certs: false

- name: Create SnapMirror relationship - SVM DR (creating and peering destination svm)
  tags: create_svmdr
  na_ontap_snapmirror:
    state: present
    source_endpoint:
      cluster: "{{ _source_cluster }}"
      path: "{{ source_vserver + ':' }}"
    destination_endpoint:
      cluster: "{{ _destination_cluster }}"
      path: "{{ destination_vserver_SVMDR + ':' }}"
    create_destination:
      enabled: true
    hostname: "{{ destination_hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"
    https: true
    validate_certs: false

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/netapp/ontap/na_ontap_snapmirror_module.html