W3cubDocs

/Ansible

wti.remote.cpm_snmp_config – Set network IPTables parameters in WTI OOB and PDU devices

Note

This plugin is part of the wti.remote collection (version 1.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install wti.remote.

To use it in a playbook, specify: wti.remote.cpm_snmp_config.

New in version 2.10: of wti.remote

Synopsis

  • Set network IPTables parameters in WTI OOB and PDU devices

Parameters

Parameter Choices/Defaults Comments
authpass
list / elements=string
Sets the Authentication Password for SNMPv3 (V3 only).
authpriv
list / elements=string
Configures the Authentication and Privacy features for SNMPv3 communication, 0 = Auth/NoPriv, 1 = Auth/Priv (V3 only).
authproto
list / elements=string
Which authentication protocol will be used, 0 = MD5, 1 = SHA1 (V3 only).
clear
integer
    Choices:
  • 0
  • 1
Removes all the users for the protocol being defined before setting the newly defined entries.
contact
string
The name of the administrator responsible for SNMP issues.
cpm_password
string / required
This is the Password of the WTI device to send the module.
cpm_url
string / required
This is the URL of the WTI device to send the module.
cpm_username
string / required
This is the Username of the WTI device to send the module.
enable
integer
    Choices:
  • 0
  • 1
The activates SNMP polling for the specified interface and protocol.
index
list / elements=string
Index of the user being modified (V3 only).
interface
string
    Choices:
  • eth0
  • eth1
  • ppp0
The ethernet port for the SNMP we are defining.
location
string
The location of the SNMP Server.
privpass
list / elements=string
Sets the Privacy Password for SNMPv3 (V3 only) (V3 only).
privproto
list / elements=string
Which privacy protocol will be used, 0 = DES, 1 = AES128 (V3 only).
protocol
integer
    Choices:
  • 0
  • 1
The protocol that the SNMP entry should be applied. 0 = ipv4, 1 = ipv6.
readonly
integer
    Choices:
  • 0
  • 1
Controls the ability to change configuration parameters with SNMP.
rocommunity
string
Read Only Community Password, not used for SNMP V3.
rwcommunity
string
Read/Write Community Password, not used for SNMP V3.
systemname
string
The hostname of the WTI Device.
use_https
boolean
    Choices:
  • no
  • yes ←
Designates to use an https connection or http connection.
use_proxy
boolean
    Choices:
  • no ←
  • yes
Flag to control if the lookup will observe HTTP proxy environment variables when present.
username
list / elements=string
Sets the User Name for SNMPv3 access (V3 only).
validate_certs
boolean
    Choices:
  • no
  • yes ←
If false, SSL certificates will not be validated. This should only be used
on personally controlled sites using self-signed certificates.
version
integer
    Choices:
  • 0
  • 1
  • 2
Defined which version of SNMP the device will respond to 0 = V1/V2 Only, 1 = V3 Only, 2 = V1/V2/V3.

Notes

Note

  • Use groups/cpm in module_defaults to set common options used between CPM modules.

Examples

# Sets the device SNMP Parameters
- name: Set the an SNMP Parameter for a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    interface: "eth0"
    use_https: true
    validate_certs: false
    protocol: 0
    clear: 1
    enable: 1
    readonly: 0
    version: 0
    rocommunity: "ropassword"
    rwcommunity: "rwpassword"

# Sets the device SNMP Parameters
- name: Set the SNMP Parameters a WTI device
  cpm_iptables_config:
    cpm_url: "nonexist.wti.com"
    cpm_username: "super"
    cpm_password: "super"
    use_https: true
    validate_certs: false
    version: 1
    index:
      - 1
      - 2
    username:
      - "username1"
      - "username2"
    authpriv:
      - 1
      - 1
    authpass:
      - "authpass1"
      - "uthpass2"
    authproto:
      - 1
      - 1
    privpass:
      - "authpass1"
      - "uthpass2"
    privproto:
      - 1
      - 1

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
data
complex
always
The output JSON returned from the commands sent
snmpaccess
dictionary
always
Current k/v pairs of interface info for the WTI device after module execution.

Sample:
[{'eth0': {'ietf-ipv4': {'clear': 1, 'enable': 0, 'readonly': 0, 'users': [{'authpass': 'testpass', 'authpriv': '1', 'authproto': '0', 'index': '1', 'privpass': 'privpass1', 'privproto': '0', 'username': 'username1'}], 'version': 0}}}]


Authors

  • Western Telematic Inc. (@wtinetworkgear)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/wti/remote/cpm_snmp_config_module.html