W3cubDocs

/Ansible 2.10

cisco.ios.ios_acl_interfaces – ACL interfaces resource module

Note

This plugin is part of the cisco.ios collection.

To install it use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_acl_interfaces.

New in version 1.0.0: of cisco.ios

Synopsis

  • This module configures and manages the access-control (ACL) attributes of interfaces on IOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of ACL interfaces options
access_groups
list / elements=dictionary
Specify access-group for IP access list (standard or extended).
acls
list / elements=dictionary
Specifies the ACLs for the provided AFI.
direction
string / required
    Choices:
  • in
  • out
Specifies the direction of packets that the ACL will be applied on.
With one direction already assigned, other acl direction cannot be same.
name
string / required
Specifies the name of the IPv4/IPv4 ACL for the interface.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Specifies the AFI for the ACLs to be configured on this interface.
name
string / required
Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
running_config
string
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state the configuration should be left in
The states rendered, gathered and parsed does not perform any change on the device.
The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.
The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.
The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Notes

Note

  • Tested against Cisco IOSv Version 15.2 on VIRL

Examples

# Using Merged

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
#  ip access-group 123 out

- name: Merge module attributes of given access-groups
  cisco.ios.ios_acl_interfaces:
    config:
    - name: GigabitEthernet0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: 110
          direction: in
        - name: 123
          direction: out
      - afi: ipv6
        acls:
        - name: test_v6
          direction: out
        - name: temp_v6
          direction: in
    - name: GigabitEthernet0/2
      access_groups:
      - afi: ipv4
        acls:
        - name: 100
          direction: in
    state: merged

# Commands Fired:
# ---------------
#
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 100 in
#  ip access-group 123 out


# After state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

# Using Replaced

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

- name: Replace module attributes of given access-groups
  cisco.ios.ios_acl_interfaces:
    config:
    - name: GigabitEthernet0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: 100
          direction: out
        - name: 110
          direction: in
    state: replaced

# Commands Fired:
# ---------------
#
# interface GigabitEthernet0/1
# no ip access-group 123 out
# no ipv6 traffic-filter temp_v6 in
# no ipv6 traffic-filter test_v6 out
# ip access-group 100 out

# After state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 100 out
#  ip access-group 110 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

# Using Overridden

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

- name: Overridden module attributes of given access-groups
  cisco.ios.ios_acl_interfaces:
    config:
    - name: GigabitEthernet0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: 100
          direction: out
        - name: 110
          direction: in
    state: overridden

# Commands Fired:
# ---------------
#
# interface GigabitEthernet0/1
# no ip access-group 123 out
# no ipv6 traffic-filter test_v6 out
# no ipv6 traffic-filter temp_v6 in
# ip access-group 100 out
# interface GigabitEthernet0/2
# no ip access-group 110 in
# no ip access-group 123 out

# After state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 100 out
#  ip access-group 110 in
# interface GigabitEthernet0/2

# Using Deleted

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

- name: Delete module attributes of given Interface
  cisco.ios.ios_acl_interfaces:
    config:
    - name: GigabitEthernet0/1
    state: deleted

# Commands Fired:
# ---------------
#
# interface GigabitEthernet0/1
# no ip access-group 110 in
# no ip access-group 123 out
# no ipv6 traffic-filter test_v6 out
# no ipv6 traffic-filter temp_v6 in

# After state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

# Using DELETED without any config passed
#"(NOTE: This will delete all of configured resource module attributes from each configured interface)"

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

- name: Delete module attributes of given access-groups from ALL Interfaces
  cisco.ios.ios_acl_interfaces:
    config:
    state: deleted

# Commands Fired:
# ---------------
#
# interface GigabitEthernet0/1
# no ip access-group 110 in
# no ip access-group 123 out
# no ipv6 traffic-filter test_v6 out
# no ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
# no ip access-group 110 out
# no ip access-group 123 out

# After state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2

# Using Gathered

# Before state:
# -------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

- name: Gather listed acl interfaces with provided configurations
  cisco.ios.ios_acl_interfaces:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "name": "Loopback888"
#         },
#         {
#             "name": "GigabitEthernet0/0"
#         },
#         {
#             "access_groups": [
#                 {
#                     "acls": [
#                         {
#                             "direction": "in",
#                             "name": "110"
#                         },
#                         {
#                             "direction": "out",
#                             "name": "123"
#                         }
#                     ],
#                     "afi": "ipv4"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "direction": "in",
#                             "name": "temp_v6"
#                         },
#                         {
#                             "direction": "out",
#                             "name": "test_v6"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ],
#             "name": "GigabitEthernet0/1"
#         },
#         {
#             "access_groups": [
#                 {
#                     "acls": [
#                         {
#                             "direction": "in",
#                             "name": "100"
#                         },
#                         {
#                             "direction": "out",
#                             "name": "123"
#                         }
#                     ],
#                     "afi": "ipv4"
#                 }
#             ],
#             "name": "GigabitEthernet0/2"
#         }
#     ]

# After state:
# ------------
#
# vios#sh running-config | include interface|ip access-group|ipv6 traffic-filter
# interface Loopback888
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip access-group 110 in
#  ip access-group 123 out
#  ipv6 traffic-filter test_v6 out
#  ipv6 traffic-filter temp_v6 in
# interface GigabitEthernet0/2
#  ip access-group 110 in
#  ip access-group 123 out

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_acl_interfaces:
    config:
    - name: GigabitEthernet0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: 110
          direction: in
        - name: 123
          direction: out
      - afi: ipv6
        acls:
        - name: test_v6
          direction: out
        - name: temp_v6
          direction: in
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "interface GigabitEthernet0/1",
#         "ip access-group 110 in",
#         "ip access-group 123 out",
#         "ipv6 traffic-filter temp_v6 in",
#         "ipv6 traffic-filter test_v6 out"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/1
# ip access-group 110 in
# ip access-group 123 out
# ipv6 traffic-filter temp_v6 in
# ipv6 traffic-filter test_v6 out

- name: Parse the commands for provided configuration
  cisco.ios.ios_acl_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "access_groups": [
#                 {
#                     "acls": [
#                         {
#                             "direction": "in",
#                             "name": "110"
#                         }
#                     ],
#                     "afi": "ipv4"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "direction": "in",
#                             "name": "temp_v6"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ],
#             "name": "GigabitEthernet0/1"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device

Sample:
['interface GigabitEthernet0/1', 'ip access-group 110 in', 'ipv6 traffic-filter test_v6 out']


Authors

  • Sumit Jaiswal (@justjais)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/ios/ios_acl_interfaces_module.html