Note
This plugin is part of the cisco.ios collection.
To install it use: ansible-galaxy collection install cisco.ios.
To use it in a playbook, specify: cisco.ios.ios_l2_interface.
New in version 1.0.0: of cisco.ios
major release after 2022-06-01
Newer and updated modules released with more functionality in Ansible 2.9
ios_l2_interfaces
Note
This module has a corresponding action plugin.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| access_vlan string | Configure given VLAN in access port. If mode=access, used as the access VLAN ID. | ||
| aggregate list / elements=dictionary | List of Layer-2 interface definitions. | ||
| access_vlan string | Configure given VLAN in access port. If mode=access, used as the access VLAN ID. | ||
| mode string |
| Mode in which interface needs to be configured. | |
| name string / required | Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1. aliases: interface | ||
| native_vlan string | Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID. | ||
| state string |
| Manage the state of the Layer-2 Interface configuration. | |
| trunk_allowed_vlans string | List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15". | ||
| trunk_vlans string | List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk. | ||
| mode string |
| Mode in which interface needs to be configured. | |
| name string | Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1. aliases: interface | ||
| native_vlan string | Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID. | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli.For more information please see the IOS Platform Options guide. A dict object containing connection details. | ||
| auth_pass string | Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead. | ||
| authorize boolean |
| Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead. | |
| host string | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Specifies the port to use when building the connection to the remote device. | ||
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| state string |
| Manage the state of the Layer-2 Interface configuration. | |
| trunk_allowed_vlans string | List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15". | ||
| trunk_vlans string | List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk. | ||
Note
- name: Ensure GigabitEthernet0/5 is in its default l2 interface state
ios.ios_l2_interface:
name: GigabitEthernet0/5
state: unconfigured
- name: Ensure GigabitEthernet0/5 is configured for access vlan 20
ios.ios_l2_interface:
name: GigabitEthernet0/5
mode: access
access_vlan: 20
- name: Ensure GigabitEthernet0/5 only has vlans 5-10 as trunk vlans
ios.ios_l2_interface:
name: GigabitEthernet0/5
mode: trunk
native_vlan: 10
trunk_allowed_vlans: 5-10
- name: Ensure GigabitEthernet0/5 is a trunk port and ensure 2-50 are being tagged
(doesn't mean others aren't also being tagged)
ios.ios_l2_interface:
name: GigabitEthernet0/5
mode: trunk
native_vlan: 10
trunk_vlans: 2-50
- name: Ensure these VLANs are not being tagged on the trunk
ios.ios_l2_interface:
name: GigabitEthernet0/5
mode: trunk
trunk_vlans: 51-4094
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list / elements=string | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device Sample: ['interface GigabitEthernet0/5', 'switchport access vlan 20'] |
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/ios/ios_l2_interface_module.html