W3cubDocs

/Ansible 2.10

cisco.ios.ios_lacp_interfaces – LACP interfaces resource module

Note

This plugin is part of the cisco.ios collection.

To install it use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_lacp_interfaces.

New in version 1.0.0: of cisco.ios

Synopsis

  • This module provides declarative management of LACP on Cisco IOS network devices lacp_interfaces.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of LACP lacp_interfaces option
fast_switchover
boolean
    Choices:
  • no
  • yes
LACP fast switchover supported on this port channel.
max_bundle
integer
LACP maximum number of ports to bundle in this port channel.
Refer to vendor documentation for valid port values.
name
string / required
Name of the Interface for configuring LACP.
port_priority
integer
LACP priority on this interface.
Refer to vendor documentation for valid port values.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS device by executing the command show running-config | section ^interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • rendered
  • gathered
  • parsed
The state the configuration should be left in
The states rendered, gathered and parsed does not perform any change on the device.
The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.
The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.
The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Notes

Note

  • Tested against Cisco IOSv Version 15.2 on VIRL.

Examples

# Using merged
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

- name: Merge provided configuration with device configuration
  cisco.ios.ios_lacp_interfaces:
    config:
    - name: GigabitEthernet0/1
      port_priority: 10
    - name: GigabitEthernet0/2
      port_priority: 20
    - name: GigabitEthernet0/3
      port_priority: 30
    - name: Port-channel10
      fast_switchover: true
      max_bundle: 5
    state: merged

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

# Using overridden
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: Override device configuration of all lacp_interfaces with provided configuration
  cisco.ios.ios_lacp_interfaces:
    config:
    - name: GigabitEthernet0/1
      port_priority: 20
    - name: Port-channel10
      max_bundle: 2
    state: overridden

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

# Using replaced
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: Replaces device configuration of listed lacp_interfaces with provided configuration
  cisco.ios.ios_lacp_interfaces:
    config:
    - name: GigabitEthernet0/3
      port_priority: 40
    - name: Port-channel10
      fast_switchover: true
      max_bundle: 2
    state: replaced

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 40

# Using Deleted
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  flowcontrol receive on
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: "Delete LACP attributes of given interfaces (Note: This won't delete the interface itself)"
  cisco.ios.ios_lacp_interfaces:
    config:
    - name: GigabitEthernet0/1
    state: deleted

# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
# interface Port-channel20
#  lacp max-bundle 2
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: "Delete LACP attributes for all configured interfaces (Note: This won't delete the interface itself)"
  cisco.ios.ios_lacp_interfaces:
    state: deleted

# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

# Using Gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel40
#  lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  lacp port-priority 30
# interface GigabitEthernet0/2
#  lacp port-priority 20

- name: Gather listed LACP interfaces with provided configurations
  cisco.ios.ios_lacp_interfaces:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "fast_switchover": true,
#             "max_bundle": 2,
#             "name": "Port-channel10"
#         },
#         {
#             "max_bundle": 5,
#             "name": "Port-channel40"
#         },
#         {
#             "name": "GigabitEthernet0/0"
#         },
#         {
#             "name": "GigabitEthernet0/1",
#             "port_priority": 30
#         },
#         {
#             "name": "GigabitEthernet0/2",
#             "port_priority": 20
#         }
#     ]

# After state:
# ------------
#
# vios#sh running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel40
#  lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  lacp port-priority 30
# interface GigabitEthernet0/2
#  lacp port-priority 20

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_lacp_interfaces:
    config:
    - name: GigabitEthernet0/1
      port_priority: 10
    - name: GigabitEthernet0/2
      port_priority: 20
    - name: Port-channel10
      fast_switchover: true
      max_bundle: 2
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "interface GigabitEthernet0/1",
#         "lacp port-priority 10",
#         "interface GigabitEthernet0/2",
#         "lacp port-priority 20",
#         "interface Port-channel10",
#         "lacp max-bundle 2",
#         "lacp fast-switchover"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/1
# lacp port-priority 10
# interface GigabitEthernet0/2
# lacp port-priority 20
# interface Port-channel10
# lacp max-bundle 2 fast-switchover

- name: Parse the commands for provided configuration
  cisco.ios.ios_lacp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "name": "GigabitEthernet0/1",
#             "port_priority": 10
#         },
#         {
#             "name": "GigabitEthernet0/2",
#             "port_priority": 20
#         },
#         {
#             "fast_switchover": true,
#             "max_bundle": 2,
#             "name": "Port-channel10"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['interface GigabitEthernet 0/1', 'lacp port-priority 30']


Authors

  • Sumit Jaiswal (@justjais)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/ios/ios_lacp_interfaces_module.html