Note
This plugin is part of the cisco.ios collection.
To install it use: ansible-galaxy collection install cisco.ios.
To use it in a playbook, specify: cisco.ios.ios_ospf_interfaces.
New in version 1.0.0: of cisco.ios
| Parameter | Choices/Defaults | Comments | |||||
|---|---|---|---|---|---|---|---|
| config list / elements=dictionary | A dictionary of OSPF interfaces options. | ||||||
| address_family list / elements=dictionary | OSPF interfaces settings on the interfaces in address-family context. | ||||||
| adjacency boolean |
| Adjacency staggering | |||||
| afi string / required |
| Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces. | |||||
| authentication dictionary | Enable authentication | ||||||
| key_chain string | Use a key-chain for cryptographic authentication keys | ||||||
| message_digest string | Use message-digest authentication | ||||||
| null string | Use no authentication | ||||||
| bfd boolean |
| BFD configuration commands Enable/Disable BFD on this interface | |||||
| cost dictionary | Interface cost | ||||||
| dynamic_cost dictionary | Specify dynamic cost options Valid only with IPv6 OSPF config | ||||||
| default integer | Specify default link metric value | ||||||
| hysteresis dictionary | Specify hysteresis value for LSA dampening | ||||||
| percent integer | Specify hysteresis percent changed. Please refer vendor documentation of Valid values. | ||||||
| threshold integer | Specify hysteresis threshold value. Please refer vendor documentation of Valid values. | ||||||
| weight dictionary | Specify weight to be placed on individual metrics | ||||||
| l2_factor integer | Specify weight to be given to L2-factor metric Percentage weight of L2-factor metric. Please refer vendor documentation of Valid values. | ||||||
| latency integer | Specify weight to be given to latency metric. Percentage weight of latency metric. Please refer vendor documentation of Valid values. | ||||||
| oc boolean |
| Specify weight to be given to cdr/mdr for oc Give 100 percent weightage for current data rate(0 for maxdatarate) | |||||
| resources integer | Specify weight to be given to resources metric Percentage weight of resources metric. Please refer vendor documentation of Valid values. | ||||||
| throughput integer | Specify weight to be given to throughput metric Percentage weight of throughput metric. Please refer vendor documentation of Valid values. | ||||||
| interface_cost integer | Interface cost or Route cost of this interface | ||||||
| database_filter boolean |
| Filter OSPF LSA during synchronization and flooding | |||||
| dead_interval dictionary | Interval after which a neighbor is declared dead | ||||||
| minimal integer | Set to 1 second and set multiplier for Hellos Number of Hellos sent within 1 second. Please refer vendor documentation of Valid values. Valid only with IP OSPF config | ||||||
| time integer | time in seconds | ||||||
| demand_circuit dictionary | OSPF Demand Circuit, enable or disable the demand circuit' | ||||||
| disable boolean |
| Disable demand circuit on this interface Valid only with IPv6 OSPF config | |||||
| enable boolean |
| Enable Demand Circuit | |||||
| ignore boolean |
| Ignore demand circuit auto-negotiation requests | |||||
| flood_reduction boolean |
| OSPF Flood Reduction | |||||
| hello_interval integer | Time between HELLO packets Please refer vendor documentation of Valid values. | ||||||
| lls boolean |
| Link-local Signaling (LLS) support Valid only with IP OSPF config | |||||
| manet dictionary | Mobile Adhoc Networking options MANET Peering options Valid only with IPv6 OSPF config | ||||||
| cost dictionary | Redundant path cost improvement required to peer | ||||||
| percent integer | Relative incremental path cost. Please refer vendor documentation of Valid values. | ||||||
| threshold integer | Absolute incremental path cost. Please refer vendor documentation of Valid values. | ||||||
| link_metrics dictionary | Redundant path cost improvement required to peer | ||||||
| cost_threshold integer | Minimum link cost threshold. Please refer vendor documentation of Valid values. | ||||||
| set boolean |
| Enable link-metrics | |||||
| mtu_ignore boolean |
| Ignores the MTU in DBD packets | |||||
| multi_area dictionary | Set the OSPF multi-area ID Valid only with IP OSPF config | ||||||
| cost integer | Interface cost | ||||||
| id integer | OSPF multi-area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF multi-area ID in IP address format(e.g. A.B.C.D) | ||||||
| neighbor dictionary | OSPF neighbor link-local IPv6 address (X:X:X:X::X) Valid only with IPv6 OSPF config | ||||||
| address string | Neighbor link-local IPv6 address | ||||||
| cost integer | OSPF cost for point-to-multipoint neighbor | ||||||
| database_filter boolean |
| Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor | |||||
| poll_interval integer | OSPF dead-router polling interval | ||||||
| priority integer | OSPF priority of non-broadcast neighbor | ||||||
| network dictionary | Network type | ||||||
| broadcast boolean |
| Specify OSPF broadcast multi-access network | |||||
| manet boolean |
| Specify MANET OSPF interface type Valid only with IPv6 OSPF config | |||||
| non_broadcast boolean |
| Specify OSPF NBMA network | |||||
| point_to_multipoint boolean |
| Specify OSPF point-to-multipoint network | |||||
| point_to_point boolean |
| Specify OSPF point-to-point network | |||||
| prefix_suppression boolean |
| Enable/Disable OSPF prefix suppression | |||||
| priority integer | Router priority. Please refer vendor documentation of Valid values. | ||||||
| process dictionary | OSPF interfaces process config | ||||||
| area_id string | OSPF interfaces area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF interfaces area ID in IP address format(e.g. A.B.C.D) | ||||||
| id integer | Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces. Please refer vendor documentation of Valid values. | ||||||
| instance_id integer | Set the OSPF instance based on ID Valid only with IPv6 OSPF config | ||||||
| secondaries boolean |
| Include or exclude secondary IP addresses. Valid only with IPv4 config | |||||
| resync_timeout integer | Interval after which adjacency is reset if oob-resync is not started. Please refer vendor documentation of Valid values. | ||||||
| retransmit_interval integer | Time between retransmitting lost link state advertisements. Please refer vendor documentation of Valid values. | ||||||
| shutdown boolean |
| Set OSPF protocol's state to disable under current interface | |||||
| transmit_delay integer | Link state transmit delay. Please refer vendor documentation of Valid values. | ||||||
| ttl_security dictionary | TTL security check Valid only with IPV4 OSPF config | ||||||
| hops integer | Maximum number of IP hops allowed Please refer vendor documentation of Valid values. | ||||||
| set boolean |
| Enable TTL Security on all interfaces | |||||
| name string / required | Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1. | ||||||
| running_config string | This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^interface. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result. | ||||||
| state string |
| The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required. | |||||
Note
# Using deleted
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ipv6 ospf 55 area 105
# ipv6 ospf priority 20
# ipv6 ospf transmit-delay 30
# ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
# ip ospf priority 40
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf 10 area 20
# ip ospf cost 30
- name: Delete provided OSPF Interface config
cisco.ios.ios_ospf_interfaces:
config:
- name: GigabitEthernet0/1
state: deleted
# Commands Fired:
# ---------------
#
# "commands": [
# "interface GigabitEthernet0/1",
# "no ipv6 ospf 55 area 105",
# "no ipv6 ospf adjacency stagger disable",
# "no ipv6 ospf priority 20",
# "no ipv6 ospf transmit-delay 30"
# ]
# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
# ip ospf priority 40
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf 10 area 20
# ip ospf cost 30
# Using deleted without any config passed (NOTE: This will delete all OSPF Interfaces configuration from device)
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ipv6 ospf 55 area 105
# ipv6 ospf priority 20
# ipv6 ospf transmit-delay 30
# ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
# ip ospf priority 40
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf 10 area 20
# ip ospf cost 30
- name: Delete all OSPF config from interfaces
cisco.ios.ios_ospf_interfaces:
state: deleted
# Commands Fired:
# ---------------
#
# "commands": [
# "interface GigabitEthernet0/2",
# "no ip ospf 10 area 20",
# "no ip ospf adjacency stagger disable",
# "no ip ospf cost 30",
# "no ip ospf priority 40",
# "no ip ospf ttl-security hops 50",
# "interface GigabitEthernet0/1",
# "no ipv6 ospf 55 area 105",
# "no ipv6 ospf adjacency stagger disable",
# "no ipv6 ospf priority 20",
# "no ipv6 ospf transmit-delay 30"
# ]
# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
# Using merged
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# router-ios#
- name: Merge provided OSPF Interfaces configuration
cisco.ios.ios_ospf_interfaces:
config:
- name: GigabitEthernet0/1
address_family:
- afi: ipv4
process:
id: 10
area_id: 30
adjacency: true
bfd: true
cost:
interface_cost: 5
dead_interval:
time: 5
demand_circuit:
ignore: true
network:
broadcast: true
priority: 25
resync_timeout: 10
shutdown: true
ttl_security:
hops: 50
- afi: ipv6
process:
id: 35
area_id: 45
adjacency: true
database_filter: true
manet:
link_metrics:
cost_threshold: 10
priority: 55
transmit_delay: 45
state: merged
# Commands Fired:
# ---------------
#
# "commands": [
# "interface GigabitEthernet0/1",
# "ip ospf 10 area 30",
# "ip ospf adjacency stagger disable",
# "ip ospf bfd",
# "ip ospf cost 5",
# "ip ospf dead-interval 5",
# "ip ospf demand-circuit ignore",
# "ip ospf network broadcast",
# "ip ospf priority 25",
# "ip ospf resync-timeout 10",
# "ip ospf shutdown",
# "ip ospf ttl-security hops 50",
# "ipv6 ospf 35 area 45",
# "ipv6 ospf adjacency stagger disable",
# "ipv6 ospf database-filter all out",
# "ipv6 ospf manet peering link-metrics 10",
# "ipv6 ospf priority 55",
# "ipv6 ospf transmit-delay 45"
# ]
# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
# Using overridden
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
- name: Override provided OSPF Interfaces configuration
cisco.ios.ios_ospf_interfaces:
config:
- name: GigabitEthernet0/1
address_family:
- afi: ipv6
process:
id: 55
area_id: 105
adjacency: true
priority: 20
transmit_delay: 30
- name: GigabitEthernet0/2
address_family:
- afi: ipv4
process:
id: 10
area_id: 20
adjacency: true
cost:
interface_cost: 30
priority: 40
ttl_security:
hops: 50
state: overridden
# Commands Fired:
# ---------------
#
# "commands": [
# "interface GigabitEthernet0/2",
# "ip ospf 10 area 20",
# "ip ospf adjacency stagger disable",
# "ip ospf cost 30",
# "ip ospf priority 40",
# "ip ospf ttl-security hops 50",
# "interface GigabitEthernet0/1",
# "ipv6 ospf 55 area 105",
# "no ipv6 ospf database-filter all out",
# "no ipv6 ospf manet peering link-metrics 10",
# "ipv6 ospf priority 20",
# "ipv6 ospf transmit-delay 30",
# "no ip ospf 10 area 30",
# "no ip ospf adjacency stagger disable",
# "no ip ospf bfd",
# "no ip ospf cost 5",
# "no ip ospf dead-interval 5",
# "no ip ospf demand-circuit ignore",
# "no ip ospf network broadcast",
# "no ip ospf priority 25",
# "no ip ospf resync-timeout 10",
# "no ip ospf shutdown",
# "no ip ospf ttl-security hops 50"
# ]
# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ipv6 ospf 55 area 105
# ipv6 ospf priority 20
# ipv6 ospf transmit-delay 30
# ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
# ip ospf priority 40
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf 10 area 20
# ip ospf cost 30
# Using replaced
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
- name: Replaced provided OSPF Interfaces configuration
cisco.ios.ios_ospf_interfaces:
config:
- name: GigabitEthernet0/2
address_family:
- afi: ipv6
process:
id: 55
area_id: 105
adjacency: true
priority: 20
transmit_delay: 30
state: replaced
# Commands Fired:
# ---------------
# "commands": [
# "interface GigabitEthernet0/2",
# "ipv6 ospf 55 area 105",
# "ipv6 ospf adjacency stagger disable",
# "ipv6 ospf priority 20",
# "ipv6 ospf transmit-delay 30"
# ]
# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
# ipv6 ospf 55 area 105
# ipv6 ospf priority 20
# ipv6 ospf transmit-delay 30
# ipv6 ospf adjacency stagger disable
# Using Gathered
# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
- name: Gather OSPF Interfaces provided configurations
cisco.ios.ios_ospf_interfaces:
config:
state: gathered
# Module Execution Result:
# ------------------------
#
# "gathered": [
# {
# "name": "GigabitEthernet0/2"
# },
# {
# "address_family": [
# {
# "adjacency": true,
# "afi": "ipv4",
# "bfd": true,
# "cost": {
# "interface_cost": 5
# },
# "dead_interval": {
# "time": 5
# },
# "demand_circuit": {
# "ignore": true
# },
# "network": {
# "broadcast": true
# },
# "priority": 25,
# "process": {
# "area_id": "30",
# "id": 10
# },
# "resync_timeout": 10,
# "shutdown": true,
# "ttl_security": {
# "hops": 50
# }
# },
# {
# "adjacency": true,
# "afi": "ipv6",
# "database_filter": true,
# "manet": {
# "link_metrics": {
# "cost_threshold": 10
# }
# },
# "priority": 55,
# "process": {
# "area_id": "45",
# "id": 35
# },
# "transmit_delay": 45
# }
# ],
# "name": "GigabitEthernet0/1"
# },
# {
# "name": "GigabitEthernet0/0"
# }
# ]
# After state:
# ------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
# Using Rendered
- name: Render the commands for provided configuration
cisco.ios.ios_ospf_interfaces:
config:
- name: GigabitEthernet0/1
address_family:
- afi: ipv4
process:
id: 10
area_id: 30
adjacency: true
bfd: true
cost:
interface_cost: 5
dead_interval:
time: 5
demand_circuit:
ignore: true
network:
broadcast: true
priority: 25
resync_timeout: 10
shutdown: true
ttl_security:
hops: 50
- afi: ipv6
process:
id: 35
area_id: 45
adjacency: true
database_filter: true
manet:
link_metrics:
cost_threshold: 10
priority: 55
transmit_delay: 45
state: rendered
# Module Execution Result:
# ------------------------
#
# "rendered": [
# "interface GigabitEthernet0/1",
# "ip ospf 10 area 30",
# "ip ospf adjacency stagger disable",
# "ip ospf bfd",
# "ip ospf cost 5",
# "ip ospf dead-interval 5",
# "ip ospf demand-circuit ignore",
# "ip ospf network broadcast",
# "ip ospf priority 25",
# "ip ospf resync-timeout 10",
# "ip ospf shutdown",
# "ip ospf ttl-security hops 50",
# "ipv6 ospf 35 area 45",
# "ipv6 ospf adjacency stagger disable",
# "ipv6 ospf database-filter all out",
# "ipv6 ospf manet peering link-metrics 10",
# "ipv6 ospf priority 55",
# "ipv6 ospf transmit-delay 45"
# ]
# Using Parsed
# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/2
# interface GigabitEthernet0/1
# ip ospf network broadcast
# ip ospf resync-timeout 10
# ip ospf dead-interval 5
# ip ospf priority 25
# ip ospf demand-circuit ignore
# ip ospf bfd
# ip ospf adjacency stagger disable
# ip ospf ttl-security hops 50
# ip ospf shutdown
# ip ospf 10 area 30
# ip ospf cost 5
# ipv6 ospf 35 area 45
# ipv6 ospf priority 55
# ipv6 ospf transmit-delay 45
# ipv6 ospf database-filter all out
# ipv6 ospf adjacency stagger disable
# ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/0
- name: Parse the provided configuration with the exisiting running configuration
cisco.ios.ios_ospf_interfaces:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Module Execution Result:
# ------------------------
#
# "parsed": [
# },
# {
# "name": "GigabitEthernet0/2"
# },
# {
# "address_family": [
# {
# "adjacency": true,
# "afi": "ipv4",
# "bfd": true,
# "cost": {
# "interface_cost": 5
# },
# "dead_interval": {
# "time": 5
# },
# "demand_circuit": {
# "ignore": true
# },
# "network": {
# "broadcast": true
# },
# "priority": 25,
# "process": {
# "area_id": "30",
# "id": 10
# },
# "resync_timeout": 10,
# "shutdown": true,
# "ttl_security": {
# "hops": 50
# }
# },
# {
# "adjacency": true,
# "afi": "ipv6",
# "database_filter": true,
# "manet": {
# "link_metrics": {
# "cost_threshold": 10
# }
# },
# "priority": 55,
# "process": {
# "area_id": "45",
# "id": 35
# },
# "transmit_delay": 45
# }
# ],
# "name": "GigabitEthernet0/1"
# },
# {
# "name": "GigabitEthernet0/0"
# }
# ]
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after dictionary | when changed | The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| before dictionary | always | The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list / elements=string | always | The set of commands pushed to the remote device. Sample: ['interface GigabitEthernet0/1', 'ip ospf 10 area 30', 'ip ospf cost 5', 'ip ospf priority 25'] |
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/ios/ios_ospf_interfaces_module.html