W3cubDocs

/Ansible 2.10

cisco.iosxr.iosxr_command – Run commands on remote devices running Cisco IOS XR

Note

This plugin is part of the cisco.iosxr collection.

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_command.

New in version 1.0.0: of cisco.iosxr

Synopsis

  • Sends arbitrary commands to an IOS XR node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.
  • This module does not support running commands in configuration mode. Please use iosxr_config to configure iosxr devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
commands
list / elements=raw / required
List of commands to send to the remote iosxr device over the configured provider. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has expired.
If a command sent to the device requires answering a prompt, it is possible to pass a dict containing command, answer and prompt. Common answers are 'y' or "\r" (carriage return, must be double quotes). See examples
interval
integer
Default:
1
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again.
match
string
    Choices:
  • any
  • all ←
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the Network Guide.
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device.
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli ←
  • netconf
Specifies the type of connection based transport.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
retries
integer
Default:
10
Specifies the number of retries a command should by tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditions.
wait_for
list / elements=string
List of conditions to evaluate against the output of the command. The task will wait for each condition to be true before moving forward. If the conditional is not true within the configured number of retries, the task fails. See examples.

aliases: waitfor

Notes

Note

  • Make sure the user has been authorized to execute commands terminal length 0, terminal width 512 and terminal exec prompt no-timestamp.
  • This module works with network_cli. See the IOS-XR Platform Options.
  • This module does not support netconf connection.
  • Tested against IOS XR 6.1.3
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: run show version on remote devices
  cisco.iosxr.iosxr_command:
    commands: show version

- name: run show version and check to see if output contains iosxr
  cisco.iosxr.iosxr_command:
    commands: show version
    wait_for: result[0] contains IOS-XR

- name: run multiple commands on remote nodes
  cisco.iosxr.iosxr_command:
    commands:
    - show version
    - show interfaces
    - {command: example command that prompts, prompt: expected prompt, answer: yes}

- name: run multiple commands and evaluate the output
  cisco.iosxr.iosxr_command:
    commands:
    - show version
    - show interfaces
    wait_for:
    - result[0] contains IOS-XR
    - result[1] contains Loopback0

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
failed_conditions
list / elements=string
failed
The list of conditionals that have failed

Sample:
['...', '...']
stdout
list / elements=string
always apart from low level errors (such as action plugin)
The set of responses from the commands

Sample:
['...', '...']
stdout_lines
list / elements=string
always apart from low level errors (such as action plugin)
The value of stdout split into a list

Sample:
[['...', '...'], ['...'], ['...']]


Authors

  • Ricardo Carrillo Cruz (@rcarrillocruz)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_command_module.html