W3cubDocs

/Ansible 2.10

cisco.iosxr.iosxr_lacp_interfaces – LACP interfaces resource module

Note

This plugin is part of the cisco.iosxr collection.

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lacp_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on IOS-XR devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter			Choices/Defaults	Comments
config list / elements=dictionary				A dictionary of LACP interfaces options.
	churn_logging string		Choices: actor partner both	Specifies the parameter for logging of LACP churn events. Valid only for ether-bundles. Mode 'actor' logs actor churn events only. Mode 'partner' logs partner churn events only. Mode 'both' logs actor and partner churn events only.
	collector_max_delay integer			Specifies the collector max delay to be signaled to the LACP partner. Valid only for ether-bundles. Refer to vendor documentation for valid values.
	name string			Name/Identifier of the interface or Ether-Bundle.
	period integer			Specifies the rate at which packets are sent or received. For ether-bundles, this specifies the period to be used by its member links. Refer to vendor documentation for valid values.
	switchover_suppress_flaps integer			Specifies the time for which to suppress flaps during a LACP switchover. Valid only for ether-bundles. Refer to vendor documentation for valid values.
	system dictionary			This dict object contains configurable options related to LACP system parameters for ether-bundles.
		mac string		Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address.
		priority integer		Specifies the system priority to use in LACP negotiations for the bundle. Refer to vendor documentation for valid values.
running_config string				This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config int. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string			Choices: merged ← replaced overridden deleted parsed gathered rendered	The state of the configuration after module completion.

Notes

Note

Tested against IOS-XR 6.1.3.
This module works with connection network_cli. See the IOS-XR Platform Options.

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
#
# RP/0/0/CPU0:an-iosxr#sh running-config interface
# Sun Jul 21 18:01:35.079 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1'
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: actor
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: Bundle-Ether11
      system:
        mac: 00c2.4c00.bd15

    - name: GigabitEthernet0/0/0/1
      period: 200
    state: merged

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#


# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#

- name: Replace LACP configuration of listed interfaces with provided configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: partner

    - name: GigabitEthernet0/0/0/2
      period: 300
    state: replaced

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:50:21.929 UTC
# interface Bundle-Ether10
#  lacp churn logging partner
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  lacp period 300
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#


# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#

- name: Override all interface LACP configuration with provided configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether12
      churn_logging: both
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: GigabitEthernet0/0/0/1
      period: 300
    state: overridden

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr(config-if)#do sh run int
# Sun Jul 21 19:32:36.115 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
#  lacp churn logging both
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 300
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#


# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp non-revertive
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#   lacp period 300
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#

- name: Deleted LACP configurations of provided interfaces (Note - This won't delete
    the interface itself)
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
    - name: Bundle-Ether11
    - name: GigabitEthernet0/0/0/1
    - name: GigabitEthernet0/0/0/2
    state: deleted

#
#
# -----------
# After state
# -----------
#
#
# Using parsed:

# parsed.cfg
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  lacp period 200
# !
#

- name: Convert lacp interfaces config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lacp_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# --------------
# Output:
# --------------

#    parsed:
#      - name: Bundle-Ether10
#        churn_logging: actor
#        collector_max_delay: 100
#        switchover_suppress_flaps: 500
#
#      - name: Bundle-Ether11
#        system:
#          mac: 00c2.4c00.bd15
#
#      - name: GigabitEthernet0/0/0/1
#        period: 200
#
#

# Using gathered:

# Native config:
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  lacp period 200
# !
#

- name: Gather IOSXR lacp interfaces configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    state: gathered

# ----------
# Output
# ---------
#    gathered:
#      - name: Bundle-Ether10
#        churn_logging: actor
#        collector_max_delay: 100
#        switchover_suppress_flaps: 500
#
#      - name: Bundle-Ether11
#        system:
#          mac: 00c2.4c00.bd15
#
#      - name: GigabitEthernet0/0/0/1
#        period: 200

# Using rendered:

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: actor
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: Bundle-Ether11
      system:
        mac: 00c2.4c00.bd15

    - name: GigabitEthernet0/0/0/1
      period: 200
    state: rendered

# -------------
# Output
# -------------
# rendered: [
#     - "interface Bundle-Ether10"
#     - " lacp churn logging actor"
#     - " lacp switchover suppress-flaps 500"
#     - " lacp collector-max-delay 100"
#     - "interface Bundle-Ether11"
#     - " lacp system mac 00c2.4c00.bd15"
#     - "interface MgmtEth0/0/CPU0/0"
#     - " ipv4 address 192.0.2.11 255.255.255.0"
#     - "interface GigabitEthernet0/0/0/1"
#     - " lacp period 200"
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['interface Bundle-Ether10', 'lacp churn logging partner', 'lacp period 150']

Authors

Nilashish Chakraborty (@nilashishc)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_lacp_interfaces_module.html