W3cubDocs

/Ansible 2.10

cisco.iosxr.iosxr_lldp_global – LLDP resource module

Note

This plugin is part of the cisco.iosxr collection.

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_global.

New in version 1.0.0: of cisco.iosxr

Synopsis

  • This module manages Global Link Layer Discovery Protocol (LLDP) settings on IOS-XR devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
The provided global LLDP configuration.
holdtime
integer
Specifies the holdtime (in sec) to be sent in packets.
reinit
integer
Specifies the delay (in sec) for LLDP initialization on any interface.
subinterfaces
boolean
    Choices:
  • no
  • yes
Enable or disable LLDP over sub-interfaces.
timer
integer
Specifies the rate at which LLDP packets are sent (in sec).
tlv_select
dictionary
Specifies the LLDP TLVs to enable or disable.
management_address
boolean
    Choices:
  • no
  • yes
Enable or disable management address TLV.
port_description
boolean
    Choices:
  • no
  • yes
Enable or disable port description TLV.
system_capabilities
boolean
    Choices:
  • no
  • yes
Enable or disable system capabilities TLV.
system_description
boolean
    Choices:
  • no
  • yes
Enable or disable system description TLV.
system_name
boolean
    Choices:
  • no
  • yes
Enable or disable system name TLV.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS-XR device by executing the command show running-config lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • deleted
  • parsed
  • gathered
  • rendered
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
#
# -------------
# Before State
# -------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 19:27:54.933 UTC
# % No such configuration item(s)
#
#

- name: Merge provided LLDP configuration with the existing configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before State
# -------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Replace existing LLDP device configuration with provided configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      tlv_select:
        port_description: false
        system_description: true
        management_description: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#  "commands": [
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable",
#        "lldp tlv-select port-description disable"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "tlv_select": {
#            "port_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:53:08.407 UTC
# lldp
#  holdtime 100
#  tlv-select
#   port-description disable
#  !
# !
#
#


# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Deleted existing LLDP configurations from the device
  cisco.iosxr.iosxr_lldp_global:
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  },
#
#  "commands": [
#        "no lldp holdtime 100",
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable"
#  ]
#
#  "after": {}
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:38:31.187 UTC
# lldp
# !
#
# Using parsed:

# parsed.cfg
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Convert lldp global config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------
# parsed:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using gathered:

# Device config:
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Gather IOSXR lldp global configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
    state: gathered


# ------------------------
# Module Execution Result
# ------------------------
# gathered:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using rendered:

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: rendered

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "rendered": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['lldp subinterfaces enable', 'lldp holdtime 100', 'no lldp tlv-select management-address disable']


Authors

  • Nilashish Chakraborty (@NilashishC)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_lldp_global_module.html