W3cubDocs

/Ansible 2.10

cisco.iosxr.iosxr_lldp_interfaces – LLDP interfaces resource module

Note

This plugin is part of the cisco.iosxr collection.

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis

  • This module manages Link Layer Discovery Protocol (LLDP) attributes of interfaces on IOS-XR devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of LLDP interfaces options.
destination
dictionary
Specifies LLDP destination configuration on the interface.
mac_address
string
    Choices:
  • ieee-nearest-bridge
  • ieee-nearest-non-tmpr-bridge
Specifies the LLDP destination mac address on the interface.
name
string
Name/Identifier of the interface or Ether-Bundle.
receive
boolean
    Choices:
  • no
  • yes
Enable/disable LLDP RX on an interface.
transmit
boolean
    Choices:
  • no
  • yes
Enable/disable LLDP TX on an interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS-XR device by executing the command show running-config int.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • parsed
  • rendered
  • gathered
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:40:23.104 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#

- name: Merge provided configuration with running configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
      transmit: false

    - name: GigabitEthernet0/0/0/2
      destination:
        mac_address: ieee-nearest-bridge
      receive: false
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Replace existing LLDP configurations of specified interfaces with provided
    configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp receive disable",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:02:57.062 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using overridden
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:15:40.465 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Override the LLDP configurations of all the interfaces with provided configurations
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      transmit: false
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1",
#            "transmit": false
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:22:25.604 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   transmit disable
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#


# Using deleted
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:26:21.498 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Delete LLDP configurations of all interfaces (Note - This won't delete the
    interfaces themselves)
  cisco.iosxr.iosxr_lldp_interfaces:
    state: deleted

#
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:30:14.618 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using parsed:
# parsed.cfg

# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Convert lacp interfaces config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------

# parsed: [
#   - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False
#   ]

# Using gathered:
# Device config:

# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Gather IOSXR lldp interfaces configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    state: gathered

# ------------------------
# Module Execution Result
# ------------------------

#   gathered:
#     - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False

# Using rendred:
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
      transmit: false

    - name: GigabitEthernet0/0/0/2
      destination:
        mac_address: ieee-nearest-bridge
      receive: false
    state: rendered

# ------------------------
# Module Execution Result
# ------------------------

# "rendered": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['interface GigabitEthernet0/0/0/1', 'lldp destination mac-address ieee-nearest-non-tmpr-bridge', 'no lldp transmit disable']


Authors

  • Nilashish Chakraborty (@nilashishc)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_lldp_interfaces_module.html