W3cubDocs

/Ansible 2.10

cisco.nxos.nxos_hsrp – Manages HSRP configuration on NX-OS switches.

Note

This plugin is part of the cisco.nxos collection.

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_hsrp.

New in version 1.0.0: of cisco.nxos

Synopsis

  • Manages HSRP configuration on NX-OS switches.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
auth_string
string
Authentication string. If this needs to be hidden(for md5 type), the string should be 7 followed by the key string. Otherwise, it can be 0 followed by key string or just key string (for backward compatibility). For text type, this should be just be a key string. if this is 'default', authentication is removed.
auth_type
string
    Choices:
  • text
  • md5
Authentication type.
group
string / required
HSRP group number.
interface
string / required
Full name of interface that is being managed for HSRP.
preempt
string
    Choices:
  • enabled
  • disabled
Enable/Disable preempt.
priority
string
HSRP priority or keyword 'default'.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli ←
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no ←
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
state
string
    Choices:
  • present ←
  • absent
Specify desired state of the resource.
version
string
    Choices:
  • 1
  • 2
Default:
1
HSRP version.
vip
string
HSRP virtual IP address or keyword 'default'

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • HSRP feature needs to be enabled first on the system.
  • SVIs must exist before using this module.
  • Interface must be a L3 port before using this module.
  • HSRP cannot be configured on loopback interfaces.
  • MD5 authentication is only possible with HSRPv2 while it is ignored if HSRPv1 is used instead, while it will not raise any error. Here we allow MD5 authentication only with HSRPv2 in order to enforce better practice.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: Ensure HSRP is configured with following params on a SVI
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled

- name: Ensure HSRP is configured with following params on a SVI with clear text authentication
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: text
    auth_string: CISCO

- name: Ensure HSRP is configured with md5 authentication and clear authentication
    string
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: md5
    auth_string: 0 1234

- name: Ensure HSRP is configured with md5 authentication and hidden authentication
    string
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: md5
    auth_string: 7 1234

- name: Remove HSRP config for given interface, group, and VIP
  cisco.nxos.nxos_hsrp:
    group: 10
    interface: vlan10
    vip: 10.1.1.1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
commands sent to the device

Sample:
['interface vlan10', 'hsrp version 2', 'hsrp 30', 'ip 10.30.1.1']


Authors

  • Jason Edelman (@jedelman8)
  • Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/nxos/nxos_hsrp_module.html