Note
This plugin is part of the cisco.ucs collection.
To install it use: ansible-galaxy collection install cisco.ucs.
To use it in a playbook, specify: cisco.ucs.ucs_wwn_pool.
New in version 2.5: of cisco.ucs
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| description string | A description of the WWNN or WWPN pool. Enter up to 256 characters. You can use any characters or spaces except the following: ` (accent mark), (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote). aliases: descr | |
| first_addr string | The first initiator in the World Wide Name (WWN) block. This is the From field in the UCS Manager Add WWN Blocks menu. | |
| hostname string / required | IP address or hostname of Cisco UCS Manager. Modules can be used with the UCS Platform Emulator https://cs.co/ucspe
| |
| last_addr string | The last initiator in the World Wide Name (WWN) block. This is the To field in the UCS Manager Add WWN Blocks menu. For WWxN pools, the pool size must be a multiple of ports-per-node + 1. For example, if there are 7 ports per node, the pool size must be a multiple of 8. If there are 63 ports per node, the pool size must be a multiple of 64. | |
| name string / required | The name of the World Wide Node Name (WWNN) or World Wide Port Name (WWPN) pool. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period). You cannot change this name after the WWNN or WWPN pool is created. | |
| order string |
| The Assignment Order field. This can be one of the following: default - Cisco UCS Manager selects a random identity from the pool. sequential - Cisco UCS Manager selects the lowest available identity from the pool. |
| org_dn string | Default: "org-root" | Org dn (distinguished name) |
| password string / required | Password for Cisco UCS Manager authentication. | |
| port integer | Port number to be used during connection (by default uses 443 for https and 80 for http connection). | |
| proxy string | If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080' | |
| purpose string / required |
| Specify whether this is a node (WWNN) or port (WWPN) pool. Optional if state is absent. |
| state string |
| If present, will verify WWNNs/WWPNs are present and will create if needed.If absent, will verify WWNNs/WWPNs are absent and will delete if needed. |
| use_proxy boolean |
| If no, will not use the proxy as defined by system environment variable. |
| use_ssl boolean |
| If no, an HTTP connection will be used instead of the default HTTPS connection. |
| username string | Default: "admin" | Username for Cisco UCS Manager authentication. |
- name: Configure WWNN/WWPN pools
cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWNN-Pool
purpose: node
first_addr: 20:00:00:25:B5:48:00:00
last_addr: 20:00:00:25:B5:48:00:0F
- cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWPN-Pool-A
purpose: port
order: sequential
first_addr: 20:00:00:25:B5:48:0A:00
last_addr: 20:00:00:25:B5:48:0A:0F
- name: Remove WWNN/WWPN pools
cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWNN-Pool
state: absent
- cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWPN-Pool-A
state: absent
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/ucs/ucs_wwn_pool_module.html