Note
This plugin is part of the community.network collection.
To install it use: ansible-galaxy collection install community.network.
To use it in a playbook, specify: community.network.ce_vxlan_arp.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| arp_collect_host string |
| Enables EVN BGP or BGP EVPN to collect host information. |
| arp_suppress string |
| Enables ARP broadcast suppression in a BD. |
| bridge_domain_id string | Specifies a BD(bridge domain) ID. The value is an integer ranging from 1 to 16777215. | |
| evn_bgp string |
| Enables EVN BGP. |
| evn_peer_ip string | Specifies the IP address of an EVN BGP peer. The value is in dotted decimal notation. | |
| evn_reflect_client string |
| Configures the local device as the route reflector (RR) and its peer as the client. |
| evn_server string |
| Configures the local device as the router reflector (RR) on the EVN network. |
| evn_source_ip string | Specifies the source address of an EVN BGP peer. The value is in dotted decimal notation. | |
| host_collect_protocol string |
| Enables EVN BGP or BGP EVPN to advertise host information. |
| state string |
| Determines whether the config should be present or not on the device. |
| vbdif_name string | Full name of VBDIF interface, i.e. Vbdif100. |
Note
network_cli.local connections for legacy playbooks.- name: Vxlan arp module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configure EVN BGP on Layer 2 and Layer 3 VXLAN gateways to establish EVN BGP peer relationships.
community.network.ce_vxlan_arp:
evn_bgp: enable
evn_source_ip: 6.6.6.6
evn_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Configure a Layer 3 VXLAN gateway as a BGP RR.
community.network.ce_vxlan_arp:
evn_bgp: enable
evn_server: enable
provider: "{{ cli }}"
- name: Enable EVN BGP on a Layer 3 VXLAN gateway to collect host information.
community.network.ce_vxlan_arp:
vbdif_name: Vbdif100
arp_collect_host: enable
provider: "{{ cli }}"
- name: Enable Layer 2 and Layer 3 VXLAN gateways to use EVN BGP to advertise host information.
community.network.ce_vxlan_arp:
host_collect_protocol: bgp
provider: "{{ cli }}"
- name: Enable ARP broadcast suppression on a Layer 2 VXLAN gateway.
community.network.ce_vxlan_arp:
bridge_domain_id: 100
arp_suppress: enable
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| changed boolean | always | check to see if a change was made on the device Sample: True |
| end_state dictionary | verbose mode | k/v pairs of configuration after module execution Sample: {'evn_bgp': 'enable', 'evn_peer_ip': ['7.7.7.7'], 'evn_source_ip': '6.6.6.6'} |
| existing dictionary | verbose mode | k/v pairs of existing configuration Sample: {'evn_bgp': 'disable', 'evn_peer_ip': [], 'evn_source_ip': None} |
| proposed dictionary | verbose mode | k/v pairs of parameters passed into module Sample: {'evn_bgp': 'enable', 'evn_peer_ip': '7.7.7.7', 'evn_source_ip': '6.6.6.6', 'state': 'present'} |
| updates list / elements=string | always | commands sent to the device Sample: ['evn bgp', 'source-address 6.6.6.6', 'peer 7.7.7.7'] |
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/ce_vxlan_arp_module.html