W3cubDocs

/Ansible 2.10

community.network.cnos_linkagg – Manage link aggregation groups on Lenovo CNOS devices

Note

This plugin is part of the community.network collection.

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_linkagg.

Synopsis

  • This module provides declarative management of link aggregation groups on Lenovo CNOS network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
string
List of link aggregation definitions.
group
string
Channel-group number for the port-channel Link aggregation group. Range 1-255.
members
string
List of members of the link aggregation group.
mode
string
    Choices:
  • active
  • on
  • passive
Mode of the link aggregation group.
provider
string
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the CNOS Platform Options guide.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string / required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
string
Default:
22
Specifies the port to use when building the connection to the remote device.
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
string
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
purge
boolean
    Choices:
  • no
  • yes
Purge links not defined in the aggregate parameter.
state
string
    Choices:
  • present
  • absent
State of the link aggregation group.

Notes

Note

  • Tested against CNOS 10.8.1

Examples

- name: Create link aggregation group
  community.network.cnos_linkagg:
    group: 10
    state: present

- name: Delete link aggregation group
  community.network.cnos_linkagg:
    group: 10
    state: absent

- name: Set link aggregation group to members
  community.network.cnos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet1/33
      - Ethernet1/44

- name: Remove link aggregation group from GigabitEthernet0/0
  community.network.cnos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet1/33

- name: Create aggregate of linkagg definitions
  community.network.cnos_linkagg:
    aggregate:
      - { group: 3, mode: on, members: [Ethernet1/33] }
      - { group: 100, mode: passive, members: [Ethernet1/44] }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['interface port-channel 30', 'interface Ethernet1/33', 'channel-group 30 mode on', 'no interface port-channel 30']


Authors

  • Anil Kumar Muraleedharan (@auraleedhar)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/cnos_linkagg_module.html